Instruction/ maintenance manual of the product 110 Spirit
Go to page of 2
9. P(Pause) button Spirit 110 U n p a c k i n g y o u r p h one Corded Telephone 1. Where to find it 2. Installation 1 . Locating the Base unit The Base unit should be placed on a level surface, in a position where: the telephone line cable will reach your telephone line socket or extension socket.
9. P(Pause) button Storing a 1 Number in 2 M1,M2,M3 one-touch Dial out Stored Ö Lift up Handset, press M1,M2,M3 buttons. number 3 2 3 3 2 Press MEM and then the 0-9 button to Replace the Handset on the Base unit cradle. memories Storing a Number in (0-9) two-touch memor ies 1 2 3 selected memory.
An important point after buying a device Spirit 110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spirit 110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spirit 110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spirit 110 you will learn all the available features of the product, as well as information on its operation. The information that you get Spirit 110 will certainly help you make a decision on the purchase.
If you already are a holder of Spirit 110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spirit 110.
However, one of the most important roles played by the user manual is to help in solving problems with Spirit 110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spirit 110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
