Instruction/ maintenance manual of the product IW16 Stanley Black & Decker
Go to page of 22
© 2014 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 66174 8/2014 V er 14 USER MANUAL Safety , Operation and Maintenance IW16 HYDRAULIC IMP ACT WRENCH.
2 ► IW16 User Manual DECLARATION OF CONFORMITY ÜBEREINSTIMM UNGS - ERKLARUNG DECLARATION DE CONF ORMITE CE E DECLARACION DE CONFO RMIDAD DICHIARAZIONE DI CONFORMITA Hydraulic Tools _______ ________.
IW16 User Manual ◄ 3 DECLARA TION OF CONFORMITY .......................................................................................................................... 2 SAFETY SYMBOLS .............................................................
4 ► IW16 User Manual Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel.
IW16 User Manual ◄ 5 T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safe- ty . Review them carefully before operating the tool and before performing general maintenance or repairs.
6 ► IW16 User Manual The safety tag (P/N 15875) at right is attached to the tool when shipped from the factory . Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use.
IW16 User Manual ◄ 7 The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools.
8 ► IW16 User Manual Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bu.
IW16 User Manual ◄ 9 Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity to limit max.
10 ► IW16 User Manual F ACTORS THA T AFFECT TORQUE An impact wrench is a rotary hammer that impacts the head of a bolt or nut. It does not apply a slow steady torque as a standard torque wrench. Therefore, sever- al factors affect the result of torque when using impact wrenches: 1.
IW16 User Manual ◄ 1 1 3. WARNING Always use sockets and accessories designed for impact type applications. DO NOT USE ST ANDARD SOCKETS OR ACCESSORIES. THESE CAN CRACK OR FRACTURE DURING OPERA TION. Select the direction of impact desired using the re- versing valve located on the side of the wrench.
12 ► IW16 User Manual • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the “OFF” position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system.
IW16 User Manual ◄ 13 If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem. When diagnosing faults in operation of the wrench, always check that the hydraulic power source is supplying the correct hydraulic ow and pressure to the tool as listed in the following table.
14 ► IW16 User Manual Drive Size .................................................................................................................................... 1-inch Square Drive Weight ........................................................
IW16 User Manual ◄ 15 Description Part Number Adapter , 1-inch to 3/4-inch Drive ....................................................................................................................... 31201 Extension, 10 inch, 1-inch Drive .........
16 ► IW16 User Manual 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 4 10 21 56 57 58 58 .
IW16 User Manual ◄ 17 ITEM NO. P A RT NO. QTY DESCRIPTION 1 00016 1 O-RING* 2 00026 1 O-RING* 3 00231 4 LOCKW ASHER 5/16" I.D. 4 00255 2 O-RING* 5 00580 1 SETSCREW 1/4-20 X 1/4 6 00663 1 RET AINING RING 7 00697 8 LOCKW ASHER 1/2" I.
18 ► IW16 User Manual Beginning at serial number 031513001, the valve handle assembly has changed. The prior style (part # 17279) used a steel spool sleeve installed in the valve handle assembly . The new style valve handle assem- bly (part # 73167) does not use a spool sleeve.
IW16 User Manual ◄ 19 IW16 UPRIGHT HANDLE KIT P/N-72768 MAKE SURE HOSES ARE INST ALLED INTO REAR-F ACING PORTS TORQUE BOTH 5/8-1 1 BOL TS TO 90ft-lbs ITEM (3) “DIRECTION STICKER” GOES ON THIS SIDE OF HANDLE SAME AS ON THE TOOL ROD ADJUSTMENT NUT IS LOCA TED IN THIS AREA OF THE UPRIGHT HANDLE (NOT VISIBLE).
20 ► IW16 User Manual For underwater hydraulic tools the applications are broken down into four quadrants depending on type of tool and method of operation. The types of tools are percussive and rotational, each with different characteristics allowing for dif- ferent depth operation.
IW16 User Manual ◄ 21 NOTES.
Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulics.com.
An important point after buying a device Stanley Black & Decker IW16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanley Black & Decker IW16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanley Black & Decker IW16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanley Black & Decker IW16 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanley Black & Decker IW16 will certainly help you make a decision on the purchase.
If you already are a holder of Stanley Black & Decker IW16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanley Black & Decker IW16.
However, one of the most important roles played by the user manual is to help in solving problems with Stanley Black & Decker IW16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanley Black & Decker IW16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center