Instruction/ maintenance manual of the product DVR-X1 Speco Technologies
Go to page of 26
DVR-X1 Operating Instructions Single Input DVR System Speco Technologies 200 New Highw ay Amityville. NY 1 1701 T el. 631-957-8700 Fax. 631-957-9142 ww w .
DVR-X1 User Manual Content s 1. Features………………………………………………………. 2 2. S pecification…………………………………………………... 3 3. Rear Panel Description……………………………………… 4 4.
DVR-X1 User Manual 1. Features Automatically detects NTSC/P AL. (Please connect the video source before powering the DVR-X1.) Digital recording replaces conventional time-lap se recorder . V ideo compression MJPEG . Motion detection recording.
DVR-X1 User Manual 2. S pecification Operation Mode Front p anel, OSD Recording Speed 720 x 240 : 1–10 Frames/sec (adjust able) 360 x 240 : 1–15 Frames/sec (adjust able) Recording Mode Manual Sche.
DVR-X1 User Manual 3. Inst allation Rear p anel Power Supply ： 12V DC ， 4A. VIDEO IN ： Image signal input, connected to the video source. VIDEO OUT ： “ VIDEO OUT ” is connected to monitor ” VIDEO IN ”. VCR OUT ： “ VCR OUT ” can be connected to the ” VIDEO IN ” of a VCR.
DVR-X1 User Manual 4. Function Key Description Front Panel MENU ： Menu set up ENTER ： Enter to sub-menu or editing procedure. EXIT ： Press this function key to return to the previous selection. ←： Move to the left (up) item during editing procedure.
DVR-X1 User Manual 6.
DVR-X1 User Manual 5. Playback Mode 5.1 Play Mode In normal or sequence mode, press <PLA Y> key to enter the playback mode, or press <SEARCH> key to enter the log files list (including: date, time), then press <PLA Y> key or <ENTER> key to display image.
DVR-X1 User Manual 5.2 SEARCH According to date and time to perform searching function, press <SEARCH> key to display the image below ： Use < ← > 、 < → > key to move the cursor (Highlight) up and down to the area to be modified, press < ＋ > 、 < － > key to make changes.
DVR-X1 User Manual 9.
DVR-X1 User Manual 6. Recording Mode Manual Recording ： Under Normal mode, pressing the <REC> key will start recording and pressing the <ST OP> key will stop manual recording.
DVR-X1 User Manual 7. Menu Set Up 7.1 Enter Main Menu Press the <MENU> key to enter the Main Menu , using the cursor , which can be moved up and down by the < ← > 、 < → > keys.
DVR-X1 User Manual 7.3 Date / T ime When entering the main menu select Date / T ime and press the <ENTER> key: DA TE / TIME DATE FORMAT YY/MM/DD D A T E O N 0 2 / 0 1 / 0 1 T I M E O N 20:30:00 .
DVR-X1 User Manual a. LEFT TOP b. R I G HT TO P c. LEFT BOTT OM d. RIGHT BOTTOM e. TOP f. BOTT OM When recording, date / time will be stored together with the image. Please try and prevent the constant changing of date / time setu p. Thus, to prevent any unnecessary error to occur.
DVR-X1 User Manual 7.4 Record Setting When entering the main menu, select Record Setting and press the <ENTER> key to enter the menu ： RECORD SETTING QUA LITY HIGH RESOLUTION 720X240 REC RATE .
DVR-X1 User Manual Stop : When the disk is full it stop s recording (screen display dis k full message warning). Audio In ： ON ： Audio recording “ON”. O F F ： Audio recording ”OFF”. Record Time ： To t a l T i m e ： According to resolution, the HDD Capacity and the recording rate reflects the to t al available recording time.
DVR-X1 User Manual 7.5 Record Mode In the Main Menu move the cursor toward Record Mode , press <ENTER> key to enter the recording mode display: RECORD MODE SCHEDULE RECORDING REC BEGIN / END OFF.
DVR-X1 User Manual End ： Ending time for recording. ＊ Example: For 24H recording, the settings of the begin time must be the same as the ending time (enter 06:00 am – 06:00am) For other time settings, recording time from 08:00 am to 21:00 pm (enter 08:00 – 21:00).
DVR-X1 User Manual Press < ← > 、 < → > key to move the cursor Press < ＋ > 、 < － > key to switch ON/OFF the motion detection area. P r e s s <EXIT> key to return to the previous page. Press <ST OP> key to skip over the main menu.
DVR-X1 User Manual (Sensor triggers the alarm and start s recording after 0.2 second) 2: 0.5 Sec. (Sensor triggers the alarm and start s recording after 0.5 second) 3: 1 Sec. (Sensor triggers the alarm and start s recording after 1 second) 4: 2 Sec. (Sensor triggers the alarm and start s recording after 2 second) 5 : 5 S e c .
DVR-X1 User Manual 7.6 Alarm Output In the main menu select Alarm Output , and press the <ENTER> key to enter the menu ： ALARM OUTPUT SETUP BUZZER : OFF PERIOD : 01 MIN RELA Y : ON PERIOD : 02 MIN Press < ← > 、 < → > key to move the cursor Press < ＋ > 、 < － > key to change the settings.
DVR-X1 User Manual 7.7 V ideo Loss Alarm In main menu, move the cursor to V ideo Loss Alarm and press the <ENTER> key to enter the Video Loss Setup menu ： VIDEO LOSS ALARM A L A R M O N Press .
DVR-X1 User Manual 7.8.1 Set Password Move the cursor to Set Passwords . CHECK PASSWORD **** Press the <ENTER> key to enter the menu . Press < ← > 、 < → > key to move the cursor . Press < ＋ > 、 < － > key to change the password.
DVR-X1 User Manual OFF : T o hide the camera title 7.8.3 V ideo Quality BRIGHT 18 CONTRA ST 46 CHROMA 32 SHAR P 20 Adjust camera brightness, contrast, color and chroma.
DVR-X1 User Manual the hard disk. Press the <EXIT> key to return to the previous page. 7.8.5 Color Bar Color Bar is helpful to user in monitor settings. 7.8.6 Load Factory Default T o load the factory defaults, please press “ YES ”, than press the <ENTER> key to complete the setup procedure.
DVR-X1 User Manual 25 8. System Inst allation Diagram.
An important point after buying a device Speco Technologies DVR-X1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco Technologies DVR-X1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco Technologies DVR-X1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco Technologies DVR-X1 you will learn all the available features of the product, as well as information on its operation. The information that you get Speco Technologies DVR-X1 will certainly help you make a decision on the purchase.
If you already are a holder of Speco Technologies DVR-X1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco Technologies DVR-X1.
However, one of the most important roles played by the user manual is to help in solving problems with Speco Technologies DVR-X1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco Technologies DVR-X1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
