Instruction/ maintenance manual of the product SR5 Loudspeaker Spendor
Go to page of 9
SR5IM1.DOC Page 1 of 9 Instruction Manual SR5 Loudspeaker Spendor Audio Systems Ltd.
SR5IM1.DOC Page 2 of 9 IMPORTANT • PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING YOUR NEW SPENDOR LOUDSPEAKERS • DO NOT DRILL ANY HOLES OR FIX ANY SCREWS CLOSE TO AN Y AC MAINS OR OTH.
SR5IM1.DOC Page 3 of 9 1 POSITIONIN G THE LOUDSPEAKERS • The SR5 frequency response is extremely well maintained off - axis. This creates a wide deep precise sound field which allows great flexibility when planning the layout of your room, seating, loudspeakers, and associated equipment (e.
SR5IM1.DOC Page 4 of 9 • The wall bracket allows you to adjust the angle of the cabinet to fine - tune the sound field which is especially useful when the SR5 is used as a surround or rear channel loudspeaker or if it is mounted on a ceiling. See figure 4.
SR5IM1.DOC Page 5 of 9 2 BRACKET AND CABINET INSTALLATION • Check that all loudspeaker cables have been prepared and installed. See section 3 Cables and Connections. • The cabinet is secured to the bracket with 2 x M6 hex - drive socket cap machine screws, 2 x spring washers and 2 x stainless steel bushes.
SR5IM1.DOC Page 6 of 9 3 CABLES AND CONNECTIONS • Loudspeaker cables can have a noticeable effect on sound quality. Choose good quality low resistance cables with high purity metal conductors and low - loss dielectric (insulation). Ask your dealer for advice on cables to suit your system and budget.
SR5IM1.DOC Page 7 of 9 BI - AMPING • IMPORTANT : REMOVE the terminal links and store them safely. • Bi - amping allows two independent audio power amplifier of equal or similar quality to be used for LF and HF signals.
SR5IM1.DOC Page 8 of 9 7 QUERIES AND SERVIC E If you require advice or service for your audio system please contact your Spendor dealer. We recommend that you retain all the packaging for your loudspeakers in case you need to transport them safely in the future.
SR5IM1.DOC Page 9 of 9 9 SPECIFICATIONS [SR5] Description 2 - way sealed enclosure for use on wall Drive Units 25mm (1in) coated fabric dome tweeter 140mm (5.
An important point after buying a device Spendor SR5 Loudspeaker (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spendor SR5 Loudspeaker yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spendor SR5 Loudspeaker - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spendor SR5 Loudspeaker you will learn all the available features of the product, as well as information on its operation. The information that you get Spendor SR5 Loudspeaker will certainly help you make a decision on the purchase.
If you already are a holder of Spendor SR5 Loudspeaker, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spendor SR5 Loudspeaker.
However, one of the most important roles played by the user manual is to help in solving problems with Spendor SR5 Loudspeaker. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spendor SR5 Loudspeaker along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center