Instruction/ maintenance manual of the product SR785 SRS Labs
Go to page of 14
SR785 T wo Channel Dynamic Signal Analyzer SRS STANFORD RESEARCH SYSTEMS.
SR785 T wo Channel Dynamic Signal Analyzer $11,950 (U.S. list) Features ● FFT , Correlation and Order T racking Measurements ● ANSI Standard 1/1, 1/3, 1/12 Octave Analysis ● Swept-Sine Mode (145.
F ast Responsive Mark er • Find Max/Min or track peaks • THD, THD + N • Band, sideband, harmonic power • Waterfall • Frequency and damping • Peak find • Absolute and relative • Statistics Input Channels • Dual ADCs provide 102.4 kHz bandwidth on both channels simultaneously.
SR785 T wo Channel Dynamic Signal Analyzer FFT Spectrum Analysis The SR785 Two Channel Dynamic Signal Analyzer is a precision, full-featured signal analyzer that offers state-of-the-art performance and a wide selection of features at a price that's less than half that of competitive analyzers.
View order maps or track individual orders with the SR785. Run-up and run-down measurements in both polar and bode formats are available. time record, 1000 averages take exactly 4 seconds, during which the SR785 still operates at its maximum display rate.
provided to monitor variations of RPM as a function of time. And a complete selection of time and RPM triggering modes is included allowing you to make virtually any rotating machinery measurement. Swept-Sine Measurements Network analysis using FFT mode produces fast results but suffers from limited dynamic range and frequency resolution.
Top display shows the burst noise source. Bottom display shows an arbitrary waveform downloaded to the SR785 via the IEEE-488 interface. Top display shows a histogram of time data.
Two 2k deep waterfall buffers ensure you’ll never miss important waterfall data. The SR785 doesn’t limit you to a few preselected measurements. With user math you can create an infinite variety of measurements. Wa t e r f a l l Waterfall plots are a convenient way of viewing a time history of your data.
Output The SR785's built-in 3.5" 1.44 MB disk drive, GPIB and RS-232 computer interfaces and Centronics printer port combine to allow almost unlimited flexibility in saving, printing, plotting or exporting your measurement data.
The SRS DataViewer Windows utility enables you to view SR785 data files graphically and save them in different formats. DataViewer The SRS DataViewer is a Windows 95 program that allows you to quickly upload SR785 files into a graphical environment, perform simple editing and cut and paste into other applications.
SR785 Specifications Specifications apply after 30 minutes of warm-up and within two hours of last auto-offset. All specifications are with 400 line FFT resolution and anti-alias filters enabled unless stated otherwise.
Flatness <0.25 dB pk-pk (typical), <1.0 dB pk-pk (max), 5000 rms averages Pink Noise Source Bandwidth DC to 102.4 kHz Flatness <2.0 dB pk-pk, 20 Hz - 20 kHz (measured using averaged 1/3 octave analysis) Chirp Source Time Record Continuous or Burst Output Sine sweep across the FFT span Flatness ±0.
SR785 Features Instrument Modes FFT, Time/Histogram, Correlation, Octave, Swept-Sine, Order Tracking Frequency Domain Measurements Frequency Response, Linear Spectrum, Cross Spectrum, Power Spectrum, .
1290 D Reamwood Avenue ¥ Sunnyvale, CA 94089 Telephone (408)744-9040 ¥ FAX: (408)744-9049 Email: info@srsys.com ¥ WWW: www.srsys.com Printed in USA ©1998 Stanford Research Systems, Inc. All specifications and prices subject to change (1/98) All trademarks are the property of their respective owners.
An important point after buying a device SRS Labs SR785 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SRS Labs SR785 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SRS Labs SR785 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SRS Labs SR785 you will learn all the available features of the product, as well as information on its operation. The information that you get SRS Labs SR785 will certainly help you make a decision on the purchase.
If you already are a holder of SRS Labs SR785, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SRS Labs SR785.
However, one of the most important roles played by the user manual is to help in solving problems with SRS Labs SR785. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SRS Labs SR785 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
