Instruction/ maintenance manual of the product DJLab 2.1 Stanton
Go to page of 12
DJLab 2.1 Complete DJ System USER’S MANUAL . 5 0 3 0 . 5 . 5 0 3 0 . 5.
2 IMPORT ANT SAFETY PREC A UTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference.
Thank you for purchasing St anton’s newest i nnovation in professional tabletop mixer . The M.212 mixer was designed to bring styl e and reliability to the mobile or club DJ at an affordable cost.
M.212 C ONTROL OVERVIEW TOP P AN EL 4 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. Reduce the channel gain if you notice the level indicators flashing red. 2. Mic Input Gain - Adjusts microphone input level. 3. Mic EQ - The mic channel includes a two-band EQ with a range of +10dB to -10dB.
M.212 C ONTROL OVERVIEW REAR P ANEL 5 16. Power Switch - T urns unit off and on. 17. Power Connector - Plug in the included power supply here. 18. Fader Start Control Jacks - Connect these jacks to the Fader input jacks of the CD player using the 3.5mm stereo mini cord.
Review this setup diagram. Make sure all faders are at "zero" and a ll devices are off. First, connect a ll input sources and processor s. Next, connect your microphone and monitor headphones. Finally , con nect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks.
Input / output impedance & sensitivity: (Master 0dBV output, load=100Kohm, Max. gain, EQ flat) Line 10K ohm /-14dBV (200mV) +/-2dB Phono 47K ohm /-50dBV (3.16mV) +/-2dB Mic 2.2K ohm /-60dBV (1mV) +/-2dB Master 1K ohm Phones 33 ohm / 0dBV (1V) ±2dB Max.
Thank you for purchasing the T .62 turntable from St anton. T he T .62 is built upon S tanton’s heritage of designing audiophile pro duct s for the most discriminating listener . Before assembling the T .62 please check to make sure the following items are included with the ma in unit in the carton.
1. Rotate the power dial clockwise to turn on the powe r , the speed indicator and the strobe-illuminator will light up. 2. Place a record on the slip mat, when playing a 45rpm record with a large center hole, place the 45-rpm adaptor on the center spindle.
1. St art/St op - Press this button t o start or stop th e platter . 2. Strobe dot s - The dots around the edge of the p latter are used in conjunction with the light locat ed inside the motor ON/OFF swit ch. While the platter is in rotation, the dots help to indicate the speed of rotation.
GENERAL Model: T .62 Dimensions 452 (W) x 370 (D) x 87 (H) mm s g K 3 . 6 t h g i e W Power supply AC 100V , 50/60 Hz (For Japan) ) n a w i a T r o F ( z H 0 6 , V 0 1 1 C A ) o c i x e M , a d a n a C , .
Copyright © 2008 Stanton Magnetics, Inc. DJLab, M.212, T .52 , and T .62 are trademarks of the Stanton Group. All other trademarks are property of their respective owners, who are not affiliated with Stanton DJ. All information included in this User Manual is subject to change without notice.
An important point after buying a device Stanton DJLab 2.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton DJLab 2.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton DJLab 2.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton DJLab 2.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton DJLab 2.1 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton DJLab 2.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton DJLab 2.1.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton DJLab 2.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton DJLab 2.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
