Instruction/ maintenance manual of the product BT49QT-12 Tanco Baotian
Go to page of 26
BT49QT -12 T anco – User Manual, Service Schedule & History.
Introduction Welco me to you r new BAO TIAN BT 49Q T -12 (T anc o) , wh ich ha s been dev elo ped by BA OTI AN MOTORCYCLE INDUSTRIAL CO. L TD. We hope you enjoy your new Baotian BT49QT -12 (T anco).
CONTENTS Guidance............................................................................................................................................................1 Position of parts ..........................................................
1 1. Pre-riding inspection Please read the details in the relevant chapter for your safety . 2. Helmet Do wear a helmet at all times while riding the motorcycle. 3. Being familiar with motorcycle operation It is of great importance to ensure your safety at all times, especially whilst becoming familiar with your motorcycle .
5. Positions of the numbers When your motorcycle needs to be inspected, repaired or undertake any service, these numbers will assist your Baotian Dealer when servicing your motorcycle. Please note down your numbers here: The frame number: ............
3 1 Front signal light 2 Left front turning light 3 Head light 4 Rear brake lever 5 Rear-view mirrors 6 Left switches 7 Seat lock 8 Left rear turning light 9 Starting pedal 10 Muffler 1 1 Right rear t.
1. Rear brake lever Hold it tight and the rear brake works 2. Switches on the left handle A. Horn button B. T urning signal switch Left turning light right turning light C. Switch for high/low beam lights 3. Meters and indicating lights A. Indicates the speed in Km/h and Mph B.
4. Front brake lever Press it tightly and the front brake works. 5. Switches on the right A. Head light switch B. Electric starting button C. Off switch When the ignition switch is at ON position, hold the brake and press the electric starting button and then the engine starts.
15w/40-15w/50 10w/40 10w/30 -10 0 10 20 30 40 C 20 40 60 80 100 F T 20w/40-20w/50 Fuel tank Usage of the fuel tank lock: 1. T urn the little cap on the fuel cap clockwise. Insert the key and turn the key clockwise and take out the fuel cap. 2. Align the lock tongue on fuel cap with the notch on fuel tank, press the fuel cap and lock it.
Pre-riding inspection Please check the following parts before you drive. 7 No. Items Inspection content 1 Steering handle bar 1.Flexibility . 2. No gap or loose appearance 2 Brake system 1.T ravel of the front brake and the rear brake. 2. No damage to the cable 2.
Engine starting 1. Please check the volume of engine oil and fuel before starting. The main stand should be stood up while starting the engine. 2. T urn the ignition switch to the “ON” position. 3. Engine Starting Grip the brake lever and press the starter button and then the engine will start.
4. Kick Starting Grip the brake lever , kick the kick start pedal downwards 2 or 3 times in rapid succession. 9 W arning: ◆ After the engine has started, the kick start pedal should be taken back to its original position. Otherwise, it will affect the driver’s safety .
1. Battery • 12V/4Ah battery • When the voltage is less than 1 1.5V , please use kicking start in stead of electric starting. • Place the ignition switch to OFF position before battery replacement. • Electrode identification: “+”-red line, “-“-black line.
4. Spark plug • Clean the carbon deposit on the spark plug with a piece of hard wire or steel needle. • Adjust the gap to 0.6-0.7mm with a feeler gauge. • Use A7RC when replacement is needed. 5. Fuel Always refill with unleaded petrol. T ry to refill before the needle reaches the red zone of the gauge.
7. Brake system Normal free travel of the brake lever is about 2-5mm. 1. The front brake (disk brake) 2. The rear brake (drum brake) T urn the adjusting nut to get a proper travel. Normal free travel of the brake lever is about 10-20mm. _ 12 Disk brake ◆ ◆ Grip the brake lever and check the wear and tear indicator .
Brake fluid level • It has been filled with the special brake fluid before the motorcycle leaves the factory . Fluid should only ever be replace or filled with DOT4 brake fluid. Never replace or mix other fluids, otherwise it will damage the brake system.
9. Starter motor Check the fastening bolts and the contact brushes, and replace them if necessary . 10. Fuse An inline fuse is located in the live wire from the battery .
T echnical Parameters 15 Size Length 1850mm Width 680mm Height 1 150mm Wheel base 1300mm Weight Unloaded weight 88kg Mass weight 242kg Capacity Max. Speed 45km/h Slope ≥6º Circuit system Spark plug A7RC Battery 12V / 5.
Engine Model 139QMA T ype 4 stroke Cylinder 1 Bore and stroke 39 x 41.4mm Cylinder volume 49ml Compression ratio 10.5:1 Max. power 2.61 kW / 8000 (r/min) Max.
17.
Baotian W arranty In the event of a sudden mechanical or electrical failure please contact your supplying dealer . Y our 24-month warranty covers your scooter/motorcycle in the event of mechanical breakdown or component failure. The first 12 months of cover extends to the entire scooter with the exceptions detailed below .
19 INITIAL INSPECTION Mileage: Date: Dealer stamp: SER VICE 2 Mileage: Date: Dealer stamp: SER VICE 1 Mileage: Date: Dealer stamp: SER VICE 3 Mileage: Date: Dealer stamp:.
20 SER VICE 4 Mileage: Date: Dealer stamp: SER VICE 6 Mileage: Date: Dealer stamp: SER VICE 5 Mileage: Date: Dealer stamp: SER VICE 7 Mileage: Date: Dealer stamp:.
21 SER VICE 8 Mileage: Date: Dealer stamp: SER VICE 10 Mileage: Date: Dealer stamp: SER VICE 9 Mileage: Date: Dealer stamp: SER VICE 11 Mileage: Date: Dealer stamp:.
22 SER VICE 12 Mileage: Date: Dealer stamp: SER VICE 14 Mileage: Date: Dealer stamp: SER VICE 13 Mileage: Date: Dealer stamp: SER VICE 15 Mileage: Date: Dealer stamp:.
23 Maintenance Sc hedule PDI 300 KM 1,000 KM 3,000 KM 6,000 KM 9,000 KM 12,000 KM Every 2 Y ears Engine Oil Replace Replace Replace Replace Replace Replace Gear Oil Replace Replace Replace Oil Straine.
An important point after buying a device Baotian BT49QT-12 Tanco (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baotian BT49QT-12 Tanco yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baotian BT49QT-12 Tanco - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baotian BT49QT-12 Tanco you will learn all the available features of the product, as well as information on its operation. The information that you get Baotian BT49QT-12 Tanco will certainly help you make a decision on the purchase.
If you already are a holder of Baotian BT49QT-12 Tanco, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baotian BT49QT-12 Tanco.
However, one of the most important roles played by the user manual is to help in solving problems with Baotian BT49QT-12 Tanco. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baotian BT49QT-12 Tanco along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
