Instruction/ maintenance manual of the product HX600S Standard Horizon
Go to page of 56
HX600S VHF/FM Marine Handheld T ransceiver Owner's Manual.
HX600S T ABLE OF CONTENTS RF EXPOSURE SAFETY ST A TEMENT ........................................................................................ 2 FCC AND CANADA RADIO LICENSE INFORMA TION .............................................................
HX600S Page 1 Congratulations on your purchase of the HX600S ! Whether this is your first portable marine VHF transceiver , or if you have other ST ANDARD HORIZON equipment, the ST ANDARD HORIZON orga.
HX600S Page 2 RF EXPOSURE SAFETY ST A TEMENT SAFETY INFORMA TION Y our wireless handheld portable transceiver contains a low power trans- mitter . When the Push-to-T alk (PTT) button is pushed, the transceiver sends out radio frequency (RF) signals.
HX600S Page 3 FCC AND CANADA RADIO LICENSE INFORMA TION S tandard Horizon radios comply with the Federal Communication Commis- sion (FCC) and Industry-Canada requirements that regulate the Maritime Radio Service. MARITIME ST A TION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.
HX600S Page 4 FCC NOTICE Unauthorized changes or modifications to this equipment may void compli- ance with FCC Rules. Any change or modification must be approved in writ- ing by ST ANDARD HORIZON, a Marine Division of VERTEX ST ANDARD.
HX600S Page 5 1. GENERAL INFORMA TION 1.1 INTRODUCTION The HX600S is a SUBMERSIBLE miniature 5-Watt port able two-way marine transceiver . The transceiver has all allocated USA, International, or Cana- dian channels. It has emergency channel 16 which can be immediately se- lected from any channel by pressing the [ 16/9 ] key .
HX600S Page 6 2. ACCESSORIES 2.1 P ACKING LIST When the package cont aining the transceiver is first opened, please check it for the following contents: • HX600S T ransceiver • CA T460 Antenna • FNB-83 7.
HX600S Page 7 3. ABOUT THIS RADIO 3.1 ABOUT THE VHF MARINE BAND W ARNING: The radio frequencies used in the VHF marine band lie between 156 and 158 MHz with NOAA Weather stations available between 161 and 163 MHz.
HX600S Page 8 AIR ( Aircraft ) BAND FREQUENCY CHART Frequency Range Communications Usage 108.000 - 1 17.975 MHz Navigational Aids 1 18.000 - 121.400 MHz Control T owers 121.500 MHz Int’l Distress Frequency 121.600 - 122.900 MHz Ground & Apron Control 122.
HX600S Page 9 4. GETTING ST ARTED If the radio has never been used, or its charge is depleted, it may be charged by connecting the CD-33 Charger Cradle with the NC-88 battery charger , as shown in the illustration.
HX600S Page 10 Battery Maintenance For safe and proper battery use, please observe the following: • Battery packs should be charged only in non-hazardous environments; • Use only ST ANDARD HORIZON-approved batteries; • Use only a ST ANDARD HORIZON, (a Marine Division of VERTEX ST AN- DARD) approved charger .
HX600S Page 11 4.1.2 BA TTER Y CHARGING If the radio has never been used, or its charge is depleted, it may be charged by connecting the CD-33 Charger Cradle with the NC-88 battery charger , as shown in the illustration.
HX600S Page 12 4.1.4 USING THE CD-33 CHARGER CRADLE 1. T urn the transceiver off. 2. Insert the DC plug from the NC-88 into the DC jack on the CD-33 side panel, then plug the NC-88 into the AC line outlet. 3. Insert the HX600S (with the battery pack) into the CD-33 ; the antenna should be at the left side when viewing the charger from the front.
HX600S Page 13 4.2 CONNECTING A GPS T O THE CD-33 The CD-33 is supplied with a cable that is designed to be connected to any GPS that has an NMEA Output with the GLL, GGA, GNS, or RMC sen- tences. Check with the owner ’s manual of the GPS to confirm this informa- tion.
HX600S Page 14 5. CONTROLS AND SWITCHES NOTE This section defines each control of the transceiver . For detailed operat- ing instructions, refer to section 6 “ BASIC OPERA TION .” Refer to illus- trations for the location of the following controls, switches, and connec- tions.
HX600S Page 15 VOLUME CONTROL T urn this control clockwise to increase the volume. MIC/SP JACK The jack accepts the optional CMP460 S peaker/Microphone, MH-57 A4B Mini S peaker/Microphone, VC-24 VOX Headset or VC-27 Earpiece/Mi- crophone. When this jack is used, the internal speaker is disabled.
HX600S Page 16 [ 16/9 ] KEY Immediately recalls channel 16 from any marine channel or band loca- tion. Holding down this key recalls channel 9. [ WX ] KEY Immediately recalls the last-used NOAA Weather Channel from any chan- nel location. Recalls the previously- selected working channel when the [ WX ] key is pressed again.
HX600S Page 17 [ MEM ] KEY Press this key to memorize the selected channel for scanning. When pressed a “MEM” icon will be shown on the LCD display indicating the channel has been saved to scan memory . The scan memory is only used with the Marine and WX channels.
