Instruction/ maintenance manual of the product STR-DN1060/STR-DN860 Sony
Go to page of 232
MULTI CHANNEL AV RECEIVER STR- DN1060/STR - DN860 Parts and Controls Receiver (STR - DN1060) Front panel (STR - DN1060) (upper section) [1] Front panel (STR - DN1060) (lower section) [2] On/standby in.
2. Connecting speakers Connecting speakers [17] Connecting the speakers in Zone 2 and/or Zone 3 (for STR- DN1060 only) [18] Bi - amplifier connections [19] 3. Connecting a TV Connecting a TV (for STR- DN1060) [20] Connecting a TV (for STR- DN860) [21] Connecting a 4K TV [22] Notes on connecting cables [23] About HDMI connections [24] 4.
connections only) [39] 6. Turning on the receiver/preparing the remote control Inserting batteries into the remote control [40] Turning on the receiver [41] 7. Setting up the receiver using Easy Setup Setting up the receiver using Easy Setup [42] Tips for automatic calibration (Auto Calibration) 1.
Playing content from a USB device Enjoying content stored on a USB device [59] USB specifications and Compatible USB devices [60] Notes on USB devices [61] Listening to the radio Listening to FM radio.
Connecting the receiver to the network using a LAN cable (for wired LAN connections only) [75] Setting up a wired LAN connection [76] Setting up a wireless LAN connection (for wireless LAN connections.
Checking the registered TV SideView device (Registered Remote Devices) [88] Deleting TV SideView device from device list [89] Using Google Cast™ to enjoy audio content from a smartphone or tablet de.
Controlling the receiver using a smartphone or tablet device (SongPal) [101] Listening to the same music on multiple devices/Listening to different music in a different location (SongPal Link) [102] U.
Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) What is “BRAVIA” Sync ? [116] Preparing for “BRAVIA” Sync [117] Enjoying an input source from a connected.
Adjusting Settings Easy Setup Setting up the receiver using Easy Setup [134] Speaker Settings 1. About Auto Calibration [135] 2. Before you perform Auto Calibration [136] 3. Connecting the optimizer microphone [137] 4. Selecting the front speakers [138] 5.
Selecting the HD - D.C.S. effect type ( HD - D.C.S. Type ) [157] Enjoying more natural sound with speakers installed in the ceiling ( In - Ceiling Speaker Mode ) [158] Enjoying high - fidelity sound (.
Input Settings Changing the assignment and display for the input jacks [181] Changing the name for each input ( Name ) [182] Network Settings Setting up a wired LAN connection [183] Setting up a wirel.
Selecting source signals for Zone 2/Zone 3/HDMI zone ( Input ) (for STR- DN1060 only) [200] Adjusting the volume for Zone 2/Zone 3 ( Volume ) (for STR- DN1060 only) [201] Setting the volume control fo.
PROTECTOR [219] An over - current from the USB port was detected. [220] List of messages after Auto Calibration measurements [221] General The receiver is turned off automatically. [222] Cannot find an available input when connecting several digital devices.
The FM reception is poor. [241] The FM stereo reception is poor. [242] You cannot tune to radio stations. [243] RDS does not work (for European and Asia - Pacific models only). [244] The RDS information that you want does not appear (for European and Asia - Pacific models only).
A server does not appear in the server list. ([ Cannot find the server.] appears on the TV screen.) [264] Playback does not start, or the player does not automatically proceed to the next track or file. [265] The sound skips during playback. [266] [ No playable file in this category.
No image from an MHL- compatible source device. [286] Remote control The remote control does not function. [287] If the problem is not solved Reverting to the factory default settings [288] Resetting .
Operates the BLUETOOTH function. 5 . TUNER PRESET +/– 6 . NFC sensor 7 . A.F.D./2CH , MOVIE , MUSIC 8 . Display panel 9 . DISPLAY MODE Switches information on the display panel. 10 . ZONE SELECT , ZONE POWER 11 . DIMMER Adjusts the brightness of the display panel in 3 levels.
[3] Parts and Controls Receiver (STR - DN1060) On/standby indicator (STR - DN1060) Green: The receiver is turned on. Amber: The receiver is in standby mode, and: [ Control for HDMI], [ Remote Start ], [ Bluetooth Standby ] (*) or [Quick Start/Network Standby ] (**) is set to [ On ].
