Instruction/ maintenance manual of the product MN903 Baldor
Go to page of 8
MN903 No. 275P Replaces 275N LB7008 1 MN903 Instruction Manual For Baldor Grinders SAFETY NOTICE : W ARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries if the machine is not properly used and warnings are not properly followed.
2 MN903 SAFETY NOTICE Continued W ARNING: Never install a wheel that is damaged, such as a chip or crack on any surface. A damaged wheel can disintegrate while rotating at a high RPM or when work is placed against the wheel. This can severely harm the operator or others in the area.
3 MN903 SAFETY NOTICE Continued Use wheels rated at or over rated grinder RPM shown in the following table. Wheel Size No Load RPM D" Diameter (inches) W" Width (inches) H" Arb.
4 MN903 Electrical Instructions Single phase grinders are rated dual voltage. Some single phase grinders are equipped with cord and grounding type plug for 1 15 volts. T o use with a different voltage, see instructions provided to make wiring changes.
5 MN903 Grounding Instructions Continued 4. Permanently connected grinders: This grinder should be connected to a grounded, metal, permanent wiring system; or to a system having an equipment – grounding conductor .
6 MN903 Maintenance W ARNING: Prevent electrical shock hazard and accidental machine operation. Always disconnect grinder from the power source before servicing, changing accessories (such as wheels, tool rest, spark arrestor , etc.) or before performing maintenance.
7 MN903.
P .O. Box 2400 Ft. Smith, AR 72902 – 2400 (479) 646 – 471 1 Fax (479) 648 – 5792 www .baldor .com Baldor Electric Company Printed in USA PS500 9/03 8 MN903 LIMITED W ARRANTY Unless otherwise provided, Baldor grinders are warranted against defects in Baldor workmanship and materials for a period of Thirty – Six months.
An important point after buying a device Baldor MN903 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baldor MN903 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baldor MN903 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baldor MN903 you will learn all the available features of the product, as well as information on its operation. The information that you get Baldor MN903 will certainly help you make a decision on the purchase.
If you already are a holder of Baldor MN903, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baldor MN903.
However, one of the most important roles played by the user manual is to help in solving problems with Baldor MN903. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baldor MN903 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
