Instruction/ maintenance manual of the product BVM-D24E1WU Balcar
Go to page of 5
BID SPECIFICATION FOR BROADCAST CRT MONITORS MODEL NUMBER BVM - D 2 4E 1 W U INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS.
1.0 General Information The purpose of this information is to provide the specification for a product whose p rimary purpose is the reproduction of video information for one or more viewers. This reproduction of this information is to be accomplished via a direct - view CRT monitor.
4.0 User Interface / Controllability Information Control of this device shall be accomplished through one of the following methods: Parallel Remote Control RS - 485 Serial Control This device shall provide a Type II PCMCIA card slot to store monitor settings locally.
This d evice shall support switchable aspect ratios of 4:3 and 16:9, and shall offer a 4:3 area marker. This device shall provide beam landing correction to compensate for changes in the terrestrial magnetic field in different operating environments.
This device shall accept power at 100 - 240 VAC at either 50 or 60 Hz. This device shall consume no more than 205 watts. Power to this device shall be supplied via a detachable standard power cord that is readily available for replacement from local suppliers.
An important point after buying a device Balcar BVM-D24E1WU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Balcar BVM-D24E1WU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Balcar BVM-D24E1WU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Balcar BVM-D24E1WU you will learn all the available features of the product, as well as information on its operation. The information that you get Balcar BVM-D24E1WU will certainly help you make a decision on the purchase.
If you already are a holder of Balcar BVM-D24E1WU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Balcar BVM-D24E1WU.
However, one of the most important roles played by the user manual is to help in solving problems with Balcar BVM-D24E1WU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Balcar BVM-D24E1WU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
