Instruction/ maintenance manual of the product CylcoComputer Specialized
Go to page of 12
The following functions are available on your SpeedZone Elite bicycle computer: • SPD - Current Speed • A VS - Average speed • MAX - Maximum Speed • A TM - Automatic Start/Timer • DST - T ri.
MOUNTING THE SPEEDZONE ® ELITE The SpeedZone ® Elite wireless transmit- ter can mount on the right or the left side of the fork blade. The right side should be used on large frames or when a suspension fork is installed.
sensor wire along the head tube, down tube and chain stay of your bicycle and secure it into place using the provided tie-wraps. (See figure 4) Next, attach the cadence magnet to the inside of your crank arm directly across from the sensor . Use a tie-wrap to fasten the magnet to the crank arm.
2. Setting the Programmable Odometer This mode is useful if you have replaced the batter y and would like to retain the mileage you have already ridden. T o access the programmable odometer mode, first advance the "MODE" button until (ODO) appears on the left-hand side of the screen.
Roll Out Method The roll out method will provide the most accurate computer calibration and can take into account variables such as inflation pressure, rim width and rider weight. 1. Extend a tape measure out to 3000mm (120 inches) and lock it in place.
Repeat the process until all four digits are entered as your tire circumference. Press the "FUNCTION" button once to select it and enter the circumference for wheel option #2. Follow the same procedure to program the wheel #2 tire size and tap the "FUNCTION" button to exit circumference pro- gramming mode.
mode has been selected, press the "FUNCTION" button to advance to the next operating mode. 6. Inter val Timer Y our Speedzone Elite is equipped with an Inter val Timer . This feature allows you to customize your training by inte- grating a programmable repeating countdown timer into your workout.
speed is retained in memor y and up- dated when a higher speed is attained. The maximum speed can be reset by pressing the "FUNCTION" button for three seconds. (See figure 14) Auto Star t/Stop Timer (A TM) In A TM mode the stopwatch function records the actual time spent riding.
T rip Distance (DST) T rip distance mode will record up to 999.99 miles or kilometers and then roll to zero. The trip distance function can be reset by pressing the "FUNCTION" button for three seconds. The resolution is 0.01 miles (0.01 Kilometers).
re-enter them when you restart the computer . T urn the computer over so the display is facing downward. Use a coin to unthread the batter y cap from the computer . Install the batter y (model CR2302) with the positive pole (+) facing upward. Carefully thread the batter y cap back onto the case with a coin.
SPECIFICA TIONS Current Speed 0.0 to 99.9 MPH 0.0 to 99.9 Km/H Average Speed (A VS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Maximum Speed (MXS) 0.0 to 199.9 MPH 0.0 to 199.9 Km/H Stopwatch (TM) 0 to 9hrs, 59min, 59sec. recycling type Automatic Timer (A TM) 0 to 9hrs, 59min, 59sec.
Inter val Timer (INT) 5 sec. to 9hrs, 59min, 59sec. T rip Distance (DST) 0 to 999.99 miles or Km Odometer (ODO) 0 to 99,999 miles or Km Operating T emperature 40°F to 104°F (4°C to 40°C) SpeedZone is a registered trademark of Specialized Bicycle Components Inc.
An important point after buying a device Specialized CylcoComputer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Specialized CylcoComputer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Specialized CylcoComputer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Specialized CylcoComputer you will learn all the available features of the product, as well as information on its operation. The information that you get Specialized CylcoComputer will certainly help you make a decision on the purchase.
If you already are a holder of Specialized CylcoComputer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Specialized CylcoComputer.
However, one of the most important roles played by the user manual is to help in solving problems with Specialized CylcoComputer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Specialized CylcoComputer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
