Instruction/ maintenance manual of the product Angina A4 Soundstream Technologies
Go to page of 12
RUBICON Angina A4 Power Amplifiers Owner’s Manual and Installation Guide.
Conuru fulations! You now own a Soundstream RUBICON amplifier, the product of an uncom- promising design and engineering philosophy. Your Soundstream RUBICON amplifier will outperform any other amplifier in the world. To maximize the performance of your system, we recommend that you thor- oughly acquaint yourself with its capabilites and features.
Desiun features of the An&a Desim Features of the An&a SLA/SHTM (Speaker Load Adapting I Subwoofer Hyper-Efficient) This new dual function technology currently operates in two different ways in different models.
Desiun Features of the A4 + RUBITM Power Supply (Rapid-Use Branched Impulse) Our new power supply eliminates “power sags” during low frequency reproduction by rapidly increasing the duty cycle, stabilizing the power supply and allow- ing it to deliver the power required when reproducing low frequencies.
Cal/outs for the An&a Tbp Panel Callouts for the An&a Front Panel SOUNDSTREW LP X-OVER / 1 1. 2. 3. 4. Power LED - Indicates amplifier power. Subsonic / Hawkins Bass Control Switch - Select “Subsonic” to engage the Subsonic filter at 13Hz.
Callouis for the A4 Cal/outs for the A4 Top Panel View 2. Subsonic / Hawkins Bass Control Switch - Select “Subsonic” to engage the Subsonic filter at 13Hz. Select ‘Hawkins Bass Contro/“to engage the +6dB boost @ 45Hz for the lowpass channel. 3.
Crossover Adiustmen ts Hawkins Bass Control ANGINA CROSSOVER The ANGINA is designed as a mono subwoofer amplifier. This means the amplifier will direct 200 watts of pure hard-core bass to your subwoofers. It handles these low frequencies with a Butterworth, 12dB/octave low pass filter.
Wiring Ins tda tion and Moun ting POWER A ND GROUND A MPLINER LOCATION To ensure maximum output from your RUBICON amplifier, use high quality, low- oss power and ground cables and connections. The RUBICON amplifiers will Iccept an 8 gauge power and ground cables.
Level Setting ~ The input levels are adjusted by means of the input level controls located on the front of the amplifier as shown below in the shaded area. This is a unique dual- stage circuit that adjusts both level and gain. This topology maintains better S/N Ratio even when using sources with minimal output.
.
An&a and A4 Sarnde System Complete Sys feti while using a Factory Radio RADIO Spmkrr Lwcl O”, Front Speakers Troubleshoo thy PROBLEM No Sound and power LED is not lit No sound, power LED is lit Amplifier output cuts on/off repeatedly Repeatedly blow amp fuse; frequent activation of Trident protection or Smart Power Supply Circuit CAUSE 1.
SDecifica tions for the An&a Specifications for the A4 MODEL 4 Sz Mono (12.6 Vdc) 2 fi Mono (14.4 Vdc) Angina I 100wx1 I 2oowx1 I THD Signal to Noise Frequency Response Stereo Separation Damping Input Sensitivity Input Impedance <O.l% >90dB 20Hz (+0.
An important point after buying a device Soundstream Technologies Angina A4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soundstream Technologies Angina A4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soundstream Technologies Angina A4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soundstream Technologies Angina A4 you will learn all the available features of the product, as well as information on its operation. The information that you get Soundstream Technologies Angina A4 will certainly help you make a decision on the purchase.
If you already are a holder of Soundstream Technologies Angina A4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soundstream Technologies Angina A4.
However, one of the most important roles played by the user manual is to help in solving problems with Soundstream Technologies Angina A4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soundstream Technologies Angina A4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
