Instruction/ maintenance manual of the product L Baracoda
Go to page of 48
RoadRunne rs Evolutio n Programmin g Guide © Baracoda TM – July 2009 RoadRunne rs Evolutio n –L (1D) & - LA (La ser) Programmin g Guide Data Capture for W ork force in Motion LA (La ser).
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 2 - Data Capture for W ork force in Motion SUMMARY SUMMARY ................................................................... 2 REVISION HISTORY .........................
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 3 - Data Capture for W ork force in Motion 2.8.6. S ET LENGTHS FOR C ODE 39 ....................................................... 30 2.8.7. I TALIAN P HARMA C ODE SETTINGS .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 4 - Data Capture for W ork force in Motion Revision History Changes to the original manual are listed below. Document Date Description 1.0 11 July 08 Initial release 1.1 26 Au g.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 5 - Data Capture for W ork force in Motion Introduction The RoadRunn ers Evolution sca nner can be progra mmed by scanning b arcode labels whic h contain command s for the decoder.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 6 - Data Capture for W ork force in Motion 1. General Configuration 1.1.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 7 - Data Capture for W ork force in Motion 1.2. Baracoda advanced features 1.2.1. Switch on delay In order to switch on the scann er in its standard mo de, you should just press the trigger.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 8 - Data Capture for W ork force in Motion 1.2.4. No data loss mode and Baracoda Header Baracod a header: It is a propr ietary data encap sulation. It is necessary to activate it to use the Baracoda keyb oard emulation (Kemul) and Ter minal.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 9 - Data Capture for W ork force in Motion In Autoscan mode , the scan beam i s continuously on.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 10 - Data Capture for W ork force in Motion 1.4. Operating Mode Real Time mode In real time mode, the bar code is decoded and trans mitted t o the remote host with out an y delay.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 11 - Data Capture for W ork force in Motion 1.4.1. Real Time mode Erases all cap tured data s tored in memory a nd force s t he scann er in Real ti me mode. No other s etting is changed.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 12 - Data Capture for W ork force in Motion 1.4.5. Batch mode BATCH MODE Forces the Road Runners Evo lution in Batch mode.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 13 - Data Capture for W ork force in Motion 1.5. The diffe rent connection m ethods There are two (2 ) different way to .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 14 - Data Capture for W ork force in Motion 1.6. Buzzer an d Led Settings You can use thes e options to enable o r disable the buz zer and / o r the Led.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 15 - Data Capture for W ork force in Motion 1.7. Bluetooth settings 1.7.1. Bluetooth name You can chan ge the scanner Bluetoo th name; name that you see during a sear ch of Bluetooth peripheral.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 16 - Data Capture for W ork force in Motion 1.7.2. Sniff period settings Change the Snif f period. If the h igher is the latency an d the smaller is the po wer consump tion.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 17 - Data Capture for W ork force in Motion 1.7.3. Security (code PIN) settings Some Bluetooth device will not a ccept connections with d evices that do not have a security code.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 18 - Data Capture for W ork force in Motion 1.8. Data form at The barcode string can be added a timestamp, prefix es and/or suffixes. The symbology p refix/suffix can b e added by BaracodaManager only.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 19 - Data Capture for W ork force in Motion Set Timestamp END of configuration Noted tha t the timestamp must fit th e s.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 20 - Data Capture for W ork force in Motion 1.8.2. Data Prefix/Suffix You can add a data prefix a nd/or suffix (strings of mor e than 32 characters will not be accepted) to every barcode sent to the host device.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 21 - Data Capture for W ork force in Motion Set Data prefix Set Data suffix End of configuration 1.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 22 - Data Capture for W ork force in Motion 1.8.4. AIM Symbology Identifier AIM Identifier will b e transmitted at the beginning of the barcode. More in formation abo ut the AIM Ident ifier is available in App endix2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 23 - Data Capture for W ork force in Motion 2. Decoder Parameters 2.1. Decoder defau lt settings Sets the defaults d ecoder settings for all t he symbologie s Set Decoder Default Sett ings 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 24 - Data Capture for W ork force in Motion Set barcode length END of config 2.4. Voting Standard voting set is two (2). This m eans that a ba rcode is considered r ead by the d ecoder if the same data is decoded twice.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 25 - Data Capture for W ork force in Motion 2.5. Min/Max l ength per symbolo gy The following i s a procedure t o follow for every b arcode symbology .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 26 - Data Capture for W ork force in Motion 2.5.1. Symbology table Header Selected Symbology SELECT ALL Code 93 Code 128 / EAN 128 Code 39 Codabar Interleaved 2 of 5 Standard 2 of 5 (industrial 2 of 5) Code 11 MSI Only the variable length s ymbologies appear.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 27 - Data Capture for W ork force in Motion 2.6.2. Codabar Start/Stop characters Not transmitted (*) Transmitted 2.6.3. Codabar Check Digit Verification (AIM recommendation) Not used (*) Checked and transmitted Checked but not transmi tted 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 28 - Data Capture for W ork force in Motion 2.7. Code 11 S ettings 2.7.1. Enable/Disable Code 11 To enable or disable Code 11, scan the appropriat e barcode below. Code 11 - not active (*) Code 11 - active 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 29 - Data Capture for W ork force in Motion 2.8. Code 39 s ettings 2.8.1. Enable/Disable Code 39 To enable or disable Code 39, scan the appropriat e barcode below. Enable (*) Disable 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 30 - Data Capture for W ork force in Motion 2.8.4. Accepted Code 39 characters Code 39 - start/stop - accepte d characte.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 31 - Data Capture for W ork force in Motion 2.8.7. Italian PharmaCode settings Italian PharmaCode is based on Code39 encoding sch eme, thus its setting s are Code39 settings.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 32 - Data Capture for W ork force in Motion 2.10. Code 128 Settings 2.10.1. Enable/Disable Code 128/EAN 128 To enable or disable Code 128/EAN 128, scan the app ropriate barcode below.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 33 - Data Capture for W ork force in Motion 2.10.3. EAN 128: Group Separator ‘FNC1’ included in an EAN128 co de is transmitted by default as ‘GS’ (Grou p Separator – 0x1D).
