Instruction/ maintenance manual of the product 2604 Baracoda
Go to page of 9
The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by B aracoda under license. The Baracoda names and Baracoda trademarks are own by Baracoda. All specifi cation are subject to c hange without notice - Non contractual pictures © Baracoda - All rights reserved Baracoda, Inc.
2604 User Guide Table of contents 1 Introduction .............................................................................................................................. 2 2 Installing/replacing b atteries .......................................
2604 User Guide 1 Introduction The 2604 is easy to use. Simply press the trigger to scan a barcode. Th e colour of the LED indicates the status of the device. A beep indicates when the scanner connects to th e remote device and when a barcode is scanned successfully.
2604 User Guide 3 Proper scanning position Position the scanner so the light be am fully overlaps and crosses the bar code. The scanner will emit a beep when the scan is su ccessful.
2604 User Guide 5 LED and Beep signals Summary The LED color indicates the operating mode: Red Full memory or empty batter y Orange Batch mode Green Real-time mode LED Blinking indicates RF status Single Blinks (e.g. *pause*pause*…) T he scanner is ready to be connected Double Blinks (e.
2604 User Guide 6 Configuring your scanner There are two ways to configure your sc anner: When connected to host device, you can use the Ba racodaManager for multiple settings (refer to BaracodaManager documentation). Or, you can use con fig uration barcodes (refer to the programming guide).
2604 User Guide 6.3 Symbology You can enable/disable ty pe of barcode decoders with both the Barac odaManager and the programming guide. 6.4 Data format 6.4.1 Acknowledgment: You are given an acknowledgment if the scan is succes sful. You can configure or disable the scanner acknowle dgement through BaracodaManager.
2604 User Guide 7 Other functions 7.1 Power management You can configure your scanner to work at 20 dBm (default setting) or 10 dBm through Barac odaManager. Due to local law, you may not use 20 dBm in some c ountries (like Italy). Please refer to your local la w before using your scanner.
2604 User Guide 8 Safety/Regulatory. Emissions: FCC Class A EN60950 & EN60825-1 V C C 1 - B Electronical: UL, TUV Changes or modifications not expressly approved by the party re sponsible for compliance could v oid the user's authority to operate the equipmen t.
An important point after buying a device Baracoda 2604 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baracoda 2604 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baracoda 2604 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baracoda 2604 you will learn all the available features of the product, as well as information on its operation. The information that you get Baracoda 2604 will certainly help you make a decision on the purchase.
If you already are a holder of Baracoda 2604, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baracoda 2604.
However, one of the most important roles played by the user manual is to help in solving problems with Baracoda 2604. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baracoda 2604 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
