Instruction/ maintenance manual of the product M8672412 Spalding
Go to page of 19
1 10/05 ID# M867241 2 High End Residential In-Ground Basketball System Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. Toll-Free Customer Service Number for U.S: 1-800-334-9111 Hydra-Rib Internet Address: http://www.
2 ID# M867241 2 10/05 IMPORT ANT! WRITE MODEL NUMBER FROM BOX ONTO P AGE 1 OF THIS OWNERS MANUAL Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
Item Qty. Part No. Description 1 1 958860 Pole 2 1 958850 Plate, Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, 3/8 Locking, .380 I.D., .63 O.D. 7 2 250001 Bolt, Hex, Tap, 3/8-16 x 4” Long 8 2* 250002 Bolt, Hex, Tap, 3/8-16 x 2” Long 9 1 203457 Label, Logo, Vinyl, 2.
4 ID# M867241 2 10/05 Item #36 (1) Item #5 (4) Item #35 (1) Item #13 (2) Item #34 (4) Item #24 (9) Item #21 (16) Item #7 (2) Item #8 (2*) Item #26 (1) Item #25 (12) Item #29 (4) Item #28 (3) Item #22 .
5 10/05 ID# M867241 2 Ensure ground is level with playing surface, then dig pole hole. Inst all threaded ends of J-bolt s (19) through holes in mounting plate (2) and secure as shown. 2 25 25 25 19 19 Install nut (25) to J-bolt (19) as shown. Repeat procedure for remaining three J-bolts (19).
6 ID# M867241 2 10/05 Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to release any air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to level mounting plate on top of drainage hill.
7 10/05 ID# M867241 2 I nsert bushings (38, 39, and 40) into areas shown. 6. 38 38 38 1 10 39 39 17 18 40 40 40 40 40 40 40 40 39 39 38 38 38 38 38 40 38 39 38 IMPORT ANT! Bushing types are identified with a letter .
8 ID# M867241 2 10/05 Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes in m ounting plate (2) as shown. 7A. 22 28 1 PLA YING SURF ACE 2 Insert bolt (28) through holes in plate and pole and secure with nut (22).
9 10/05 ID# M867241 2 THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! 8. TWO people are required to lift pole into p osition so that the threaded assembly rod (14) can be installed and secured by the THIRD person.
10 ID# M867241 2 10/05 While still in forward position, attach both upper and lower yokes (17 & 18) to pole as shown. 9. 22 21 28 21 17 18 THREE PEOPLE R EQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
11 10/05 ID# M867241 2 Attach elevator adjustment (12) to lower yoke (18). 10. 22 12 38 21 20 18 21 38 THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
12 ID# M867241 2 10/05 Attach elevator adjustment (12) to pole bracket. 11 . THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
13 10/05 ID# M867241 2 Attach backboard (10) to upper and lower yokes (18 & 17). First attach board (10) to upper yoke (17), using TWO people to hold the board and ONE person to attach hardware (FIG . A). Use hardware as shown in FIG . B. 12. A. FIG.
14 ID# M867241 2 10/05 13. 5 8 Refer T o Instructions Included With Rim Hardware For Rim Assembly . 3 Rim Assembly 6 10 7 IMPORT ANT! Carefully cut and peel protective film away from board prior to attaching rim. 16 Before starting rim assembly , tighten nut (26) until it is positioned 6-3/4” from the end of the rod (14) as shown (Figure A).
15 10/05 ID# M867241 2 14. A. 15. Apply height indicator labels (32 & 31) to height indicators (30). 2. 4. 3. 1. Install net (4) to rim as shown. 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9.
16 ID# M867241 2 10/05 7 PLA YING SURF AC E WAR NING F A I L U R E T O FO L L O W TH E S E W A R N I N G S M A Y R E S U L T I N S E R I O U S I N J U R Y A N D / O R P R O P E R TY D A M A G E .
17 10/05 ID# M867241 2 17. After pole has been secured to the anchor plate (2) loosen nut (26), r emove cotter pin (37), and pull out pin (36). This will allow the removal of the threaded assembly rod (14) which is no longer necessary for the remainder of the assembly and installation of system.
18 ID# M867241 2 10/05 12 19. Apply height adjust ment label (1 1). Adjust system by turning crank until desired height is reached per height indicator (30). 11 30 10 feet (3.05 m) READ AND UNDERSTAND WARNING & HEIGHT ADJUSTMENT LABELS BEFORE USING THIS UNIT.
19 10/05 ID# M867241 2 Subject to proper installation and normal use, Hydra-Rib ® warrants, subject to limit ations below , to the original retail purchaser all structural components of the Hydra-Rib ® system to be free of defects in material and workmanship for the duration of ownership by the original retail purchaser .
An important point after buying a device Spalding M8672412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spalding M8672412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spalding M8672412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spalding M8672412 you will learn all the available features of the product, as well as information on its operation. The information that you get Spalding M8672412 will certainly help you make a decision on the purchase.
If you already are a holder of Spalding M8672412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spalding M8672412.
However, one of the most important roles played by the user manual is to help in solving problems with Spalding M8672412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spalding M8672412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
