Instruction/ maintenance manual of the product SM-T400i-DB50 Star Micronics
Go to page of 31
Mobile Printer SM-T400 I SERIES Hardware Manual.
<USA model> Feder al Communications C ommission Radio Frequency Interference Statemen t This device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions.
T rademark acknowledgments SM-T400I : Star Micronics Co., Ltd. Notice • Allrightsreserved.Reproductionofanypartofthismanualinanyformwhatsoever ,withoutST AR’ s expresspermissionisforbidden.
Caution S ymbol This symbol is placed near the thermal head to indicat e that it may be hot. Never touch the thermal head immediately after the print er has been used. Let the thermal head cool for a f ew minutes before touching it. This symbol is placed near the thermal head to indicat e that it is easily damaged.
n U sing the P rinter P Some semiconducto rs can b e damaged b y static electr icity . B e sure to t urn o the prin ter when inserting or rem oving the ba ttery pack. P Do not dro p t he prin ter or hit it a gainst a ha rd ob j ect. P Do not open the prin ter cover while the print er is prin ting.
n Oper a ting En vironmen t fo r the Printe r Befor e actually unpacking the printer , you should take a f ew minutes to think about wher e you plan to use it. Remember the follo wing points when doing this. P Do not use the prin ter in an en vironmen t in which it will be subject to stro ng shaking while it is prin ting.
T able of C onten ts 1. Pr oduc t O verview ...................................................................................... 1 1.1 Printer & Ac cessories........................................................................................
- 1 - 1. Pr o duc t Over view This printer is perfect for mobile bank ing systems , retail, POS (point of sale) terminals and other forms of mobile computing . The characteristics of this printer are list ed below: • Compact size (150.9 ×136.6 × 63.
- 2 - Shoulder Strap 1.1 Prin ter & A cc essories The printer is packaged with the following acc essor ies. If any of these accessories is broken or missing , please contact the dealer that you bought the pr oduc t. u The optional items f or this printer are listed below .
- 3 - 1.2 External Appearanc e and P ar t Names Serial Connector Charge Connector Mechanism Black Mark Sensor Paper End Sensor Platen Gear Printer C over Platen * Remove the lms if you do not need them.
- 4 - 2. Setup 2.1 Battery Pack 2.1.1 I nserting into the Printer 1. Make sur e that the printer has been turned o befor e you insert or remove the batt er y pack. 2. Insert the batter y pack into the back of the print er as in the gure shown belo w, f ollowing the di - rection of the arrow .
- 5 - 2.1.2 Charging the Battery Inser t the batter y pack into the printer t o charge it. Inser t the batter y charger cable int o the printer ’ s power inlet f or charging. Notes about the Batter y Pack u General Battery Characteristics • The battery is a consumable and its per formance ov er time will gradually decr ease.
- 6 - < F or U.S.A. and Canada > Lithium-Ionbatteriesarer ecyclable. Y oucanhelppreserveourenvironmentb yre - turning your used rechar geable batteries to the collection and recycling location nearest you .
- 7 - 2.2 Bluetooth Settings 2.2.1 connection 1. Pr ess and hold POWER for appro x. 3 seconds, and printer is turned on. Then, it is r eady to pair with another Bluetooth device . 2. If necessar y , enter the following inf or mation into the t erminal that you are using .
- 8 - 2.2.2 Auto C onnection Function (only for iOS *1 ) When the Bluetooth connection with your iOS devic e (*2 is disconnected, it is r equired to establish a connection by tapping the printer you wan t to use on the Bluetooth setting screen.
- 9 - 2.3 Loading P aper Refer to chapter 4, “P aper ” (p. 19), t o select roll paper that conforms to the specica tions. 1. T urn on the printer . 2. Put y our nger on the switch for opening the co ver , and then open and raise the printer cov er .
- 10 - CA UTION When the paper is jammed, be sure to open the printer co ver before removing the j ammed paper . Do not under any circumstances try to pull out the jammed paper forcefully while the printer cov er is close d. Doing so may damage par ts of the printer .
