Instruction/ maintenance manual of the product TJ10 Stanley Black & Decker
Go to page of 18
S afety , O pera tiOn and M aintenance USer'S ManUaL TJ10 HYDRAULIC TRACK JACK © 201 1 Stanley Black & Decker , Inc. New Britain, CT 06053 U.
2 ► TJ10 User Manual SERVICING : This manual contains safety , and operation instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be per - formed by an authorized and certied dealer .
TJ10 User Manual ► 3 DECLARA TION OF CONFORMITY DECLARATION OF CONF ORMI TY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONFOR MITE CEE DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFORM ITA Hyd.
4 ► TJ10 User Manual SAFETY SYMBOLS Safety symbols and signal words, as shown below , are used to emphasize all operator , maintenance and repair actions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equip- ment.
TJ10 User Manual ► 5 SAFETY PRECAUTIONS T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety .
6 ► TJ10 User Manual GENERAL SAFETY PRECAUTIONS CONTINUED: • Never use extreme heat to disassemble a hydraulic ram or cylinder . Metal fatigue can lead to unsafe conditions. • Be aware of possible "pinch points" of the jack, and stay clear to avoid personal injury .
TJ10 User Manual ► 7 T OOL STICKERS AND T AGS CRUSH HAZARD - P/N 31064 STICKER LOCA TIONS W ARNING DECAL - P/N 28788 (Shown smaller than actual size) Indicates that users should read the manual before using the product.
8 ► TJ10 User Manual MAINTENANCE & CARE GENERAL PROTECTION Store the T rack Jack in an upright position, in a place where it is protected from the elements, abrasive dust, and damage. Use only recommended repair and replacement parts and materials specied in the Parts List section of this manual.
TJ10 User Manual ► 9 MAINTENANCE & CARE 7. It may be necessary to bleed air out of the cylinder . See instructions below for purging air . 8. Inspect the jack for leaks, cracks, or other damage. PURGING AIR Air trapped within the jack hydraulic system can be removed by performing the following steps.
10 ► TJ10 User Manual PREOPERA TION PROCEDURES Before putting a new T rack Jack into initial service, or after an extended period of being unused, perform a visual inspection for bent, broken, cracked, missing or worn components. Ensure the hydraulic uid and lubricant level is correct.
TJ10 User Manual ► 1 1 TROUBLESHOOTING PUMPING HANDLE A pumping handle is included with the T rack Jack is de - signed with a 4:1 safety factor . DO NOT use the pump - ing handle for any other purpose. DO NOT substitute other material for use as a pumping handle.
12 ► TJ10 User Manual SPECIFICA TIONS Performance MaximumLift ........................................................................................................................ 8.9 in. /226 mm MaximumLoad ................................
TJ10 User Manual ► 13 BASE ILLUSTRA TION.
14 ► TJ10 User Manual PUMP ASSY ILLUSTRA TION NOTE: Item descriptions which are preceded by a item number may be ordered individually. NOTE: Item descriptions which are preceded by a symbol are only available in their respective repair kits. Manifold Assembly P/N-34873 Includes all items shown except pump handle 34870.
TJ10 User Manual ► 15 ITEM P/N QTY DESCRIPTION 1 52805 1 Cap 3 52806 1 Lifting T oe 6 52807 1 Stop Ring 1 1 52809 1 Plunger 14 52812 1 Base, (Model TJ101 1 1M) 16 52813 1 Pumping Handle 28 01219 2 P.
16 ► TJ10 User Manual REP AIR KITS.
TJ10 User Manual ► 17 NOTES.
T o ll out a Product W arranty Recording form and for information on your warranty visit Stanleyhydraulic.com and select the W arranty tab. (Note: the warranty recording form must be submitted to validate the warranty). Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, OR 97267-5698 USA Phone: (503) 659-5660 Fax:(503)652-1780 www .
An important point after buying a device Stanley Black & Decker TJ10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanley Black & Decker TJ10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanley Black & Decker TJ10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanley Black & Decker TJ10 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanley Black & Decker TJ10 will certainly help you make a decision on the purchase.
If you already are a holder of Stanley Black & Decker TJ10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanley Black & Decker TJ10.
However, one of the most important roles played by the user manual is to help in solving problems with Stanley Black & Decker TJ10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanley Black & Decker TJ10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