2 . S.OPTIMIZER Lights up when the Sound Optimizer function is activated. 3 . D.C.A.C. Lights up when the measurement results of the Auto Calibration function are applied. 4 . Dolby Digital Surround indicator The applicable indicator lights up when the receiver is decoding the corresponding Dolby Digital format signals.
18 . Wireless LAN signal strength indicator Lights up to show the strength of the wireless LAN signal. : No signal. : Weak signal. : Moderate signal. : Strong signal. 19 . BT Lights up when a BLUETOOTH device is connected. Flashes while connecting. 20 .
9 . AUDIO IN jacks 10 . VIDEO IN/OUT (*) jacks 11 . COMPONENT VIDEO IN/OUT (*) jacks 12 . FM ANTENNA terminal 13 . OPTICAL IN jacks * Connect a TV to the corresponding output jacks to watch video input from these jacks.
Adjusts the brightness of the display panel in 3 levels. 13 . Remote control sensor Receives signals from remote control. 14 . PURE DIRECT The indicator above the button lights up when the Pure Direct function is activated. [7] Parts and Controls Receiver (STR - DN860) Front panel (STR -DN860) (lower section) 1 .
Through ], [ Remote Start], [ Bluetooth Standby ] (*) and [ Quick Start/Network Standby ] (**) are set to [ Off ]. * When [ Bluetooth Standby ] is activated, the indicator only lights in amber when a device has been paired with the receiver.
DTS- HD : DTS- HD 6 . Speaker system indicator 7 . Tuning indicator ST Lights up when the receiver tunes to a stereo broadcast. 8 . HDMI OUT A + B (for STR- DN1060 only) 9 . SLEEP Lights up when the sleep timer is activated. 10 . EQ Lights up when the equalizer is activated.
[10] Parts and Controls Receiver (STR - DN860) Rear panel (STR- DN860) 1 . COAXIAL IN jack 2 . HDMI IN/OUT (*) jacks 3 . Wireless LAN antenna 4 . LAN port 5 . SPEAKERS terminals 6 . SUBWOOFER OUT jacks 7 . AUDIO IN jacks 8 . VIDEO IN/OUT (*) jacks 9 .
1 . (on/standby) Turns the receiver on or sets it to the standby mode. Saving power in standby mode Save power by setting the receiver as follows: Set [ Control for HDMI ], [ Remote Start], [ Bluetooth Standby ] and [ Quick Start/Network Standby ] (*) to [ Off ].
6 . WATCH , LISTEN Select [ Watch ] or [ Listen ] on the home menu directly. When pressing these buttons on the Watch or Listen screen, you can move the focus to select the desired input. 7 . CUSTOM PRESET (1, 2, 3) Saves and recalls various settings for the receiver.
Displays the menu to operate the receiver. 2 . , /// Press / / / to select the menu items. Then press to enter the selection. 3 . OPTIONS Display and select items from the options menus. 4 . HOME Displays the home menu on the TV screen. 5 . / , (*), Skip, play, pause, stop operation.
Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Surround back speaker (Left) Surround back speaker (Right) Subwoofer When using a 6.1 - channel connection The following illustration is an example of an arrangement with only one surround back speaker.
Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [14] Preparation 1. Installing speakers Installing 7.1 - channel speaker system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers.
Front high speaker (Right) Subwoofer 1 . Place the front high speakers at an angle between 25° and 35°. 2 . Place the front high speakers at height angle of 20° ± 5°. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want.
Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want.
Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want.
Front speaker (Left) Front speaker (Right) Center speaker Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Zone 3 speaker (Left) Zone 3 speaker (Right) [17] Preparation 2. Connecting speakers Connecting speakers Connect each speaker as illustrated below.
Monaural audio cable (not supplied) Speaker cable (not supplied) * If you connect a subwoofer with an auto standby function, turn off this function when watching movies. If the auto standby function is turned on, it switches to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output.
[18] Preparation 2. Connecting speakers Connecting the speakers in Zone 2 and/or Zone 3 (for STR- DN1060 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, it is possible to play a CD in Zone 2 while playing a DVD in the main zone.
Connecting the speakers in Zone 3 Speakers Speaker cable (not supplied) Note When using this Zone 3 connection, you need to set up the SPEAKERS SURROUND/ZONE 3 terminals.
Speaker cable (not supplied) Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/BI - AMP/FRONT HIGH/FRONT B terminals.
Optical digital cable (not supplied) Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI- authorized cable or HDMI cable made by Sony.
