Instruction/ maintenance manual of the product HL450 Spectra
Go to page of 2
www.trimble.com HL450 Laserometer User Guide EMC Declaration of Conformity This receiver has been tested and found to comply with the limits for a Class B digital device for radio noise for digital ap.
Action Display Remarks Initialization: 1. T est of LCD and beeper 2. CAL: Calibration (3 sec.) 3. Unit is ready for use. (Do not power up the unit in a laser beam or strobe. If detected, the unit will display “E200” and revert to the previous calibration.
An important point after buying a device Spectra HL450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spectra HL450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spectra HL450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spectra HL450 you will learn all the available features of the product, as well as information on its operation. The information that you get Spectra HL450 will certainly help you make a decision on the purchase.
If you already are a holder of Spectra HL450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spectra HL450.
However, one of the most important roles played by the user manual is to help in solving problems with Spectra HL450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spectra HL450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
