Instruction/ maintenance manual of the product D200 II Soundstream
Go to page of 7
D200 II DUAL MONAURAL AMPLIFIER CLASS A 100 PURE CLASS A AMPLIFIER DlOO II STEREO AMPLIFIER CLASS A 50 II PURE CLASS A AMPLIFIER D60 II STEREO AMPLIFIER Owner’s Manual.
Soundstream Stereo Amplifier Owner’s Manual Thank you for purchasing a Soundstream amplifier. You now own one of the finest power amplifiers available, a precision instrument capable of audiophile quality performance. To get the most out of your amplifier, we suggest that you carefully acquaint yourself with their capabilities and design.
INSTALLATION The design topology of all Soundstream amplifiers utilize multiple Darlington output devices with a total rated output capability that far exceeds the potential output of the amplifier.
LOCATION AND MOUNTING The first step in an installation is thorough planning. Choose the location for your amplifier carefully, The amplifier should be located in either the passenger compartment or the trunk, never in the engine com- partment or any outside location exposed to dirt or moisture.
POWER CONNECTIONS Note: Your amplifier can only be operated from a 12- Volt Negative Ground electrical system. If your car was produced before 1970, or if you have any doubts, make sure of the type of electrical system you have before making any connections.
PROTECTION CIRCUITS Your amplifier is protected and short circuits. If one channel shuts down, fuse for that channel. If after again, contact Soundstream Soundstream dealer against both overheating ch.
SPECIFICATIONS: D-6011 Power Output 30 W/ch X 2, 20Hz-20kHz Into 4Q 45 W/ch X 2, 20Hz-20kHz Into 2Q 80 Watts Mono, 20Hz-20kHz Into 452 Total Harmonic Distortion < O.l%, 20Hz-20kHz At Full Rated Power Into 4a S/N Ratio: 110 dB Damping Factor: >200 Input Impedance: 10 K Idle Current Draw: .
An important point after buying a device Soundstream D200 II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soundstream D200 II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soundstream D200 II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soundstream D200 II you will learn all the available features of the product, as well as information on its operation. The information that you get Soundstream D200 II will certainly help you make a decision on the purchase.
If you already are a holder of Soundstream D200 II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soundstream D200 II.
However, one of the most important roles played by the user manual is to help in solving problems with Soundstream D200 II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soundstream D200 II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