Sony recommends that you use an HDMI- authorized cable or HDMI cable made by Sony. Note For this connection, you need to turn the Control for HDMI function on. Press HOME to display the home menu, select [ Setup ] - [ HDMI Settings], and set [ Control for HDMI] to [ On ].
Component video cable (not supplied) Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT A (TV) , HDMI OUT B/HDMI ZONE or MONITOR OUT jack on the receiver.
[21] Preparation 3. Connecting a TV Connecting a TV (for STR- DN860) Connect a TV to the HDMI TV OUT or MONITOR OUT jack. You can operate this receiver using the menu on the TV screen when you connect the TV to the HDMI TV OUT jack. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the receiver while the receiver sends audio and video to the TV.
Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
High- bandwidth Digital Content Protection System Revision 2.2 (HDCP 2.2). To watch HDCP 2.2 protected content such as 4K content, connect these HDMI jacks to jacks that support HDCP 2.2 on the TV and player. For details on whether the TV and player are equipped with HDCP 2.
Optical digital cable (not supplied) HDMI cable (not supplied) [23] Preparation 3. Connecting a TV Notes on connecting cables Be sure to disconnect the AC power cord (mains lead) before connecting cables. It is not necessary to connect all of the cables.
separate audio cables or digital connecting cables, then reassign the input jacks if the sound is not output correctly. When connecting optical digital cables, insert the plugs straight until they click into place. Do not bend or tie optical digital cables.
Note Depending on the TV or video device, 4K or 3D images may not be displayed. Check the HDMI video formats supported by the receiver. Refer to the operating instructions of each connected device for details.
Super Audio CD player, CD player Blu- ray Disc player, DVD player DVD recorder Game console such as PlayStation4 Cable box or satellite box Hint This HDMI connection is an example. You can connect each HDMI device to any HDMI input, including the HDMI input on the front panel.
HDMI cable (not supplied) Sony recommends that you use an HDMI- authorized cable or HDMI cable made by Sony. Super Audio CD player, CD player Blu- ray Disc player, DVD player DVD recorder Game console such as PlayStation4 Cable box or satellite box Hint This HDMI connection is an example.
Connect devices to the receiver as illustrated below. Solid lines show recommended connections and the dashed lines show alternative connections. It is not necessary to connect all the cables. Be sure to disconnect the AC power cord (mains lead) before connecting cables.
The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. [28] Preparation 4. Connecting audio - visual devices and the antennas (aerials) Connecting devices with jacks other than HDMI jacks (for STR- DN860) Connect devices to the receiver as illustrated below.
Optical digital cable (not supplied) Audio cable (not supplied) Video cable (not supplied) Coaxial digital cable (not supplied) Hint You can rename each input so that the name can be displayed on the display panel of the receiver. For details, see “ Changing the name for each input ( Name ) .
Front (for STR- DN1060 only) The HDMI/MHL (VIDEO 2 IN) jack supports MHL 2 technology. Rear The HDMI IN SAT/CATV (MHL) jack supports MHL 3 technology. Mobile device MHL cable (not supplied) We recommend using an MHL 3- compatible cable to connect a mobile device that supports 4K output.
FM wire antenna (aerial) (supplied) Note Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Connecting another amplifier or TV in the HDMI zone (for STR- DN1060 only) HDMI input video/audio signals are output in HDMI zone using the HDMI OUT B/HDMI ZONE jack of the receiver. Speakers TV Amplifier/receiver HDMI cable (not supplied) Note To use this connection, set [ HDMI Out B Mode ] in the HDMI Settings menu to [ Zone ].
Dolby Digital Plus [ DOLBY D + ] (*1) Maximum number of channels: 7.1 Connection with the receiver: HDMI (*2) Dolby TrueHD [ DOLBY HD ] (*1) Maximum number of channels: 7.1 Connection with the receiver: HDMI (*4) DTS [ DTS] Maximum number of channels: 5.
[35] Preparation 4. Connecting audio - visual devices and the antennas (aerials) Notes on connecting cables Be sure to disconnect the AC power cord (mains lead) before connecting cables. It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected device.
Color (Deep Colour), “x.v.Color (x.v.Colour),” and 4K or 3D transmission. To enjoy 3D images, connect a 3D - compatible TV and video device (Blu - ray Disc player, Blu - ray Disc recorder, PlayStation 4, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play 3D - compatible content.
cable (for wired LAN connections only) The following illustration is an example configuration of a home network with the receiver and a server. We recommend that you connect the server to the router with a wired connection. Server (computer, etc.) LAN cable (not supplied) Router Modem Internet [39] Preparation 5.
Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance.
Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause a malfunction. If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
After you turn off the receiver, [ STANDBY ] flashes on the display panel. Do not disconnect the AC power cord (mains lead) while [ STANDBY ] is flashing.
** The measurement result may be not utilized, depending on the audio formats. Note The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [ Test Tone ].
Optimizer microphone (supplied) 1 . Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2 . Set up the optimizer microphone. Place the optimizer microphone where you will sit and set it at the same height as your ears. [46] Preparation Tips for automatic calibration (Auto Calibration) 4.
HIGH/FRONT B terminals. SP A+B (*) : Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/BI - AMP/FRONT HIGH/FRONT B terminals (parallel connection). (None): [ SPK OFF] appears on the display panel. No audio signals are output from any speaker terminals.
If an error code or warning message appears on the screen in step 3, see “ List of messages after Auto Calibration measurements .” This setting is not available when headphones are connected. Hint The Auto Calibration function will be canceled if you perform the following during the measurement process: Press .
of messages after Auto Calibration measurements .” Hint The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems.
Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) BLUETOOTH devices Enjoying audio content from an iPhone/iPod or other smartphone You can transmit audio from an iPhone/iPod or other smartphone to the receiver via BLUETOOTH.
You can display the menu of the receiver on the TV screen (*). * For STR- DN1060, this is only possible when the TV is connected to the HDMI OUT A (TV) jack. 1 . Switch the input of the TV to the input to which the receiver is connected. 2 . Press HOME to display the home menu on the TV screen.
Depending on the TV, the home menu may take some time to appear on the TV screen. 3 . Select [ Watch ] or [ Listen ] from the home menu. The menu item list appears on the TV screen. 4 . Select the device you want. 5 . Turn on the device and start playback.
Enjoying sound of an ARC (Audio Return Channel) compatible TV If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the sound of the TV from the speakers connected to the receiver. 1 . Select [ Setup ] - [ HDMI Settings] from the home menu.
USB port You can enjoy music from an iPhone/iPod by connecting it to the (USB) port on the receiver. 1 . Select [ Watch ] or [ Listen ] - [ USB ] from the home menu. When the iPhone/iPod is connected, a list of its contents appears on the TV screen. You can operate the iPhone/iPod using the remote control of the receiver.
PC iPhone/iPad/iPod 1 . Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2 . Select [ STR- DN1060 XXXXXX ] (*) or [ STR- DN860 XXXXXX ] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3 . Start playing back audio content on an iPhone/iPad/iPod or in iTunes.
BLUETOOTH function. [ PAIRING ] flashes on the display panel. Perform step 3 within five minutes, otherwise pairing will be canceled. If pairing is canceled, repeat this step. 3 . Perform pairing on the BLUETOOTH device to detect this receiver. For details, refer to the operating instructions of your BLUETOOTH device.
Compatible iPhone/iPad/iPod models You can use the following iPhone/iPad/iPod models on this receiver. Update your iPhone/iPad/iPod with the latest software before using it.
You cannot transfer songs onto the iPhone/iPad/iPod from the receiver. Do not remove the iPhone/iPad/iPod during operation. To avoid data corruption and damage to the iPhone/iPad/iPod, turn the receiver off when connecting or removing the iPhone/iPad/iPod.
USB specifications and Compatible USB devices File formats playable via USB connection Supported music formats (*1) MP3 (MPEG 1 Audio Layer - 3) (*2): .mp3 AAC/HE - AAC: .m4a, .aac, .mp4 (*3), .3gp (*3) WMA9 Standard: .wma WMA 10 Pro (*4): .wma LPCM (*2): .
PNG: .png (*6) GIF: .gif (*6) *1 Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. *2 The receiver can play “.mka” files. *3 The receiver can only play “.mp4” and “.3gp” audio file formats.
NWZ - B173F/B183F NWZ - F806/F887 NWZ - ZX1 NWZ - A15/A17 NWZ - WS613/WS615 NWZ - M504 MICROVAULT: USM4GL/USM8GL/USM32GL USM4GM USM8GN/USM32GN USM8GQ/USM32GQ/USM64GQ USM32GLX/USM64GLX USM8GR/USM16GR/U.
