Instruction/ maintenance manual of the product EXC.4 Soundstream
Go to page of 12
Component Speaker System OWNER'S MANUAL.
1 Component Speaker System INTRODUCTION AND REGISTRATION Congratulations on your purchase of the Soundstream EXC Component Speake r System. You now own one of the finest car audio speaker systems available. A s with all high quality car audio components, professional installation is recommended.
2 The EXC Component Speaker System is the result of highly focused engineering effort. Each element of the EXC system repres ents several advances in automotive speake r technology. When the EXC project was initiated, the following goals were established: • High performance sound reproduction in the automotive environment.
LOCATION AND MOUNTING 3 The first step in a successful installation is thorough planning. Choose the location for your speaker components carefully. Follow these suggestions to ensure proper imaging and the best performance: • Select a location where each tweeter and midrange/woofer can be mounted close to each other.
TWEETER SURFACE MOUNTING 4 1) Remove the tweeter's plastic backplate by separating the plate from the tweete r housing with your two thumbnails at one of the terminal locations, gently prying the two pieces until they snap apart.
INSTALLING THE EXC MIDRANGE- WOOFER 5 The EXC Midrange/Woofer can be mounted on the front or rear of a panel; gaskets are provided for both options. The bolt-hole configuration will fit a variety of standard OEM patterns making it ideal for direct replacement.
MOUNTING THE EXC CROSSOVER 6 The EXC Passive Crossover can be mounted in virtually any location inside the vehicle. Be sure not to mount the EXC system crossover outside the vehicle, or in a location where it may be exposed to dirt or moisture (e.g., the engine compartment, inside a wheel housing, inside a door, at the bottom of a leaky trunk).
WIRING 7 EXC System Wiring Diagram Figure 8 shows a diagram illustrating the wiring of the EXC Component Speake r System. It is important to make sure that all connections are in phase; that is positi.
8 NOTES ON BI-AMPING Bi-Wiring The EXC component system includes the EXC passive crossover which is optimized for the speakers. The EXC crossove r allows for dual amp inputs. See Figure 9. This feature allows for a 4 channel amplifier or two 2 channel amplifiers to power the four individual drivers of an EXC .
NOTES ON BI-AMPING ( CONTD. ) 9 Bi- A mping True bi-amping can also be accomplished with an external electronic crossover. See Figure 10. Even greater dynamics can be realized with bandwidth-limited amplifiers.
SPECIFICATIONS EXC System Specifications Frequency Response 70 Hz - 20,000 Hz +/-3dB 60 Hz - 20,000 Hz +/-3dB 50 Hz - 20,000 Hz +/-3dB Sensitivity 90 dB SPL at 1 meter (2.83v) 96 dB SPL at .5 meter (2.83v) 91 dB SPL at 1 meter (2.83v) 97 dB SPL at .5 meter (2.
1550 Maple Ave., Montebello, CA 90640 US A Phone: (323)724-4600 Fax: (323)722-8125 www.soundstream.com.
An important point after buying a device Soundstream EXC.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soundstream EXC.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soundstream EXC.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soundstream EXC.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Soundstream EXC.4 will certainly help you make a decision on the purchase.
If you already are a holder of Soundstream EXC.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soundstream EXC.4.
However, one of the most important roles played by the user manual is to help in solving problems with Soundstream EXC.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soundstream EXC.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
