Instruction/ maintenance manual of the product RM-402 Stanton
Go to page of 12
RM.402 Professional DJ Mixer ST ANT ON MAGNETICS, Inc. information@stantondj.com © 2004 Stanton Magnetics, Inc. OWNER’S M A N U A L.
Please read carefully before use of this product failure to follow the instructions printed below may void warranty • Follow all security advice printed on your mixer • When removing the unit&apos.
Congratulations on your choice of the Stanton RM.402 Professional DJ Mixer . Y ou now own one of the most flexible DJ mixers ever designed. The rackmountable RM.402 of fers up to three Microphone inputs, three Phono inputs and nine Line inputs—making it one of the most powerful DJ mixers around.
Making Connections Are you ready to get on the 1’s and 2’ s? Let’ s make sure you’ve made all the right connections… Mic 2 Here you can connect a microphone using a 1/4-inch cable. If you have an XLR-type cable, use the Mic 1 input located on the front panel.
Outputs Use the REC output to connect a stand-alone CD recorder , DA T recorder , or tape deck. Use the BOOTH output to connect directly to powered monitors or your monitor amp. The ZONE output can be used if you need separate level control for a particular area of your club, such as lounge vs.
Description of Functions At this point, you’re pretty much ready to start mixing. So if you’re a know-it-all, or you’re just one of those people who like to learn by trial- and-error , you are free to throw down. But if you wanna go for the gold and get your pilot’s license, take a moment and learn what each of the RM.
Description of Functions 6. Headphone outputs: Connect up to two pairs of stereo headphones using 1/4-inch and 1/8-inch jacks. 7. Cue Pan slider: This adjusts the relative headphone balance between the Cue mix (PFL) and Master output (PGM).
16. Input Selector switches: Use these to choose between the Phono, Line and Mic inputs. 17. T alkover switch: Switch this to the “ON” position to enable Microphones 1 and 2. When moved to the “T alkover” position, the music is lowered by a preset amount wh e n t h e m i c i s in u se .
This is a typical setup you’ll find in many nightclubs: 2 turntables, 2 CD players, plus a microphone for the DJ. Here’s how you would set up your equipment with the RM.402: 1. Be sure all equipment is powered “OFF” and all of the RM.402’s Channel faders and Level knobs are at minimum volume.
T echnical Specifications Frequency Response THD+N (Line) Signal to Noise Ratio (ref: max level) Noise Crosstalk (Line to Line, Phono to Line, Line to Phono) Fader Kill Microphone EQ Graphic EQ (7 ban.
T roubleshooting Problem / Symptom Possible Cause/ Solution No Sound Is the power on? Check the power switch.Make sure the channels are assigned properly to the crossfaders. Make sure INPUT GAIN, is turned up and output level control is turned up. Depending on the input, check the rear panel selector switches.
Sound is distorted Phono Input Only plug turntables into this input, do not plug in CD players or other Line Level sources. T urn down the INPUT GAIN CONTROL I hear hum. Make sure you are using good shielded audio cables. Some less expensive audio cables can be susceptible to hum and interference.
An important point after buying a device Stanton RM-402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton RM-402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton RM-402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton RM-402 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton RM-402 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton RM-402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton RM-402.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton RM-402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton RM-402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
