Instruction/ maintenance manual of the product 8WM Speco Technologies
Go to page of 12
Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 1 1 / 10 /09. DVR4WM/8WM/16WM Setup Guide Speco T echnologies 200 New Highway Amityville, NY 1 1701 800-645-5516 www .
2 DVR4WM/8WM/16WM Setup Guide Package Content Inspect the DVR’s p ackaging. Make sure that the DVR-4WM/8WM/16WM is packed properly . Remove all items from the box and make sure it contains the following item s.
3 7 Main Monitor Audio Out Main Monitor Audio Out RCA connector is provided for the DVR to connect an a udio output device (e.g. an amplified spea ker). 8 Call Monitor Audio Out Call Monitor Audio Out RCA connector is provided for the DVR to connect an audi o output device (e.
4 Pin Definition of Alarm I/O & RS-485, and Audio In Alarm I/O & RS-485: DVR-4WM: Pin Definition Pin Definition Pin Definition Pin Definition 1 Alarm Out Open 5 Alarm In 1 9 Alarm Out Close 13.
5 Basic Setup Enter the OSD main menu to setup some basic configurations of the DVR. The basic configuration must be set with the OSD on the DVR. Enter OSD Main Menu: • Press MENU button on the remote controller to enter the OSD main menu. • Enter username and password.
6 • T o change the IP address, Netmask, Gateway and DNS value, press UP/DOW N ke ys to move the cursor to the item. Use LEFT/RIGHT keys to access each section of the value and press ENTER, then change the value using UP/DOWN keys. • PPPoE user s must set the < PPPoE Account >, < PPPoE Password > and < PPPoE Max Idle > as well.
7 Dome Camera Control Dome Camera Connection & Settings: • See section Pin Definition of Alarm I/O & RS-485 , and Audio In for RS-485 port pin definition. • Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively .
8 Connect the DVR via S pecoRemote Setup Requirement s: • Make sure the PC is connected to the Internet. • Obtain IP address of the DVR-4WM/8WM/16WM . T o check the DVR’ s IP address, press MENU on the remote controller and select < System Setup > Æ < Network Setup > Æ < LAN Setup > Æ < IP > to check the IP .
9 • V ersion verification start s automatically to verify whether S peco Remote was installed. This process may take up to 30 seconds. • When the software is completely downloaded and inst alled, the Login Screen is displayed. • Enter the username and password.
10 S pecoRemote Playback Playback Remote V ideo: • Click < Play > on the main window toolbar , and then < Remote Playback > tab. • The < From > and < To > on top of the screen display the date and time from which recorded video is available for playback.
11 Mobile V iew Software The DVR-4WM/8WM/16WM provides mobile surveillance software called Mobile View Software. This allows users to monitor via a mobile device with internet connection. The Mobile View Software can be downloaded from the official website http://www.
12 Speco T echnologies 200 New Highway Amityville, N Y 1 1701 800-645-5516 www .specotech .com.
An important point after buying a device Speco Technologies 8WM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco Technologies 8WM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco Technologies 8WM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco Technologies 8WM you will learn all the available features of the product, as well as information on its operation. The information that you get Speco Technologies 8WM will certainly help you make a decision on the purchase.
If you already are a holder of Speco Technologies 8WM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco Technologies 8WM.
However, one of the most important roles played by the user manual is to help in solving problems with Speco Technologies 8WM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco Technologies 8WM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