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 34 - Data Capture for W ork force in Motion 2.10.4. Enable/Disable AIM ID Transmission Even if the “AIM ID t ransmit” is d isabled, it is possibl e to enable the AIM ID transmission f or EAN128.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 35 - Data Capture for W ork force in Motion 2.11.3. Set lengths for Interleaved 2 of 5 Interleaved 2 of 5 - barcode length - minimum length = 6 (* ) Interleaved 2 of 5 – ba rcode length- any leng th 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 36 - Data Capture for W ork force in Motion 2.12.3. Set lengths for MSI MSI Code - barcode length - any length MSI Code - barcode length - minimum length = 6 (*) 2.13. Standard 2 of 5 Settings 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 37 - Data Capture for W ork force in Motion 2.13.3. Set lengths for Standard 2 of 5 Standard 2 of 5 - barcode l ength - any length Standard 2 of 5 - barcode l ength - minimum len gth = 6 (*) 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 38 - Data Capture for W ork force in Motion 2.14.2. Transmit EAN13 Check Digit UPC / EAN - check digit - UPC - A and EAN13 - transmit ted (*) UPC / EAN - check digi t - UPC-A/EAN 13 - not t ransmitted 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 39 - Data Capture for W ork force in Motion 2.14.6. Transmit UPC number system for UPC-E UPC / EAN - UPC number s ystem - UPC - E - transmitted (*) UPC / EAN - UPC number system - UPC-E - n ot transmitted 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 40 - Data Capture for W ork force in Motion 2.14.8. ISSN/ISBN settings UPC / EAN – ISSN/ISBN – Active (*) UPC / EAN .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 41 - Data Capture for W ork force in Motion 2.15. GS1 Data Bar (RSS) 14 Sett ings 2.15.1. Enable/Disable GS1 DataBar 14 GS1 DataBar 14 - active (*) GS1 DataBar 14 – not ac tive 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 42 - Data Capture for W ork force in Motion 2.16. GS1 Data Bar (RSS) Limited Settings 2.16.1. Enable/Disable GS1 DataBar Limited GS1 DataBar Limited - active (*) GS1 DataBar Limited – not active 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 43 - Data Capture for W ork force in Motion 3. APPENDIX 1: ASCII Table (A-Z, a-z, 0- 9, punctuation, Control characters).
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 44 - Data Capture for W ork force in Motion Small letters (a-z): Name Programming label Name Programming label a n b o c.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 45 - Data Capture for W ork force in Motion Ponctuation: Name Programmin g label Name Programming label Space < ! = " > # ? $ @ % [ & ] ' ^ ( _ ) { * | + } , ~ - : .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 46 - Data Capture for W ork force in Motion Decimal numbe rs (0-9): Name Programming label 0 1 2 3 4 5 6 7 8 9.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 47 - Data Capture for W ork force in Motion Control Chara cters: Name Programming label CR EOT ETX LF NUL SOH STX TAB.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guide v1.3 - 48 - Data Capture for W ork force in Motion 4. APPENDIX 2 – AIM symbology identifiers structure The SI prefix is a two.
An important point after buying a device Baracoda L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baracoda L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baracoda L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baracoda L you will learn all the available features of the product, as well as information on its operation. The information that you get Baracoda L will certainly help you make a decision on the purchase.
If you already are a holder of Baracoda L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baracoda L.
However, one of the most important roles played by the user manual is to help in solving problems with Baracoda L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baracoda L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