- 11 - 2.4 Memor y Switch Settings Change the Memor y switch by f ollowing operations . (Refer to page 13 “Memor y Switch Setting T able”). 1. Pr ess and hold POWER for appro x. 3 seconds, and printer is turned on. 2. T o put the printer into Memory Switch Setting mode, press and hold both the POWER & FEED buttons for 3 sec onds.
- 12 - * Example: When you wan t to change the settings of the printer mode as shown belo w , <Before> Bluetooth/9600BPS/8DA T ABIT/NOP ARIT Y/1STOPB.
- 13 - Memor y Switch Setting T able Print er Mode Setting Display 1 Communication P or t v 1) RS-232C U AR T Mode Bluetooth Bluetooth Mode Bluetooth(iOS) * Bluetooth(iAP) 2 Baud Rate 9600 bps 9600 BP.
- 14 - v 1) Communica tion mode It is possible to change the communication mode setting between Bluetooth and serial. Please see below for details t o selec t the proper communication mode f or your application. Bluetooth (iOS): The display sho ws [Bluetooth(iAP)].
- 15 - 2.5 Belt Clip 2.5.1 Attaching to the Prin ter F ollow the procedure belo w to attach the belt clip to the printer . 1. Make sure that you are attaching the belt clip in the right orientation, then scr ew the screw that comes with the belt clip into the desig nated screw hole t o attach the belt clip to the printer .
- 16 - 3.1.1 Button 1) POWER Button : 1 P ressing and holding the POWER button for 3 seconds or mor e will turn the power on or o . 2 P ressing both the POWER and FEED buttons simultaneously will cause the ERROR lamp to ash 5 times and put the printer into Memory Switch Setting mode.
- 17 - 3.2 Self T est Y oucanuseaselftesttochecktheprinter ’ ssettings. Before y ou star t the self test, make sure that roll paper has been pr operly loaded into the printer . 3.2.1 Self T est Procedur e 1) T urn on the power while holding down FEED .
- 18 - 3.3 Instruc tion for A uto P ower Down(S leep) Mode The printer in the P ower Down(Sleep) Mode will rec over to the P rint Ready M ode when receiving commands or button operations . Howev er , print data received while shifting from the Sleep Mode to the print Ready Mode (for ap - pro x.
- 19 - 4.1.2 Recommended Paper Manufacturer Product Name Mitsubishi Paper Mills Limited P220AG Oji Paper C o., Ltd. PD450 APPLETON Alpha 800-2.4 KANZAKI (Oji Paper USA ) P-350 4.1.3 Printing Range 4. P aper 4.1 Thermal P aper 4.1.1 Paper Specications P aper width : 111.
- 20 - 4.2.2 Recommended Paper Manufacturer Product Name Black Mark RICOH 150PSMW Back reading 4.2.3 Printing Range 4.2 Thermal Label 4.2.1 Paper Specications P aper width : 112.5±0.5mm P aper thickness : 115±15 µm Outer diameter : Ø50 mm or less Inner diameter : Ø25 mm or more Recording side : Outside of roll 4.
- 21 - 5. General Specications Item Specications Printing method Direct line thermal printing Characters per line Maximum 92 cpl Character size Alphanumericcharacters:9X24dots,.
- 22 - n Dimensions External Dimensions : 150.9 mm ( W ) × 136.6 mm (D) × 63.3 mm (H) <Model without Card Reader> 150.9 mm ( W ) × 143.2 mm (D) × 63.3 mm (H) <Model with Card Reader> W eight : 735 g (Including Battery Pack) Body Color : Gra y and Black <Model without Card Reader> <Model with Card Reader> 150.
Application of Council Directive(s) 1999/5/EC of 9 Mar. 1999 2011/65/EU of 8 Jun 2011 Standard(s) to which Conformity is Declared RADIO ： EN 300 328 V1.
URL : http://www .starmicro nics.com/sup port/ Rev . 1.1.
An important point after buying a device Star Micronics SM-T400i-DB50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Micronics SM-T400i-DB50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics SM-T400i-DB50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics SM-T400i-DB50 you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics SM-T400i-DB50 will certainly help you make a decision on the purchase.
If you already are a holder of Star Micronics SM-T400i-DB50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics SM-T400i-DB50.
However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics SM-T400i-DB50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics SM-T400i-DB50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