Creating Library or Creating Database on the USB device has disappeared. [61] Enjoying Video and Sound Playing content from a USB device Notes on USB devices Do not remove a USB device during operation. To avoid data corruption and damage to the USB device, turn the receiver off when connecting or removing a USB device.
The FM screen appears. FM screen You can select and operate each item on the screen by pressing /// and . A: Frequency indication You can tune to a station automatically by pressing / repeatedly ( Auto Tuning). Press to scan from lower to higher frequency stations or press to scan from higher to lower frequency stations.
You can store stations as follows: FM band: FM 1 to FM 30 [64] Enjoying Video and Sound Listening to the radio Naming preset stations (Name Input) 1 . Select [ Listen ] - [ FM TUNER ] from the home menu. 2 . Select the preset number to which you want to assign a name.
2 . Confirm that the frequency indication on the left of the screen is highlighted and press . 3 . Enter the frequency using ///. i . Press / to select a digit. ii . Press / to change the digit. 4 . Press . Note If the tuned frequency is invalid or out of range, [ ---.
Note RDS may not work properly if the station you tuned to does not transmit the RDS signal or if the signal strength is weak. Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Hint You can check the frequency while a Program Service name is displayed by pressing DISPLAY MODE on the receiver repeatedly.
[68] Enjoying Video and Sound Enjoying sound effects Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. 1 . Turn off the receiver. 2 . Hold down MUSIC and press (on/standby) on the receiver.
Note This function does not work in the following cases: [ Analog Direct ] is being used. [ Pure Direct ] is set to [ On ]. [ Bluetooth Mode ] is set to [ Transmitter ].
frequency of the input signals, depending on the audio format. Hint You can also select [ Sound Optimizer ] in [ Sound Effects] from the home menu. [71] Enjoying Video and Sound Enjoying sound effects.
[72] Enjoying Video and Sound Enjoying sound effects Enjoying high - fidelity sound (Pure Direct) You can enjoy higher - fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality.
You can connect the receiver directly with a device that supports Screen mirroring (e.g. a smartphone, or a tablet) and display the screen of the device on your large TV screen. No wireless router (or access point) is required to use this feature. 1 .
You can also enjoy audio services such as internet radio by connecting internet. You can also control this receiver from a smartphone by using the compatible apps. AirPlay This receiver supports AirPlay. You can enjoy audio content from an iPhone/iPad/iPod or your iTunes Library.
Enjoying music services offered on the Internet [75] Using Network Features Setting up a wired LAN connection (for wired LAN connections only) Connecting the receiver to the network using a LAN cable (for wired LAN connections only) The following illustration is an example configuration of a home network with the receiver and a server.
The screen for selecting the IP address acquisition method appears on the TV screen. 4 . Select [ Auto]. The system starts connecting to the network. The confirmation screen appears. 5 . Press / to browse information, and then press . 6 . Select [ Save & Connect ].
Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance.
1 . Select [ Setup ] - [ Network Settings] from the home menu. 2 . Select [ Internet Settings ]. 3 . Select [ Wireless Setup(built - in) ]. 4 . Select [ Wi - Fi Protected Setup (WPS) ]. 5 . Select [ Start]. 6 . Press the WPS button on the access point.
Server (computer, etc.) 1 . Select [ Listen ] - [ Home Network ] from the home menu. A list of available servers appears on the TV screen. If the last selected item (playlist, album, folder, etc.) appears on the TV screen, press BACK to return to the server list.
1 . Select [ Setup ] - [ Network Settings] from the home menu. 2 . Select [ Connection Server Settings]. 3 . Select the server which you want to delete and press OPTIONS . 4 . Select [ Remove ] from the options menu. 5 . Select [ OK ] on the confirmation display.
Compatible iPhone/iPad/iPod models You can use the following iPhone/iPad/iPod models on this receiver. Update your iPhone/iPad/iPod with the latest software before using it.
this receiver via a wireless network. PC iPhone/iPad/iPod 1 . Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2 . Select [ STR- DN1060 XXXXXX ] (*) or [ STR- DN860 XXXXXX ] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3 .
You can listen to music services offered on the Internet with this receiver. To use this function, you need to connect the receiver to the Internet and then follow the guide that is displayed after the following steps. Internet Router 1 . Select [ Listen ] - [ Music Services ] from the home menu.
use the SongPal Link function. 1 . Download the “SongPal” application to your mobile device. 2 . Run “SongPal” and follow the on- screen instructions. 3 . Connect your mobile device to the receiver using the NFC function or by manual operation.
before you use TV SideView for the first time. Search for TV SideView on Google Play or the App Store and download to your mobile device. 1 . Download TV SideView app to your mobile device. 2 . Turn on the receiver and then connect it to the same network as your mobile device.
