Instruction/ maintenance manual of the product Speedzone Comp CR2302 Specialized
Go to page of 11
The following functions are available on your SpeedZone Comp bicycle computer: • SPD - Current Speed • A VS - A verage speed • MAX - Maximum Speed • A TM - Automatic Star t/T imer • DST - T .
MOUNTING THE SPEEDZONE COMP The SpeedZone Comp sensor can mount on the right or the left side of the fork blade. Use the cable tie-wraps provided to position the sensor . Do not tighten until the final placement of the sensor magnet is correct. ( See figure 1) Attach the magnet to a spoke across from the sensor with the magnet screw .
"FUNCTION" (left side) button and ‘tap’ the "MODE" button once. The Km/h, m/h indicator will begin blink- ing. Y ou may now alternate between miles and kilometers by pressing the "MODE" button. When the correct choice is flashing, select it by pressing the "FUNCTION" button.
selected tire size for wheel option #1. T o scroll through the preprogrammed tire sizes, tap both the "MODE" and "FUNCTION" buttons simultaneously . When you reach the desired tire size press the "FUNCTION" button once to select it and enter Easy Calibration Mode for wheel option #2.
the "MODE" and "FUNCTION" buttons simultaneously until the display shows a four-digit number . This number represents your tire circumference in millimeters. Press the "MODE" button until the flashing digit is correct. (Note: The "MODE" button may be held to scroll to the correct digit.
manually and records the time whether the wheel is rotating or not. T apping the "FUNCTION" button starts and stops the stopwatch and holding the "FUNCTION" button for three seconds will reset to stopwatch. Note: The average speed (A VS) will be calculated differently based upon the selection of A TM or TM.
Average Speed (A VS) The average speed is displayed on the lower line of the screen when A VS is shown on the left. The average speed is based upon whether the A TM or the TM mode has been selected, the resolution of the average speed is shown in 0.1M/h or Km/h increments.
be reset by pressing the "FUNCTION" button for three seconds. The resolution is 0.01 miles (0.01 Kilometers). The trip distance is shown on the lower line if the screen. (See figure13) Odometer (ODO) The odometer will record the total distance traveled up to 99,999 miles or kilometers and then roll to zero.
line of the screen), Current Time (on analog clock), and your choice of one of the following: Average Speed, Maximum Speed, Current Time (digital clock), T rip Distance, Inter val Timer or Odometer . INST ALLING THE BA TTERY Should you need to replace the bat- ter y , push the computer backward to remove it from the handlebar mount.
• See your authorized Specialized dealer if you have any trouble installing or maintaining your computer . • Clean the unit with a mild detergent and a soft dr y cloth. Never use any kind of solvent or alcohol. • The SpeedZone Comp computer is intended for use on bicycles only and should not be used on any motorized vehicle.
SPECIFICA TIONS Current Speed 0.0 to 99.9 MPH 0.0 to 99.9 Km/H A verage Speed (A VS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Maximum Speed (MXS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Stopwatch (TM) 0 to 9hrs, 59min, 59sec. recycling type Automatic Timer (A TM) 0 to 9hrs, 59min, 59sec.
An important point after buying a device Specialized Speedzone Comp CR2302 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Specialized Speedzone Comp CR2302 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Specialized Speedzone Comp CR2302 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Specialized Speedzone Comp CR2302 you will learn all the available features of the product, as well as information on its operation. The information that you get Specialized Speedzone Comp CR2302 will certainly help you make a decision on the purchase.
If you already are a holder of Specialized Speedzone Comp CR2302, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Specialized Speedzone Comp CR2302.
However, one of the most important roles played by the user manual is to help in solving problems with Specialized Speedzone Comp CR2302. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Specialized Speedzone Comp CR2302 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
