Instruction/ maintenance manual of the product XR-C5100 Sony
Go to page of 20
1998 by Sony Corporation 3-861-687- 12 (1) Operating Instructions EN FM / AM Cassette Car Ster eo XR-C5100 XR-4800 Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below.
2 EN W elcome! Thank you for purchasing the Sony Cassette Car Stereo. This unit lets you enjoy a variety of features by using an optional rotary commander. In addition to the tape playback and the radio operation you can expand your system by connecting an optional MD/CD unit * (XR-C5100 only).
3 EN With Optional Equipment MD/CD Unit (XR-C5100 only) Playing an MD/CD ............................................ 9 Scanning the tracks — Intro scan .................................................. 10 Playing tracks repeatedly — Repeat play .
4 EN Attaching the front panel Attach part A of the front panel to part B of the unit as illustrated and push until it clicks. Notes • Make sure the front panel is right side up when attaching it to the unit as it cannot be attached upside down. • Do not press the front panel too hard when attaching it to the unit.
5 EN Setting the clock The clock has a 12-hour digital indication. For example, setting it to 10:08 1 Press (OFF) or (DSPL) during operation. 2 Press (DSPL) for two seconds. 1 Set the hour digits. 2 Press (SEL) momentarily. 3 Set the minute digits. 3 Press (DSPL) momentarily.
6 EN SEEK AMS To locate the succeeding tracks To locate the preceding tracks Switching to the radio while fast- winding a tape — Automatic Tuner Activation (ATA) Press (5) during playback. “ATA” appears on the display. When fast-forwarding or rewinding with (SEEK/AMS) for two seconds, the tuner will turn on automatically.
7 EN Cassette Player/Radio Memorizing only the desired stations Up to 6 stations on each band (FM1, FM2, FM3, AM1 and AM2) can be stored on the preset number buttons in the order of your choice.
8 EN Changing the displayed items Each time you press (DSPL) , the display changes between the frequency and the clock. If you cannot tune in a preset station Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning). Scanning stops when a station is received.
9 EN Radio/Other Functions/MD/CD Unit Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2 or 3). “D-BASS” * appears in the display. To cancel, turn the control to the OFF position. Note If the bass sound becomes distorted, adjust the D-BASS control or the volume button.
10 EN Locating a specific point in a track — Manual search During playback, press and hold either side of (SEEK/AMS) . Release the button when you have found the desired part. Switching to other discs During playback, press either side of (PRESET/DISC) .
11 EN MD/CD Unit/Additional Information Additional Information Precautions • If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. • If no power is being supplied to the unit, check the connections first.
12 EN Dismounting the unit 1 2 3 4 Release key (supplied) The r otary commander labels You can control this unit with the optional rotary commander (RM-X4S). Some labels are supplied with the rotary commander. Attach that label that matches the functions of the master unit and the mounting position of the rotary commander.
13 EN Location of controls Refer to the pages for further details. 1 SEEK/AMS button 5, 6, 7, 8, 9, 10 2 SOURCE button (TAPE/TUNER/MD * /CD * ) 5, 7, 9 3 (+)(–) (volume/bass/treble/left-right/ front.
14 EN Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 4800: 13␣ W/C5100: 17 W per channel minimum continuous average power into 4␣ ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 1% total harmonic distortion.
15 EN T roubleshooting guide The following checklist will assist in the correction of most problems you may encounter with your unit. Before going through the checklist below, refer to the operating procedures. General Cause/Solution • Adjust the volume with (+) .
16 EN Error displays (XR-C5100 only) (when the optional MD/CD unit(s) is connected) The following indications will flash for about five seconds and an alarm sound will be heard. Display Cause The disc magazine is not inserted in the MD/CD unit. No disc is inserted in the disc magazine.
17 EN Index Additional Information R Radio 7 Repeat play 6, 10 Reset 4 Rewind 5 Rotary commander 12 S Shuffle play 10 T, U, V, W, X, Y, Z Tape playback 5 TRE (treble) 8 A ATT 8 Automatic Music Sensor .
18 EN.
19 EN.
Sony Corporation Printed in Thailand.
An important point after buying a device Sony XR-C5100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony XR-C5100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony XR-C5100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony XR-C5100 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony XR-C5100 will certainly help you make a decision on the purchase.
If you already are a holder of Sony XR-C5100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony XR-C5100.
However, one of the most important roles played by the user manual is to help in solving problems with Sony XR-C5100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony XR-C5100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
