Instruction/ maintenance manual of the product M.303 Stanton
Go to page of 9
M M . . 3 3 0 0 3 3 PROFESSIONAL DJ MIXER ST ANTON MAGNETICS, INC information@stantondj.com www .stantondj.com OWNER’S M A N U A L.
PLEASE READ CAREFULL Y BEFORE USE F AILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MA Y VOID W ARRANTY • Follow all security advice printed on your mixer • When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itself! • Avoid placing your mixer near heat sources, such as power amplifiers.
Removing a fader : 1. Make sure mixer is powered off and power supply is disconnected from back of mixer . 2. Remove the fader to be cleaned or replaced by unscrewing the 2 outer screws on the fader plate (removing the 2 inner screws will detach the fader from the fader plate).
DESCRIPTION OF FUNCTIONS 4 3 2 7 7 6 8 1 15 16 17 17 17 14 13 12 11 10 9 5.
1. Microphone 1 input - This combo (1/4”/XLR) connector is used to connect a microphone. The volume is controlled by the MIC 1 knob. 2. Mic 1 level - Controls the input level of Microphone input 1. 3. Mic equalizer - Individual controls for high frequency , midrange, and low frequency equalization.
DESCRIPTION OF FUNCTIONS Power : This is the power switch to turn the mixer "ON" or "OFF" AC IN : This is the Input connection for the included power supply .
The audio quality of the M.303 is nothing short of revolutionary for DJ mixers in its price class. The M.303 was designed by Stanton’ s new product development team, seasoned audio professionals who.
The following user replaceable parts are available from your local Stanton dealer . LF303 Line fader CF303 Crossfader PS-16US US Power Supply (1 10v) PS-16EU European Power Supply (220v) PS-16UK UK on.
W ARRANTY Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W arranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’ s authorized distributors outside the U.
An important point after buying a device Stanton M.303 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton M.303 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton M.303 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton M.303 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton M.303 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton M.303, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton M.303.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton M.303. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton M.303 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
