Instruction/ maintenance manual of the product BeoLab 8000 Bang & Olufsen
Go to page of 8
BEOLAB 8000.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To prevent fire or electric shock, do not expose this appliance to rain or moisture.
Once you have assembled the speakers they are ready for connection to the audio system (or video system), and to the mains (see assembly instructions on the enclosed instruction sheet). Make sure that you have mounted the proper feet on the base: rounded feet for wooden/ parquet floors, or other types of bare floors; spikes for carpeted floors.
Press gently on the black lid (where it is marked PUSH) on the back of the cone to tip out the socket panel. The mains socket and the 8-pin Power Link socket are now accessible. Connect the BeoLab 8000 and the audio system (or video system) using the enclosed 8- pin Power Link cable.
The rubber tube packed with the speaker is a cable cover specially designed for the BeoLab 8000. Run the mains lead and the Power Link cable in the grooves inside the tube so that only one (thick) cable seems to be coming out from each speaker.
The moment you connect the speaker to the mains, a tiny red light appears immediately above the con, behind the cloth, indicating the speaker is on stand-by. When you switch on your Bang & Olufsen system, the BeoLab 8000 speakers switch on simultaneously.
Maintenance Clean the BeoLab 8000 speakers using a soft, firmly wrung lint-free cloth which you have dipped in a solution of lukewarm water containing a few drops of mild detergent, e.g. a dish washing liquid. We recommend that you remove any dust on the black base using a soft brush before you clean it with a sponge.
3506192 0999 Printed in Denmark by Bogtrykkergården a-s, Struer.
An important point after buying a device Bang & Olufsen BeoLab 8000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bang & Olufsen BeoLab 8000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bang & Olufsen BeoLab 8000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bang & Olufsen BeoLab 8000 you will learn all the available features of the product, as well as information on its operation. The information that you get Bang & Olufsen BeoLab 8000 will certainly help you make a decision on the purchase.
If you already are a holder of Bang & Olufsen BeoLab 8000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bang & Olufsen BeoLab 8000.
However, one of the most important roles played by the user manual is to help in solving problems with Bang & Olufsen BeoLab 8000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bang & Olufsen BeoLab 8000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
