Instruction/ maintenance manual of the product VRM-10 Stanton
Go to page of 8
OWNER’S M A N U A L VRM-10 Professional Valve DJ mixer.
INPUTS AND OUTPUTS (Rear) Aside from the headphone output and microphone jacks, all connections are on the rear of the VRM10. A Mains plug with fuse and voltage selector . Changing the fuse: The lid for the housing of both fuses can easily be opened by pressing both sides of the lid simulta- neously.
U BOOTH The output value of the BOOTH is set at 0dBu. It can be adjusted via the control knob BOOTH (49) NOTE : BOOTH output is not affected by any balance/pan setting (50). V MASTER 2 The output MASTER 2 is identical to MASTER 1. It has an output impedance of +6dBu, which can be adjusted by the MASTER 2 control.
MICROPHONE CHANNEL 3 DJ MIC 2 4 DJ MIC 1 Both mic inputs can be used as symmetrical or non- sym- metrical (balanced or non-balanced) channels with either XLR or 1/4” jacks, with the provided combo c.
effect individually. The middle position of this control will have the value of the individual selected effect preset indi- cated in the diagram above. 18 DEPTH With this control you can adjust the intensity of the LFO 19 SELECT With this switch you can choose the channel on which the effect should work.
35/36 CROSSFADE LED’ s The LED’s located left and right of the crossfader indicate, which input channel lies on which side of the crossfader according to the crossfader assign switch (22). 37 CROSSFADE CURVE With this control you adjust the crossfade curve.
Ohm. You will hear the master signal in your headphones if you haven’t selected any of these options: PFL (31), EFFECT (57) and FILTER (56). 56 FILTER When the FILTER switch (56) is selected, you will hear the mixed master signal before the activated DJ filter or master effect.
BLOCK DIAGRAM.
An important point after buying a device Stanton VRM-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton VRM-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton VRM-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton VRM-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton VRM-10 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton VRM-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton VRM-10.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton VRM-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton VRM-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
