Instruction/ maintenance manual of the product XCD-V60 Sony
Go to page of 30
SER VICE MANUAL 1st Edition COLOR DIGITAL CAMERA MODULE XCD-U100CR XCD-SX90CR XCD-V60CR B/W DIGITAL CAMERA MODULE XCD-U100 XCD-SX90 XCD-V60.
XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Table of Contents 3. Circuit Description 3-1. BI-217, BI-218, and BI-219 Boards ............................... 3-1 3-2. FM-96 Board .................................................................. 3-1 3-3.
.
3 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Manual Structure Purpose of this manual This manual is the Service Manual of the B/W Digital Camera Module XCD-U100/ SX90/V60 and Color Digital Camera Module XCD-U100CR/SX90CR/V60CR. This manual contains the service overview, adjustment, circuit description, spare parts, block diagrams, and frame wiring.
.
1-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Section 1 Service Overview 1-1. Board Location Board name Model name BI-217 board XCD-V60 XCD-V60CR BI-218 board XCD-SX90 XCD-SX90CR BI-219 board XCD-U100.
1-2 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-2-2. Rear Panel Assembly 1. Remove the upper case and lower case. (Refer to Section 1-2-1.) 2. Remove the two screws, then pull out the rear panel assembly. 3. Disconnect the flexible flat cable from the connector (CN900) on the CN-3020 board.
1-3 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-3. Removing/Installing the Board 1-3-1. BI-217/218/219 Board 1. Remove the upper case and lower case. (Refer to Section 1-2-1.) 2. Remove the front panel assembly. (Refer to Section 1-2-3.) 3. Remove the two screws.
1-4 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-3-3. DC-DC Converter 1. Remove the upper case and lower case. (Refer to Section 1-2-1.) 2. Remove the rear panel assembly. (Refer to Section 1-2-2.) 3. Remove the front panel assembly. (Refer to Section 1-2-3.
1-5 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-3-5. CN-3020 Board 1. Remove the upper case and lower case. (Refer to Section 1-2-1.) 2. Remove the rear panel assembly. (Refer to Section 1-2-2.) 3. Remove the twelve solders of the connector from the CN-3020 board.
1-6 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-4. Lens Mount Cap, Filter Bracket, Optical Dust Cover (XCD-V60/SX90/ U100), Infrared Cut Filter (XCD-V60CR/SX90CR/U100CR), Sealing Rubber Spacers Spacers Optical dust cov er XCD-V60/SX90/U100 XCD-V60CR/SX90CR/U100CR Filter brack et Lens mount cap Lens mount cap PM2 x 4 M1.
1-7 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-5. Round Type Connector (12-Pin) 1. Remove the upper case and lower case. (Refer to Section 1-2-1.) 2. Remove the rear panel assembly. (Refer to Section 1-2-2.) 3. Remove the CN-3020 board. (Refer to Section 1-3-5.
1-8 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 1-8. Unleaded Solder Boards requiring use of unleaded solder are printed with a lead free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.
2-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Section 2 Adjustment Camera IEEE1394b cable IEEE1394b P ersonal computer 2-1. Writing of Serial Number and Node Unique ID n Perform the writing when replacing the FM-96 board or front panel assembly. Required equipment .
2-2 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 5. Click the “ Flash ” tab. 6. Click the [Restart|the|Camera] button to restart. 7. Check if the serial number and Node Unique ID on the model nameplate correspond to each number in the IIDC control window.
2-3 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR WFM xxxxxxxx xxxxxxxx xx Exposure tab 2-2-1. Black and White (B/W) Camera (XCD-U100/SX90/V60) 1. Shoot the pattern box in the center of the window through the clear chart at the wide end. 2. Start the IIDC_CAM **** software.
2-4 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 7. Click the “ Adjust ” tab in the IIDC control window. 8. Click the [AdjustWB] button to adjust the color. 9. Click the [Gain0dB] button. The Gain 0dB adjustment is performed. 10. Check that the adjustment level satisfies the specifica- tion A.
3-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Section 3 Circuit Description 3-1. BI-217, BI-218, and BI-219 Boards These boards consist of CCD (IC101) and ADC (BI-217: IC105), BI-218: IC102), and BI-219: IC105) that are used for VGA color/black & white (BI-217), SXGA color/black & white (BI-218), and UXGA color/black & white (BI- 219).
.
4-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 4-1. Notes on Repair Parts 1. Safety Related Components Warning w Components marked ! are critical to safe operation. Therefore, specified parts should be used in the case of replacement. 2. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit.
4-2 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Overall Block 4-2. Exploded Views A C A XCD-V60 XCD-SX90 XCD-U100 E F C D H G E F B F900 F800 B H D G XCD-V60CR XCD-SX90CR XCD-U100CR 3 24 11 22 7 10 25 2.
4-3 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Overall Block No. Part No. SP Description 1 A-1441-025-A s MOUNTED CIRCUIT BOARD, BI-217 (FOR XCD-V60/V60CR) A-1441-026-A s MOUNTED CIRCUIT BOARD, BI-218 .
4-4 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR 4-3. Packing Materials & Supplied Accessories ---------------------------------------- PACKING MATERIALS & SUPPLIED ACCESSORIES ---------------------------------------- Ref. No. or Q'ty Part No.
5-1 5-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Overall Overall Section 5 Block Diagram Overall IC102 (BI-218 BOARD) IC105 (BI-217/219 BOARD) 18 4 6 6 6 DOUT0N DOUT0P DOUT1N DOUT1P CLK_P CLK_N V_TO1.
.
6-1 6-1 XCD-U100/SX90/V60 XCD-U100CR/SX90CR/V60CR Section 6 Frame Wiring Frame Wiring Frame Wiring Frame Wiring BI-217 (XCD-V60/V60CR) BI-218 (XCD-SX90/SX90CR) BI-219 (XCD-U100/U100CR) CN101 FLEXIBLE .
.
.
Printed in Japan Sony Corporation 2007. 12 22 ©2007 XCD-U100 (SY) XCD-U100CR (SY) XCD-SX90 (SY) XCD-SX90CR (SY) XCD-V60 (SY) XCD-V60CR (SY) E 9-968-402-01.
An important point after buying a device Sony XCD-V60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony XCD-V60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony XCD-V60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony XCD-V60 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony XCD-V60 will certainly help you make a decision on the purchase.
If you already are a holder of Sony XCD-V60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony XCD-V60.
However, one of the most important roles played by the user manual is to help in solving problems with Sony XCD-V60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony XCD-V60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
