Instruction/ maintenance manual of the product VM-HT19LCD Speco Technologies
Go to page of 20
VM-HT19LCD High Resolution 19” LCD MONITOR USER MANUAL Speco T echnologies 200 New Highway Amityville, NY 1 1701 800-645-5516 / www .specotech.com.
2 W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTR IC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY MET ALLIC OBJECT THROUGH VEN TILA TION GRILLS.
3 IM P OR T AN T S A FE G U AR D S 1. READ INSTRUCTIONS All the safety and operating instructions sh ould be read before the u nit is operated. 2. RETAIN INSTRUCTIONS The safety and o perating instructions should be retained for future re ference. 3. HEED WARNINGS All warning s on the unit and in the op erating instructions should be adhered to.
4 Federal Communications Co mmissio n (FCC) State men t This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These li mits are designed to prov ide reasonable protect ion against harmful interference in a residential inst allation.
5 W arning……… …………………………………… ……………………………………………… ……… 2 Important Information……………………………… ………….
6 ■ Professional TFT LCD for surveill ance with multiple connections. ■ Compatible with VGA(640X480), SVGA(800X600), XGA(1024X76 8), SXGA(1280X1024) resolution, ■ Picture-In-Picture feature that.
7 You can operate your monitor b y using the butt ons on the front pan el. The side panels provide the inputs to connect other equipment to your monitor.
8 Note: Connecti ons of Audio 1 2 5 3 4 7 8 10 11 12 13 14 15 16 (R) (L) (R) (L) 6 9 (R) (L) (R) (L) 17 Rear Connections 1, 2 AUDIO 2 IN (R, L) S tereo Audio Signal Input, this input is for A V2 (Refe.
9 If you don’t have experience in el ectronic equipment connection before, you may wish to read this section. (Cables are not supplied, just for reference) z Audio cables are usually color coded according to use: red and white for audio.
10 a. Connect PC to Monitor through VGA connector as shown on the above picture b. Connect External device such as DVD or Game Player to Monitor as shown on the above picture c. Connect CCD C amera 1 and 2 to Monitor through Video Input 1 and 2 (BNC Connector) as show ing on the above picture d.
11 AUT O: Auto-optimize displa ying picture under PC mode. Enter: This “ Auto” Button can be either “Enter” function in OSD Menu) CCD Mode: Under A V/1 / A V2 / S-Video press Auto can be changed to CCD/Video mode toggle. MENU: OSD menu ON / OFF control.
12 Auto Source Detect : The monitor will auto detect the video source when power ON. OSD Language : Multi-Language selection in English. Power ON Control : This function is to assign a s pecific video signal when power ON. Key Lock : The Key-Lock function is provided to prevent tempering.
13 Brightness : Adjusts the overall picture shade and brightness. Contrast : Permits adjustment of contrast between light and dark areas of the picture. Color : Adds coloring to the black and white picture content (of a color signal), and is usually set for viewer ’s preference in color saturation.
14 Aut o : Auto detects screen detail dat a such as clock and phase. Brightness : Adjusts the overall picture shade and brightness. Contrast : Permits adjustment of contrast between light and dark areas of the picture. Color T emperature : Selects color temperature of either 6500°K or 9300°K.
15 Vo l u m e : Controls built-in speakers’ output volumes Mute : T o disable the audio function. T o enable, press MUTE again. Default : Sets AUDIO settings to the original factory setting.
16 Multi-Mode : This function allows the PIP mode to be selected. Sub Source : The function allows the PIP Sub source to be selected. Sub Window Size: The selection of PIP window size. Sub Window H-Position : Control the PIP window position in horizontal position.
17 Desktop Arm Mount (VES A Standard) Adjust the viewing angle of LCD to fit most comfortable monitoring status. Mounting the monitor on th e rack Note: When adjusting to a rack, you will need to use an optional rack mount to the back side of the LCD monitor.
18 Before calling a service technician, please check the following table for a possible cause of the problem and some solution. S y m p t o m S o l u t i o n Monitor will not turn on ● Make sure the power cord is plugged in, then press POWER button.
19 ( ∗ 1) The brigh tness spec. Is from panel spec. Design and S pecifications are subject to change w ithout notice. ( ∗ 2) It is not gu aranteed for all the specified range.
20 VM-HT19LCD LCD Color Monitor Dimensions.
An important point after buying a device Speco Technologies VM-HT19LCD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco Technologies VM-HT19LCD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco Technologies VM-HT19LCD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco Technologies VM-HT19LCD you will learn all the available features of the product, as well as information on its operation. The information that you get Speco Technologies VM-HT19LCD will certainly help you make a decision on the purchase.
If you already are a holder of Speco Technologies VM-HT19LCD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco Technologies VM-HT19LCD.
However, one of the most important roles played by the user manual is to help in solving problems with Speco Technologies VM-HT19LCD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco Technologies VM-HT19LCD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
