Instruction/ maintenance manual of the product IS-NP192 Star Micronics
Go to page of 20
USER’S MANUAL Р УК ОВ О ДСТВО ПОЛЬ ЗОВА ТЕЛЯ SERIAL INTERF ACE UNIT МО ДУ ЛЬ ПОС ЛЕД ОВА ТЕ ЛЬНОГ О ИНТЕР ФЕЙСА IS-NP192 PBA10 SIF 80825940.
Notice • All rights reserved. Reproduction of any part of this manual in any form whatsoever , without ST AR’s express permission is forbidden. • The contents of this manual are subject to change without notice. • All ef forts have been made to ensure the accuracy of the contents of this manual at the time of going to press.
English CONTENTS Chapter 1: Serial Interface Unit .............................................................. 2 Unpacking .......................................................................................... 2 Chapter 2: Installation .........
2 Serial Interface Unit This serial interface unit makes it possible for your printer to communicate with your computer using serial data. This manual describes the operational procedures for using the serial interface unit. Unpacking • After removing the contents from the packaging, check to make sure you have all seven items.
3 English Installing the serial interface unit • First remove the printer cover by pushing in the tabs located on both sides of the lower rear of the printer with a screwdriver as illustrated below . • Set the DIP switches on the serial interface unit to the settings that you want.
4 And secure interface unit in place with the two small screws. Finally , install the printer cover. Connecting a serial cable • Unplug the printer from its AC power outlet. Plug one end of a serial cable into the printer’s serial port and secure it in place with the two screws on the cable.
5 English NOTE: The printer is equipped with a serial interface for connecting the op- tional serial interface unit. This makes it possible to connect two separate computers for serial data communication.
6 Switch 2: Parity Check This switch specifies whether or not a parity check should be performed on the data. Parity Check SW2 DOS Setting Disabled ON Disabled Enabled OFF Enabled Switch 3: Parity This switch specifies the parity as non, odd, or even.
7 English Baud Rate SW1 SW2 SW3 DOS Setting 300 OFF OFF OFF 300 600 ON OFF OFF 600 1200 OFF ON OFF 1200 2400 ON ON OFF 2400 4800 OFF OFF ON 4800 9600 ON OFF ON 9600 19200 OFF ON ON 19200 9600 ON ON ON.
8 T echnical Specifications (Input) Interface: RS-232C-level Synchronization: Asynchronous Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200 BPS (selectable) W ord length Start bit:2 1 Data bits: 7 o.
Ру сский СОДЕРЖАНИЕ Г лав а 1: М одуль последо в ат ельного интерфейса ................................ 10 Распак овка ...................................................................
10 Модуль последовательног о интерфейса Данный мо д у ль по сл едова тельного инт ерфейса позв о лит Вашему при.
11 Ру сский Инсталляция модуля последовательног о интерфейса • Прежд е вс ег о снимите крышк у принтера; для э .
12 Зате м з акрепите мо д уль интерфейса в э том по л о ж ении с помощью дв у х малых винтов.
13 Ру сский ПРИМЕЧАНИЕ: Принтер имеет после дова тельный интерфейс для по дсоединения опционального мо дуля после довательного интерфейса.
14 Переключатель 2: Проверка четности Эт о т переклю чат е ль пок азывает, проводит ся или нет проверка четно сти данных.
15 Ру сский Ск орос ть в бодах SW1 SW2 SW3 Выс тавка D OS 300 OFF OFF OFF 300 600 ON OFF OFF 600 1200 OFF ON OFF 1200 2400 ON ON OFF 2400 4800 OFF OFF ON 4800 9600 ON OFF .
16 Т ехнические у словия (Вх од) Интерфейс: RS-232C-leve l Синхронизация: А синхронная Ск орость в бодах: 300, 600, 1200, 2400, 480.
.
ST AR MICRONICS ASIA LTD. Rm 1802-6, 18/F ., T ower 2, Enterprise Square 9 Sheung Y uet Road, Kowloon Bay Hong Kong T el: 852-2796-2727 Fax: 852-2799-9344 KEI • INTERNA TIONAL CORPORA TION Matsuya Bldg.
An important point after buying a device Star Micronics IS-NP192 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Micronics IS-NP192 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Micronics IS-NP192 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Micronics IS-NP192 you will learn all the available features of the product, as well as information on its operation. The information that you get Star Micronics IS-NP192 will certainly help you make a decision on the purchase.
If you already are a holder of Star Micronics IS-NP192, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Micronics IS-NP192.
However, one of the most important roles played by the user manual is to help in solving problems with Star Micronics IS-NP192. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Micronics IS-NP192 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
