Instruction/ maintenance manual of the product 23A Specialized
Go to page of 12
1 2004 TURBO ® PRO CYCLOCOMPUTER Congratulations on your purchase! Y ou are now the owner of the world’ s most advanced cyclocomputer . Y our Specialized T urbo® Pro features a wireless speed transmitter and a wired cadence sensor . Additionally , it incorporates a revolutionar y new backlit three-line LCD screen.
3 T urn the computer over so the display is facing downward. Use a coin to unthread the batter y cap from the computer . Install the batter y (model CR2032, Specialized P/N 481-3004) with the positive pole (+) facing upward. Carefully thread the batter y cap back onto the case with a coin.
the transmitter should be approximately 1/32 ” - 1/16 ” (1- 2mm). Tighten the magnet and transmitter . Do not over-tighten the magnet screw . (See figure 5). For wheels with bladed spokes: Use some isopropyl (rub- bing) alcohol or a mild detergent to thoroughly clean the spoke that you plan to attach the magnet to.
MODE/SET rocker switch. There are eight cycling modes available: 1) Clock Mode, 2) Distance Mode, 3) Speed Mode, 4) Timer Mode, 5) Cadence Mode, 6) Countdown Mode, 7) Altitude Mode and 8) T emperature Mode. Within each mode there is a side- mode that will allow you to access additional informa- tion such as average and maximum speeds.
mode. T o enter a mileage into the odometer , press the “ MODE ” button until the flashing digit is correct. (Note: The “ MODE ” button may be held to quickly scroll to the correct digit.) Press the “ SET ” button to select the next digit to the right.
11 variables such as inflation pressure, rim width and rider weight. 1. Extend a tape measure out to 3000mm (120 inch- es) and lock it in place. 2. With your tire inflated to its proper pressure, place the valve at the 6:00 position (at the bottom) directly over the start of the measuring tape.
accept the hour selection. The minutes will flash and can be adjusted by press- ing the “ MODE ” button. (Hold the “ MODE ” button to scroll through the digits quickly) Press the “ SET ” button to set the minutes and return to clock mode 6.
until “ AL TI ” appears. Note: if your display says “ AL TI Ò” or “ %GRD ” , press the “ SET ” button to change to “ AL TI ” . Then press the “ SET ” button for three sec- onds. The first altitude digit will begin flashing. Press the “ MODE ” button until the desired number appears.
Auto Star t/Stop Timer (A TM)- In A TM mode the timer function records the actual time spent riding. It oper- ates only when there is speed input and is dis- played In the Digital Display Area of the screen Timer Mode (TIMER)- In TIMER mode the stop- watch function will operate when the “ TOP ” button is pressed.
T ech note: The inclinometer calculates percentage of grade by comparing the change in altitude to the distance traveled. This data is updated on the LCD dis- play ever y 5 seconds and is based upon data accu- mulated during the previ- ous 20 seconds.
• Clean the unit with a mild detergent and a soft dr y cloth. Never use any kind of solvent or alcohol. • The T urbo ® Pro computer is intended for use on bicy- cles only and should not be used on any motorized vehicle. SPECIFICA TIONS: Current Speed: 0.
T urbo® is a registered trade- mark of Specialized Bicycle Components Inc. © 2003 Specialized Bicycle Components Inc. WWW .SPECIALIZED.COM City, UT 84104, USA. Attn: Turbo ® Pro Warranty. Be sure to include a letter indicating the spe- cific reasons for returning the product and proof of date of pur- chase.
An important point after buying a device Specialized 23A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Specialized 23A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Specialized 23A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Specialized 23A you will learn all the available features of the product, as well as information on its operation. The information that you get Specialized 23A will certainly help you make a decision on the purchase.
If you already are a holder of Specialized 23A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Specialized 23A.
However, one of the most important roles played by the user manual is to help in solving problems with Specialized 23A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Specialized 23A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
