Instruction/ maintenance manual of the product TA-N9000ES Sony
Go to page of 32
3-864-981- 12 (1) 5 Channel Power Amplifier 1998 by Sony Corporation T A-N9000ES Operating Instructions Mode d’emploi US FR.
2 US W ARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 US US T ABLE OF CONTENTS Hooking Up the Components 4 Unpacking 4 Normal Connections Using One Power Amplifier 6 Normal Connections Using T wo Power Amplifiers 7 If Y ou Already Have an Integrated St.
4 US Hooking Up the Components This chapter describes how to connect a Sony T A-E9000ES control amplifier , your speakers, and your other audio components to the power amplifier .
5 US Hooking Up the Components Notes on speaker system hookup • T wist the stripped ends of the speaker cords about 10 mm. • Connect the right fr ont and rear speakers to the FRONT and REAR SPEAKERS “R” terminals, connect the left front and r ear speakers to the FRONT and REAR SPEAKERS “L” terminals.
6 US Hooking Up the Components } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 RF.
7 US Hooking Up the Components } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 RF.
8 US Hooking Up the Components } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 RF.
9 US Hooking Up the Components PRE OUT FRONT REAR WOOFER CENTER AUDIO L R LL R R OUTPUT FRONT REAR CENTER WOOFER LL R R BYPASS INPUT FRONT REAR CENTER WOOFER FRONT SPEAKERS INPUT S-LINK OPERATION REAR.
10 US Hooking Up the Components } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 R.
11 US Hooking Up the Components Contr ol A1 Connections Use a CONTROL A1 cor d (supplied) to connect the S- LINK CTRL A1 jack on this unit to the S-LINK CTRL A1 jack on the T A-E9000ES A V Control Amplifier . When the T A-E9000ES A V Control Amplifier is set to standby mode, this unit will also switch to standby mode.
12 US Fr ont Panel Parts Description Location of P arts and Basic Oper ations This chapter explain the names and basic operations of the buttons and controls located on the fr ont panel.
13 US Location of Parts and Basic Operations 1 2 3 STANDBY OPERATION WARM UP EXTRA 2ch / BTL EXTRA 2ch 5ch / BTL 2+1 ch 4ch / BTL 2ch 3ch 2ch BTL 2ch BTL 2+1ch BTL EXTRA 2ch 5ch WARM UP EXTRA 2ch 4ch 3ch 2ch U 2 Operation indicators Light to indicate the operation mode selected with the OPERA TION control.
14 US Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the power amplifier and have it checked by qualified personnel before operating it any further . On power sources • Before operating the power amplifier , check that the operating voltage is identical with your local power supply .
15 US Additional Information T roubleshooting If you experience any of the following difficulties while using the power amplifier , use this troubleshooting guide to help you remedy the pr oblem. Should any problem persist, consult your nearest Sony dealer .
16 US Additional Information Specifications AUDIO POWER SPECIFICA TIONS POWER OUTPUT AND TOT AL HARMONIC DISTOR TION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 120 watts per channel minimum RMS power , with no more than 0.03% total harmonic distortion from 250 milliwatts to rated output (USA model only).
17 US Additional Information.
2 FR A VER TISSEMENT Afin d’éviter tout risque d’incendie ou d’électr ocution, ne pas exposer cet appar eil à la pluie ou à l’humidité. Afin d’éviter tout risque de choc électrique, ne pas ouvrir le coffr et. Confier toute réparation à un technicien qualifié uniquement.
3 FR FR T ABLE DES MATIÈRES Raccordement des appar eils 4 Déballage 4 Raccordement or dinair e à un seul amplificateur 6 Raccordement or dinair e à deux amplificateurs 7 Si vous avez déjà un amp.
4 FR Déballage Vérifiez si l’accessoire suivant se tr ouve dans l’emballage: • Câble CONTROL A1 (1) A vant de commencer • Mettez tous les appareils hors tension avant d’ef fectuer les liaisons. • Ne raccordez les cor dons d’alimentation secteur que lorsque toutes les liaisons sont terminées.
5 FR Raccordement des appar eils Remarques sur le raccor dement du système acoustique • T orsadez chaque extrémité dénudée des cordons d’enceinte sur 10 mm environ.
6 FR Raccordement des appar eils } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 .
7 FR Raccordement des appar eils } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 .
8 FR Raccordement des appar eils } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3 .
9 FR Raccordement des appar eils PRE OUT FRONT REAR WOOFER CENTER AUDIO L R LL R R OUTPUT FRONT REAR CENTER WOOFER LL R R BYPASS INPUT FRONT REAR CENTER WOOFER FRONT SPEAKERS INPUT S-LINK OPERATION RE.
10 FR Raccordement des appar eils } ] } ] } ] } ] } ] AC OUTLET PHONO TUNER CD MD/DAT TAPE DVD LD VIDEO 3 VIDEO 2 VIDEO 1 PRE OUT S-LINK RS-232C LD DVD TV/DBS MD/DAT CD MONITOR LD ANALIZER MIC IN AC-3.
11 FR Raccordement des appar eils Raccor dement CONTROL A1 Utilisez un cordon CONTROL A1 (fourni) pour relier la prise S-LINK CTRL A1 de cet appareil à la prise S-LINK CTRL A1 de l’amplificateur de contrôle A V T A-E9000ES. Lorsque l’amplificateur de contrôle A V T A-E9000ES sera mis en veille, cet appar eil le sera aussi.
12 FR Description des éléments du panneau avant 1 Commutateur U Sert à mettre l’amplificateur sous et hors tension. Témoin ST ANDBY (veille) Clignote momentanément lorsque vous appuyez sur U pour mettre l’amplificateur sous tension et s’éteint pour indiquer que l’appareil est prêt.
13 FR Emplacement des éléments et opérations de base 1 2 3 STANDBY OPERATION WARM UP EXTRA 2ch / BTL EXTRA 2ch 5ch / BTL 2+1 ch 4ch / BTL 2ch 3ch 2ch BTL 2ch BTL 2+1ch BTL EXTRA 2ch 5ch WARM UP EXTRA 2ch 4ch 3ch 2ch U 2 Témoins de fonctionnement S’allument pour indiquer le mode de fonctionnement sélectionné avec la commande OPERA TION.
14 FR Informations complémentair es Précautions Sécurité Si un solide ou un liquide pénètre dans le cof fr et, débranchez l’amplificateur de puissance et faites-le vérifier par un professionnel avant de le r emettre en service.
15 FR Informations complémentaires Guide de dépannage Si vous rencontr ez un des pr oblèmes suivants lorsque vous utilisez l’amplificateur de puissance, r eportez-vous à ce guide de dépannage pour essayer de le résoudre. Si vous n’y parvenez pas, consultez votre r evendeur Sony .
16 FR Informations complémentaires Spécifications Section Amplificateur PUISSANCE DE SORTIE Mode NORMAL (4/8 ohms 20 Hz ~ 20 kHz, DHT 0,013 %) A vant: 1 15 W + 1 15 W Centre: 1 15 W Arrière: 1 15 W.
An important point after buying a device Sony TA-N9000ES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony TA-N9000ES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony TA-N9000ES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony TA-N9000ES you will learn all the available features of the product, as well as information on its operation. The information that you get Sony TA-N9000ES will certainly help you make a decision on the purchase.
If you already are a holder of Sony TA-N9000ES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony TA-N9000ES.
However, one of the most important roles played by the user manual is to help in solving problems with Sony TA-N9000ES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony TA-N9000ES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
