Instruction/ maintenance manual of the product SMX.211 Stanton
Go to page of 9
.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – A ll the safety and operating instructions should be read before this product is operated. 2. Retain Instructions － The safety and operating instructions should be retained for future reference.
FEATURES Compact design User replaceable crossfader 2 phono, 2 line, 1 microphone input Gain, Treble, and Bass Controls on Channels Powerful stereo headphone output Cue Pan Selector (Ch.1-Ch.2) Bright LED Output Indicators Selectable Fader Start (Ch.
MIXER FEATURES 1. Input fader - Controls individual source levels (channels) in the mix. 2. Input toggle switch - Selects which source will be active based on what you have connected to the rear panel input section (phono/line). 3. Treble and Bass EQ - Adjusts the high and low frequency levels of the input channels for good sound.
QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks.
SPECIFICATIONS SENSITIVITY OF INPUT (LEVEL/IMPEDANCE): LINE -14dB/47K OHM ±3dB PHONO -50dB / 47K OHM ±3dB MIC -54dB /6K OHM ±3dB OUTPUT (LEVEL/IMPEDANCE): MASTER (RCA) 0dB/47K OHM ±3dB PHONES (LOAD=32 OHM) -3dB/33 OHM ±3dB MAX. OUTPUT (LOAD=47K, THD=5%) MASTER (RCA) MORE THAN 18dB (8V) PHONES (LOAD=32 OHM) MORE THAN 5dB (1.
Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W ARRANTY RETURNS Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.
ST ANT ON W ARRANTY REGISTRA TION CARD PERSONAL INFO PRODUCT INFO Name Address City State Zip Country T elephone Model Number Serial Number Date of Purchase Where did you buy this product? If yo u ha ve in ter ne t a cce ss , p lea se re gis te r y ou r pr od uc t at www .
PLACE ST AMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A..
An important point after buying a device Stanton SMX.211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton SMX.211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton SMX.211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton SMX.211 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton SMX.211 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton SMX.211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton SMX.211.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton SMX.211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton SMX.211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
