Instruction/ maintenance manual of the product PRO-MAX CG10 Star Manufacturing
Go to page of 20
1 ® ® ® ® T W O-SIDED GRILLS MODEL C G10, GR10 C G14 & GR14 Installation and Opera tion Instruc tions 2M-Z2906 Rev . M 6/22/06 14 x 14 Groov ed Grill.
2 2 These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RET AIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability .
3 GR10-120V - Smooth T op and Bottom Platens Aluminum, without T imer GR10-120VC-Smooth T op and Bottom Platens Aluminum, without T imer Canadian GR10T -120V - Smooth T op and Bottom Platens Aluminum,.
4 CG14T -120V - Aluminum Grooved T op and Bottom Platens, with T imer CG14T -120VC-Aluminum Grooved T op and Bottom Platens, with T imer Canadian CG14-240V - Aluminum Grooved T op and Bottom Platens ,.
5 GENERAL INST ALLA TION DA T A CAUTION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
6 Note: For Canada, 120 volt units listed above have NEMA 5-20P plug. Model No. V olts Rated W attage Amps NEMA Plug GR 14 120 1800 15 5-15P GR 14 240 1800 7.
7 SETTING THE TEMPERA TURE The thermostat control knob is used to set the temperature to your requirements. The maximum set point is 550°F (288°C), the minimum set point is 175°F (79°C). See Knob Settings. SETTING THE TIMER (TIMER MODELS ONL Y) (9 MIN.
8 OPERA TING HINTS AND SAFETY Disconnect power to the unit with the switch at the end of each day of operation. Do not leave the unit in operation without an attendant. T urn thermostat down to 200°F (93°C) during idle periods. It will take only a few minutes to regain operating temperature.
9 W ARNING Do not use ice or cold water to clean the cooking surfaces when the unit is hot. The surfaces are cast aluminum or cast iron and may crack or deform under the shock of rapid temperature change.
10 Part# 2M-4497-2 05/06 RB The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty. FOR ASSISTANCE Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Ser vice Department.
11 (ELEMENTO MAS BAJO) BOTTOM ELEMENT (ELEMENTO MAS AL TO) TOP ELEMENT 5-15P PLUG STD (NEGRO) BLACK (VERDE) GREEN (BLANCO) WHITE T- S TAT FRONT CONTROL P ANEL WIRE NO P ART NO.
12 (ELEMENTO MAS BAJO) BOTTOM ELEMENT (ELEMENTO MAS AL TO) TOP ELEMENT 6-15P PLUG (NEGRO) BLACK (VERDE) GREEN (BLANCO) WHITE T- S TAT FRONT CONTROL P ANEL PILOT LIGHT (BLOQUE TERMINAL) TERM BLOCK REAR P ANEL 1 3 2 INLET IEC 320 16A 230V UNIT 19 18 20 L N G WIRE NO P ART NO.
13 (ELEMENTO MAS BAJO) BOTTOM ELEMENT (ELEMENTO MAS AL TO) TOP ELEMENT NEMA 6-20P PLUG (NEGRO) BLACK (VERDE) GREEN (BLANCO) WHITE T -ST A T FRONT CONTROL P ANEL PILOT LIGHT (BLOQUE TERMINAL) TERM BLOCK REAR P ANEL 1 3 2 INLET IEC 320 16A 230V UNITS (CANTIDAD) QTY .
14 B A C D GREEN BLACK WHITE 15 AMP PLUG NEMA 5-15P ON ALL 120V UNITS. NEMA 6-15P ON 240V , 1,800 WA TT UNITS. 20 AMP PLUG NEMA 6-20P ON 240V , 3,600 WA TT UNITS. TOP ELEMENT TRANSFORMER TERMINAL BLOCK FOR REFERENCE WIRING DIAGRAM IS SHOWN AS UNIT IS ASSEMBLED WITH THE BOTTOM PLA TE REMOVED.
15 ST AR MANUF ACTURING INTERNA TIONAL, INC. GR14,GR14I,CG14,CG14I,CG14IGT SK1687 REV . C 10/13/05 4 /0 4 /0 /. /. 0/ 7%2 0/ 7%2 4)-% 4)-% 34 !2 4 34 !2 4 34 /0 34 /0 35 22 23 38 12 12 31 .
16 P ARTS LIST June 22, 2006, Rev . K 10' TWO SIDED GRILLS IMPORT ANT : WHEN ORDERING, SPECIFY VOL T AGE OR TYPE DESIRED P AGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available.
17 Number Per Unit MODEL Part Number Key Number 39 D9-GR0062 1 BODY ASSY . - 10” 40 2J-Z1836 1 TIMER CONTROL CG10T , CG10IT , GR10T , GR10IT 41 2K-Z1971 4 SP ACER CG10T , CG10IT , GR10T , GR10IT 42 .
18 IMPORT ANT : WHEN ORDERING, SPECIFY VOL T AGE OR TYPE DESIRED P AGE INCLUDE MODEL AND SERIAL NUMBER OF 1 2C-Z2992 2 SCREW , HANDLE 2 2V -Z2989 1 HANDLE - 14” 2 2V -Z3413 1 HANDLE - 14” S.
19 IMPORT ANT : WHEN ORDERING, SPECIFY VOL T AGE OR TYPE DESIRED P AGE INCLUDE MODEL AND SERIAL NUMBER OF Number Per Unit MODEL Part Number Key Number Some items are included for illustrative purposes only and in certain instances may not be available.
20 IMPORT ANT : WHEN ORDERING, SPECIFY VOL T AGE OR TYPE DESIRED P AGE INCLUDE MODEL AND SERIAL NUMBER OF Number Per Unit MODEL Part Number Key Number Some items are included for illustrative purposes only and in certain instances may not be available.
An important point after buying a device Star Manufacturing PRO-MAX CG10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Star Manufacturing PRO-MAX CG10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Star Manufacturing PRO-MAX CG10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Star Manufacturing PRO-MAX CG10 you will learn all the available features of the product, as well as information on its operation. The information that you get Star Manufacturing PRO-MAX CG10 will certainly help you make a decision on the purchase.
If you already are a holder of Star Manufacturing PRO-MAX CG10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Star Manufacturing PRO-MAX CG10.
However, one of the most important roles played by the user manual is to help in solving problems with Star Manufacturing PRO-MAX CG10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Star Manufacturing PRO-MAX CG10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