HX600S Page 18 6. BASIC OPERA TION 6.1 INITIAL SETUP 1. Install the battery pack on the transceiver (see section 4.1.3 “BA TTER Y INST ALLA TION/REMOV AL” ).
HX600S Page 19 [ H/L ] key for about one second. This locks the [ S ] and [ T ] keys and all the front panel controls except the [ H/L ], PTT and SQL keys. The “ ” symbol will appear on the display to indicate that the keypad is locked. Hold down the [ H/L ] key for about one second to unlock the keys.
HX600S Page 20 6.4 NOAA WEA THER CHANNELS 1. T o receive a NOAA weather broadcast, press the [ WX ] key . The transceiver changes to the weather channel mode. This mode consists of a special preset memory bank containing the NOAA weather channels. 2. The transceiver will be set to the last used NOAA weather channel.
HX600S Page 21 6.4.2 SPECIFIC AREA MESSAGE ENCODING (SAME) In addition to the NOAA Weather Alert, the HX600S is able to receive and display NOAA Weather Radio (NWR) SAME Messages.
HX600S Page 22 Nature of Activation NWR-SAME Code Level Administrative Message ADR A0 Avalanche W atch A V A A2 Avalanche W arning A VW A1 Blizzard Warning BZW A1 Child Abduction Emergency CAE A5 Civi.
HX600S Page 23 6.5 PRESET CHANNELS (0 ~ 9): INST ANT ACCESS The HX600S provides ten Preset channel for each individual operating band (VHF Marine, AM Broadcast, FM Broadcast and Air Band). Programming 1. Select the desired band by pressing the [ BAND ] key .
HX600S Page 24 7. ADV ANCED OPERA TION ON THE MARINE BAND 7.1 USA, CANADIAN, AND INTERNA TIONAL CHANNELS 1. T o change from US to Canadian or International Marine Channels, hold down the [ 16/9 ] key and press the [ WX ] key . The band will change from USA, to International, and to Canadian with each press.
HX600S Page 25 7.3 PROGRAMMABLE PRIORITY SCAN The priority scanning feature allows the radio to scan while also keeping watch on a particularly important “priority channel.” The following channels can be set as the priority channel: 16, 09, and MARINE Preset Channel.
HX600S Page 26 7.4 DUAL W A TCH The Dual W atch feature allows the radio to watch for a transmission on the priority channel and another selected Marine channel until a signal is re- ceived. The priority channel is determined in section 7.3 “PROGRAMMABLE PRIORITY SCAN” .
HX600S Page 27 7.7 CHANNEL 9 Channel 9 is used as a hailing channel for initial, non-emergency contacts with other vessels. Hold down the [ 16/9 ] key for 1 second to select channel 9. Y ou should change to a working channel, after contact is est ablished (so as to keep the hailing channel clear for other users).
HX600S Page 28 7.10 DIGIT AL SELECTIVE CALLING 7.10.1 GENERAL 7.10.1.1 Digital Selective Calling (DSC) Digital Selective Calling is a semi-automated method of est ablishing a radio call; it has been designated by the International Maritime Organization (IMO) as an international standard for establishing VHF , MF and HF radio calls.
HX600S Page 29 7.10.2 SENDING A DISTRESS CALL The distress call automatically includes the vessel’s DSC MMSI and Lat/Lon position. The vessel’ s position will only be transmitted if the transceiver is properly connected to an operating GPS receiver with NMEA output.
HX600S Page 30 8. SCRAMABLER OPERA TION 8.1 VOICE SCRAMBLER UNIT The optional FVP-31 V oice Scrambler Unit permits secure voice communi- cations with stations within your network, which prevents others from listen- ing using normal communication equipment.
HX600S Page 31 9. End the message by saying “ OVER ”. Release the microphone button and listen. 10. If there is no answer , repeat the above procedure. If there is still no re- sponse, try another channel. 9.2 CALLING ANOTHER VESSEL (CHANNEL 16 OR 9) Channel 16 may be used for initial contact (hailing) with another vessel.
HX600S Page 32 9.3 OPERA TING ON CHANNELS 13 AND 67 Channel 13 is used at docks and bridges and by vessels maneuvering in port. Messages on this channel must concern navigation only , such as meet- ing and passing in restricted waters. Channel 67 is used for navigational traffic between vessels.
HX600S Page 33 10. MENU ( “SET” ) MODE The Menu Mode allows a number of the HX600S operating parameters to be customized. 1. T urn the transceiver off. 2. Hold down the SQL switch, then turn on the transceiver while still holding down the SQL switch.
HX600S Page 34 to 12 characters). 9. After completing your adjustment, press the SQL switch to save the new setting. 10. Press the PTT key to exit to normal operation. dUL dUL dUL dUL dUL (DW DISPLA Y) Function : Selects the Dual W atch scanning display mode.
