Instruction/ maintenance manual of the product LL300N-8 Spectra
Go to page of 9
LL300 © 2004, T rimble Navigation Limited. All rights reserved PN Q102874 041365_Umschlag_LL300.qxd 21.12.2004 12:40 Uhr Seite 1.
LL300 LL300 ON OFF HI/ MA N 9 11 8 13 14 6 12 14 14 7 HI/ MAN ON OFF LL300 6 2 5 4 3 1 Printed in Germany Q102874 10 041365_Umschlag_LL300.qxd 21.12.2004 12:40 Uhr Seite 2.
5 • Do not remove warning labels from the unit. • The laser is subject to class 3R (< 5mW , 600 ... 680 nm). • Due to the small diameter beam, watch and secure the course of the beam in remote areas. • Never look into the laser beam or direct it to the eyes of other people.
6 COMPONENTS Buttons 1 Power Button 2 Manual Button Control indicators 3 Leveling Indicator 4 Manual/HI-W arning Indicator 5 Battery Indicator Elements of the unit 6 Infrared Receiver (for remote cont.
7 Charging the batteries The charger requires approx. 10 hours to charge empty rechargeable batteries. For this charging, connect the plug of the charger to the recharge jack of the unit. New or long-time out-of-use rechargeable batteries reach their best performance after being charged and recharged fi ve times.
8 OPERA TING EXAMPLES Determining the Height of Instrument (HI) The height of instrument (HI) is the elevation of the laser ’ s beam. The HI is determined by adding the grade-rod reading to a benchmark or known elevation. Set up the laser and place the grade rod on a job-site benchmark (BM) or known elevation.
9 In order to avoid offset errors, the receiver should be used close to the elevation where the laser has been set up. If a remote control is available, the up and down arrow buttons can be used for fi ne adjustments.
10 If the unit is within its working accuracy limits (± 20”) the maximum difference from true level at 20 m (65 ft.) + 20 m (65 ft.) = 40 m (130 ft.) is 4 mm (3/16 inch). Repeat the above steps for “minus X” and for “plus-” and “minus Y”, so that a measurement for all four axes of the unit have been performed.
11 SPECIFICA TIONS Leveling Accuracy 1, 3 : < ± 18 arc seconds, < ± 2.6 mm/30 m (< ± 3/32in./100 ft) Ro ta tion Speed: 600 rpm Operating Range (Diameter 1,2 : 400 m (1315 feet) Laser T ype: 635 nm Laser Class: Class 3R, <5mW Self-Leveling Range: approx.
An important point after buying a device Spectra LL300N-8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spectra LL300N-8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spectra LL300N-8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spectra LL300N-8 you will learn all the available features of the product, as well as information on its operation. The information that you get Spectra LL300N-8 will certainly help you make a decision on the purchase.
If you already are a holder of Spectra LL300N-8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spectra LL300N-8.
However, one of the most important roles played by the user manual is to help in solving problems with Spectra LL300N-8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spectra LL300N-8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
