Instruction/ maintenance manual of the product S-650 MK II Stanton
Go to page of 15
PROFES SIONAL DU AL CD PLA YER TRACK M S F REMAIN CONTINU TRACK M S F REMAIN CONTINU.
IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the pow er supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – A ll the safety and operating instructions should be read before this product is operated. 2. Retain Instructions － The safety and operating instructions should be retained for future reference.
NOTE ON USAGE Allow for sufficient heat dispersion when installed on a rack. Handle the power cord carefully. Hold the plug when unplugging the cord. Keep the appliance free from moisture, water, and dust. Unplug the power cord when not using t he appliance for long periods of time.
NAMES AND FUNCTIONS (4) REMOTE CONTROL CONNECTOR Connect this connector to the control unit using the included control cord. (5) DIGITAL OUT SOCKET The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for example.
NAMES AND FUNCTIONS (10)Pitch Slider Use the slider to adjust the CD pitch. Slide up to decrease the pitch, down to increase the pitch. (11)JOG (Jog Dial) During PLAY, the jog dial is used temporarily bending the pi tch (pitch bend). When CD is paused, the jog dial is used for frame search each segment of the dial represents a fram e.
NAMES AND FUNCTIONS LCD (24) ~(27)TRACK, MINUTE, SECOND and FRAME Display These displays indicate information for the CD’s current position and time. (28) BAR Indicator These ten indicators provide a visual display of the approximate position of the pickup within the current track.
OPERATIONS 1. Opening and Closing the Disc Holder Turn the unit power on. Press the OPEN/CLOSE bu tton to open the disc holder. OPEN/CLOSE buttons are provided on both the main unit and control unit. The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally.
OPERATIONS 6. Pausing ˙ Press the PLAY/PAUSE button to switch between play and pause. ˙ The play indicator flashes when the pause mode is set. ˙ Figure 6 show the relationship between the play and pause. Figure 6 The player has completed the cue or pause operation and is waiting for the play start command.
OPERATIONS 11. Matching the Beats Per Minute (BPM ) There are two tools available for matching the BPM of the two CDs: Use the pitch slider to adjust the BPM.
OPERATIONS d- T o exit SEAMLESS LOOP , press OUT/EXIT BUTTON . LED w ill stay on but not flash. Music will resume normal play . e- T o replay loop, press the RELOOP BUTT ON. IN/R .CUE and OUT/EXIT LED will all begin flashing again. 14.Relay Play The relay play is explained as below .
BEFORE SWITCHING OFF THE POWER When you have finished using the CD pl ayer, before switching off the power , be sure that the disc holder had been closed with the OPEN/CLOSE button. CAUTION: Do not forcibly close the disc holder when the power is off.
Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W ARRANTY RETURNS Through Stanton’ s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.
ST ANT ON W ARRANTY REGISTRA TION CARD PERSONAL INFO PRODUCT INFO Name Address City State Zip Country T elephone Model Number Serial Number Date of Purchase Where did you buy this product? If yo u h av e i nte rn et ac ce ss , p lea se re gis te r y ou r p rod uc t a t www .
PLACE ST AMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A..
An important point after buying a device Stanton S-650 MK II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton S-650 MK II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton S-650 MK II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton S-650 MK II you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton S-650 MK II will certainly help you make a decision on the purchase.
If you already are a holder of Stanton S-650 MK II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton S-650 MK II.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton S-650 MK II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton S-650 MK II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
