Instruction/ maintenance manual of the product M.202 Stanton
Go to page of 9
PROFESSIONAL DJ MIXER.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these Instructions 2. Keep these Instructions 3. Heed all Warnings 4. Follow all Instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
MIXER CONTENTS 1 2 4 5 6 78 11 10 9 13 12 14 3 15 1 9 2 0 2 2 2 1 1 8 1 7 1 6.
MIXER CONTENTS 1. Input fader - Controls individual source levels (channels) in the mix. 2. Input toggle switch - Selects which source will be active based on what you have connected to the rear panel input section (phono/line). 3. Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for good sound.
QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connec t your microphone and monitor headphones. Finally, connect the stereo outputs to the pow er amplifier(s) and/or audio receivers such as tape decks.
SPECIFICATIONS INPUT / OUTPUT IMPEDANCE & SENSITIVITY: LINE -14dB/10K OHM ±2dB PHONO -50dB /47K OHM ±2dB MIC -60dB /2.2K OHM ±2dB MASTER 1K OHM PHONES 0dB/33 OHM ±2dB (LOAD=32 OHM) MAX.
St anton Magnetics, Inc. – Warranty Provision – Returns for Rep airs or Replacem ent W ARRANTY Through S tanton’s auth ori zed dealers around the W orld, S tanton, or one of S tanton’ s authorized distributor s outside the U.
ST ANTON W ARRANTY REGISTRA TION CARD PERSONAL INFO PRODUCT INFO Name Address City State Zip Country T elephone Model Number Serial Number Date of Purchase Where did you buy this product? If you have internet access, please register your product at www .
PLACE ST AMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A..
An important point after buying a device Stanton M.202 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton M.202 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton M.202 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton M.202 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton M.202 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton M.202, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton M.202.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton M.202. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton M.202 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
