Instruction/ maintenance manual of the product Trinitron CRT Monitor Sony
Go to page of 16
E nglish 8188 ¨¨¨ 1 English TABLE OF CONTENTS SAFETY INSTRUCTIONS .................................................................. 2 INTRODUCTION ............................................................................. 4 Package Contents ...
¨¨¨ 2 English SAFETY INSTRUCTIONS 1. Please read carefully all of these instructions below and keep the manual for later use. 2. Please install the swivel base for this product before using it. 3. The voltage ratings and the rated frequency are on the overlay centered at the rear side of this product.
E nglish 8388 ¨¨¨ 3 English SAFETY INSTRUCTIONS Usually when this product is sold a suitable power cord is provided by the manufacturer. However, this product is sometimes resold or transported to another area with a different power system and safety requirements.
¨¨¨ 4 English Introduction The monitor is a multiple frequency high-resolution color monitor for IBM compatible PC's or Macintosh and workstation systems. The monitor is equipped with microprocessor based intelligence and multiple frequency scanning capability, allowing it to provide maximum compatibility for various system platforms.
E nglish 8588 ¨¨¨ 5 English Installing or Removing the Tilt/Swivel Base 1. Turn off the system and all attached peripherals. 2. Carefully set the monitor upside down. Remove the Tilt/Swivel Base: 1. Squeeze and hold the latches. 2. Pull the tilt/swivel base to the rear of the monitor and lift to remove the base.
¨¨¨ 6 English INTRODUCTION Specifications Note: Specifications are subject to change without notice. Color Picture Tube 43.1 cm / 17" (16" viewable screen size) diagonal measurement, 90 degree deflection, Trinitron® CRT, anti-glare, anti-reflection, anti-static AG Pitch 0.
E nglish 8788 ¨¨¨ 7 English Recommended Use of the Monitor When setting up and using the monitor, pay special attention to the following for optimum performance: Do not use your monitor against a bright background or where sunlight or other light sources will shine directly on the screen.
¨¨¨ 8 English CONTROLS AND ADJUSTMENTS Controls and Adjustments Once you have installed the monitor with your system, please read the instructions of this section which give you some guidelines on how to use the monitor more efficiently.
E nglish 8988 ¨¨¨ 9 English D. Color C. Geometry B. Picture A.General CONTROLS AND ADJUSTMENTS a. Press " 4 " to select Brightness or Contrast. b. Press "+" or "" to preferred picture. a. Press " 4 " to select Vertical and Horizontal position, Vertical and Horizontal size.
¨¨¨ 10 English CONTROLS AND ADJUSTMENTS F. Property F-1. Status F-2. Recall E. Advance a. Press " 4 " to select Moire or Degauss. b. Press "+" to proceed. c. Press "+" or "" to preferred picture. Press " 4 " to select Status, Recall or Language sub- manual.
E nglish 81188 ¨¨¨ 11 English NU T E K VES A state LED in dicator Pow er Cons umption Normal operation On Gr een < 110W Powe r Sav in g Pos itio n A 1 Su spe nd Ambe r ≤ 15W Powe r Sav in g Pos itio n A 2 Off Amb er ≤ 5W CONTROLS AND ADJUSTMENTS F-3.
¨¨¨ 12 English Compatibility This color monitor supports multiple operating platforms such as IBM compatible and Macintosh family computers. This section provides you with detailed information on the pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards.
E nglish 81388 ¨¨¨ 13 English TECHNICAL INFORMATION HORIZONTAL Preset Timing Chart Note:This monitor is equipped with a micro-processor which allows the user to set his own preferred mode(s) beyond those standard mode listed below. VERTICAL * Bµs (Pulse Width) should be more than 0.
¨¨¨ 14 English Troubleshooting Before calling an authorized service center please check that the items below are properly connected or set. In case of using a non-standard signal, please check the .
E nglish 81588 ¨¨¨ 15 English DIMENSIONS unit: mm.
¨¨¨ 16 English Capability P L U G & P L A Y Notice : This monitor is equipped with Plug & Play capability(VESA DDC 1/ 2B). To utilize this capability, your graphic card and hosting system have to be Plug & Play compatible as well.
An important point after buying a device Sony Trinitron CRT Monitor (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony Trinitron CRT Monitor yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony Trinitron CRT Monitor - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony Trinitron CRT Monitor you will learn all the available features of the product, as well as information on its operation. The information that you get Sony Trinitron CRT Monitor will certainly help you make a decision on the purchase.
If you already are a holder of Sony Trinitron CRT Monitor, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony Trinitron CRT Monitor.
However, one of the most important roles played by the user manual is to help in solving problems with Sony Trinitron CRT Monitor. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony Trinitron CRT Monitor along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
