Instruction/ maintenance manual of the product G7 G247HYU Acer
Go to page of 31
User Guide Acer LCD Monitor.
Changes may be made peri odically to the informati on in this publication without obl igation to notify any person of s uch revisions or change s. Such changes will be incorporated in n ew e diti ons of th is manual or supple me n tar y do cu ments and pub lications.
iii Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. • Due to the nature of the fluorescent light, the screen may flicker during initial use.
iv Accessibility Be sure that the po we r outle t you plug the p ower cord into is easily accessible and located as close to the equipmen t operator as possible. When you need to disconnect power from the equipment , be sur e to unplug the power cord from the electrical outlet.
v ampere rating of the equipment plugge d into the extension cord does not exceed the extension cord ampere rating. Also, make sure that th e total rating of all products plugg ed into the wall outlet does not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in too many devices.
vi Note: Adjust only those controls that are covered by the operating instructions, since improper adju stm e nt of ot her controls may result in damage and will often require extensive work by a qualified technician to restore the produc t to normal condition.
vii Nevertheless, some pixels may occasion ally misfire or appear as black or red dots. This has no effect on the re corded image and do es not constitute a malfunction. This product has been shipped en abled for power management: • Activate display’s Sleep mode with in 15 minutes of user inactivity.
viii Taking care of your vision Long viewing hours, wearing in correct glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The fo llowing sections provide suggestions on how to reduce eyestrain.
TABLE OF CONTENTS UNPACKING ............................................... ............................................. 1 ATTACHING / REMOVING THE BASE .................................................. ... 2 SCREEN POSITION ADJUSTMENT .............
EN-1 UNPACKING Please check the foll owing items are present when you unpack the box, and save the packing material s in case yo u will need to ship or transport the monitor in future.
EN-2 ATTACHING / REMOVING THE BASE SCREEN POSITION ADJUSTMENT In order to o ptimize the best viewing pos ition, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adju sted to 15 degrees up or 5 de grees down as indicated by arrow below.
EN-3 CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supp ly that allows operation in either 100/120V AC or 220/240 V AC voltage area.
EN-4 POWER SAVING The monitor will be driven into “Power Saving” mode by the con trol signal from the display controller, as indi cated by the amber-color p ower LED. The power saving states will be kept until a contr ol signal has been detected or the keyboard or mouse is activate d.
EN-5 CONNECTOR PIN ASSIGNMENT 24-Pin Color Display Signal Cable* * only for certain models PIN Meaning PIN Meaning 1. TMDS Data2- 13. NC 2. TMDS Data2+ 14. +5V Power 3. TMDS Data 2 /4 Shield 15. Logic Ground 4. NC 16. Hot Plug Detect 5. NC 17. TMDS Data0- 6.
EN-6 19-Pin Color Display S ignal Cable* * only for certain models 19-Pin Color Display Signal Cable* * only for MHL models PIN Meaning PIN Meaning 1. TMDS Data2+ 10. TMDS Clock+ 2. TMDS Data2 Shi eld 11. TMDS Clock Shield 3. TMDS Data2- 12. TMDS Clock- 4.
EN-7 20-Pin Color Display S ignal Cable* * only for certain models PIN Description PIN Description 1. Lane0(p) 11. GND 2. GND 12. Lane3(n) 3. Lane0(n) 13. Config1 4. Lane1(p) 14. Config2 5. GND 15. AUX_CH (n) 6. Lane1(n) 16. GND 7. Lane2(p) 17. AUX_CH (p) 8.
EN-8 STANDARD TIMING TABLE Mode Resolution 1 VGA 640 x 480 60 Hz 2 VGA 640 x 480 72 Hz 3 VGA 640 x 480 75 Hz 4 MAC 640 x 480 66.66 Hz 5 VESA 720 x 400 70 Hz 6 SVGA 800 x 600 56 Hz 7 SVGA 800 x 600 60 Hz 8 SVGA 800 x 600 72 Hz 9 SVGA 800 x 600 75 Hz 10 MAC 832 x 624 74.
EN-9 * Only for MHL models Mode Resolution 1 640 x 480 @60Hz 2 720 x 480p @60Hz 3 720 x 576p @50Hz 4 800 x 600 @60Hz 5 1024 x 768 @60Hz 6 1280 x 720p @60Hz 7 1280 x 720p @50Hz 8 1920 x 1080i @60Hz 9 1.
EN-10 INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Digital Cable (Only Dua l-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer ’s port.
EN-11 MHL (Mobile High-Definition Link) (Only for MHL-input Models) Mobile High-Definiti on Link is a digital interface for trans mitting video and audio from an external portable device . It is also capable of charging a portable device (5 V @ 500 mA).
EN-12 USER CONTROLS Base Controls Icon Item Description Power butt on/ indicator To turn the monitor ON or OFF. Lights up to indicate th e power is turned ON. OSD function s Press to view the O SD. Minus / plus If the OSD is active, press the Minus or Plus button to toggle b etween the OSD option s.
EN-13 Acer eColor Management Operation instructions Step 1: Press “ ” Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “ “ or “ ” to select the mode Features and Benefits Main Menu ico n Sub Menu icon Sub Menu item Description N/A User mode User defined.
EN-14 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and ge neral settings. For advanced settings, please refer to following page: Note: The following co ntent is fo r general reference only.
EN-15 Adjusting p icture qualit y 1. Press the MENU key to bring up the OSD. 2. Usin g the / keys, select Picture from the OSD. Then navigate to the picture element yo u wish to adjust. 3. Use the / keys to ad just the sliding scales. 4.
EN-16 Adjusting OSD settings 1. Press the MENU key to bring up the OSD. 2. Using t he directional keys, sel ect OSD from the on screen display. Then navigate to the featur e you wish to adjust.
EN-17 Adjusting miscel laneous settings 1. Press the MENU key to bring up the OSD. 2. Usin g the / keys, select Setting from the OSD, then navigate the setting you want to adjust. 3. The setting menu can be used to adjust the screen Menu Language and other important settings.
EN-18 Product information 1. Press the MENU key to bring up the OSD. 2. Usin g the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for curren t input.
EN-19 TROUBLESH OOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (DVI/HDMI/DP Mode) Problems Current Status Remedy No Picture LED ON Using OSD, adjust bright ness and contrast to maximum or reset to their default settings.
EN-20 Aug. 20, 2014 G247HYU G247HYU.
EN-21 Acer America Corpor ation 333 West San Carlos St., Suite 1500 San Jose, CA 95 110 U. S. A. Tel : 254- 298-4000 Fax : 254- 298-4147 www.acer.com Federal Communications Commission Declaration of Confo rmity This device complies with Part 15 of the F CC Rules.
EN-22 ENERGY STAR ® Acer’s ENERGY STAR qualified products save you money by reducin g energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customer s products with the ENERGY STAR mark.
An important point after buying a device Acer G7 G247HYU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer G7 G247HYU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer G7 G247HYU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer G7 G247HYU you will learn all the available features of the product, as well as information on its operation. The information that you get Acer G7 G247HYU will certainly help you make a decision on the purchase.
If you already are a holder of Acer G7 G247HYU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer G7 G247HYU.
However, one of the most important roles played by the user manual is to help in solving problems with Acer G7 G247HYU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer G7 G247HYU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