HX600S Page 35 dt dt dt dt dt (DUAL W A TCH MODE) Function : Selects dual or tri-watch as desired. A vailable V alues : d- (Dual W atch) / t- (T ri Watch) Default : d- dr dr dr dr dr (DIMMER) Function : Setting of the Display brightness level.
HX600S Page 36 1. Visit http://www .nws.noaa.gov/nwr/indexnw .htm and choose the SAME code in the state and county of the coverage area. Example : COUNTY/CITY/AREA SAME # NWR TRANSMITTER FREQ. CALL SIGN W A TTS REMARKS Los Angeles 006037 Los Angeles, CA 162.
HX600S Page 37 1 1. INST ALLA TIONS OF OPTION 1 1.1 FVP-31 VOICE SCRAMBLER UNIT 1. Make sure that the transceiver is off.Remove the battery pack. 2. Locate the connector for the optional unit under the caution seal in the battery compartment on the back of the transceiver; just peel off the cau- tion seal.
HX600S Page 38 12. MAINTENANCE 12.1 GENERAL The inherent quality of the solid-state components in S T ANDARD HORIZON radios will provide many years of continuous use.
HX600S Page 39 12.3 TROUBLESHOOTING CHART TROUBLESHOOTING CHART SYMPTOM The [ SCAN ] key does not start the scan. The USA/INTL/CAN modes do not function. Press and holding the SQL switch does not eliminate background noise. Cannot change any function.
HX600S Page 40 13. VHF MARINE CHANNEL ASSIGNMENTS T ables on the following pages list the VHF Marine Channel assignments for U.S.A. and International use. Below are listed some data about the charts. 1. VTS. Where indicated, these channels are part of the U.
HX600S Page 41 the term “non-commercial” in the Channel Use column of the chart. Some of these are shared with other users and some are used only in certain geographic regions. 6. Marine vessels equipped with VHF radios are required to monitor Channel 16 .
HX600S Page 42 VHF MARINE CHANNEL CHART CH U C I S/D TX RX CHANNEL USE 23 X X D 157.150 161.750 Public Correspondence ( Marine Operator ) 23A X S 157.150 U.S. Government Only 24 X X X D 157.200 161.800 Public Correspondence ( Marine Operator ) 25 X X X D 157.
HX600S Page 43 VHF MARINE CHANNEL CHART CH U C I S/D TX RX CHANNEL USE 79 X D 156.975 161.575 Port operation and Ship movement 79A X X S 156.975 Commercial 80 X D 157.025 161.625 Port operation, ship movement 80A X X S 157.025 Commercial 81 X D 157.075 161.
HX600S Page 44 1: 156.050 MHz and 156.175 MHz are available for port operations and commercial communications purposes when used only within the U.S. Coast Guard designated V essel Traffic Services (V.
HX600S Page 45 4: Use of 156.875 MHz is limited to communications with pilots regarding the movement and docking of ships. Normal output power must not exceed 1 watt. 5: 156.375 MHz and 156.650 MHz are available primarily for intership navigational communications.
HX600S Page 46 14. W ARRANTY Marine Products Limited W arranty ST ANDARD HORIZON (a division of VERTEX ST ANDARD) warrants, to the original purchaser only , each new Marine Communications Product (“.
HX600S Page 47 ST ANDARD HORIZON will not warrant installation, maintenance or service of the Products. In all instances, ST ANDARD HORIZON’s liability for damages shall not exceed the purchase price of the defective Product.
HX600S Page 48 PRODUCT W ARRANTY REGISTRA TION THANK YOU for buying ST ANDARD HORIZON (a division of V ertex S tandard) products! Please visit www .standardhorizon.
HX600S Page 49 15. SPECIFICA TIONS Performance specifications are nominal, unless otherwise indicated, and are subject to change without notice. 15.1 GENERAL Frequency Ranges (MHz): 156 MHz - 163.
HX600S Page 50 15.3 RECEIVER Circuit T yp e : Double-Conversion Superheterodyne (NFM, AM) T riple-Conversion Superheterodyne (WFM) Intermediate Frequencies : NFM, AM WFM 1st: 47.25 MHz 45.8 MHz 2nd: 450 kHz 10.7 MHz 3rd: – 1 MHz Sensitivity : 0.2 µV for 12 dB SINAD (Marine Band) 0.
HX600S Page 51 NOTE.
HX600S Page 52 NOTE.
This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference. Part 15.21: Changes or modifications to this device not expressly ap- proved by V ertex S tandard could void the User ’s authorization to oper- ate this device.
Copyright 2006 VERTEX ST ANDARD CO., L TD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX ST ANDARD CO., L TD. Marine Division of VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.
An important point after buying a device Standard Horizon HX600S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Standard Horizon HX600S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Standard Horizon HX600S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Standard Horizon HX600S you will learn all the available features of the product, as well as information on its operation. The information that you get Standard Horizon HX600S will certainly help you make a decision on the purchase.
If you already are a holder of Standard Horizon HX600S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Standard Horizon HX600S.
However, one of the most important roles played by the user manual is to help in solving problems with Standard Horizon HX600S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Standard Horizon HX600S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