2 . Select [ Registered Remote Devices]. 3 . Select the device you want to delete and press OPTIONS . 4 . Select [ Remove ] from the options menu. 5 . Select [ OK ].
2 . Select [ Renderer Access Control ]. A list of registered controllers appears (up to 40 devices). 3 . Select the controller you want to set and press . 4 . Select the setting you want. Allow : Permits access from the controller. Block : Blocks access from the controller.
3 . Select the device you want to delete and press OPTIONS . 4 . Select [ Remove ] from the options menu. 5 . Select [ OK ]. The selected device is deleted from the device list.
headphones closer to receiver if sound is intermittent. Listening with BLUETOOTH headphones (Pairing operation) See "Compatible BLUETOOTH version and profiles " for details on BLUETOOTH device versions and profiles that can be paired.
Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level of the receiver. Compatible smartphones Smartphones with the NFC function (compatible OS: Android 2.
If [ STR- DN1060 ] or [ STR- DN860 ] is not displayed, repeat this process from step 1. 5 . When the BLUETOOTH connection is established, the device name appears and [ BT ] lights in the display panel. 6 . Start playback on the BLUETOOTH device. 7 . Adjust the volume.
* If you press when no BLUETOOTH device is connected, the receiver automatically connects to the last connected BLUETOOTH device. Note These operations may not be available for certain BLUETOOTH devices. The actual operations may also differ depending on the connected BLUETOOTH device.
1 . Select [ Transmitter ] in [ Bluetooth Mode ] from the Bluetooth Settings menu. [BT TX] appears on the display panel. 2 . Turn on the BLUETOOTH function on the BLUETOOTH headphones. 3 . Select the name of the BLUETOOTH headphones from the [ Device List] in the Bluetooth Settings menu.
[100] Using BLUETOOTH Features Listening with BLUETOOTH headphones Compatible BLUETOOTH version and profiles “Profile” refers to a standard set of capabilities for various BLUETOOTH product capabilities. This receiver supports the following BLUETOOTH version and profiles: Compatible BLUETOOTH version: BLUETOOTH Specification Version 3.
1 . Download the “SongPal” application to your mobile device. 2 . Run “SongPal” and follow the on- screen instructions. 3 . Connect your mobile device to the receiver using the NFC function or by manual operation. After the connection is completed, you can control the receiver using “SongPal.
located in another room to the SURROUND BACK/BI - AMP/FRONT HIGH/FRONT B/ZONE 2 terminals. For example, you can listen to the same music from an AV device located in the living room in both the living room and kitchen, or watch a movie in the living room while music from a different device is played in the kitchen.
HDMI zone You can enjoy movies and music in another room by connecting a TV or different AV receiver located in another room to the HDMI OUT B/HDMI ZONE terminals. For example, movies or music from an AV device located in the living room can be played at high quality in a bedroom.
Source signal from the HDMI IN BD/DVD jack SAT/CATV: Source signal from the HDMI IN SAT/CATV jack Source signal from the VIDEO/AUDIO IN SAT/CATV jacks Source signal from the COMPONENT VIDEO IN SAT/CAT.
SAT/CATV: Source signal from the AUDIO IN SAT/CATV jacks VIDEO 1 : Source signal from the AUDIO IN VIDEO 1 jacks SA - CD/CD : Source signal from the AUDIO IN SA - CD/CD jacks FM TUNER : FM broadcasts .
Source signal from the HDMI IN BD/DVD jack GAME: Source signal from the HDMI IN GAME jack SAT/CATV: Source signal from the HDMI IN SAT/CATV jack VIDEO 1 : Source signal from the HDMI IN VIDEO 1 jack V.
Speakers Speaker cable (not supplied) Note When using this Zone 2 connection, you need to set up the SPEAKERS SURROUND BACK/BI - AMP/FRONT HIGH/FRONT B/ZONE 2 terminals.
Note When using this Zone 3 connection, you need to set up the SPEAKERS SURROUND/ZONE 3 terminals. Only audio signals from [ USB ], [ Bluetooth ] (while in BLUETOOTH RX mode only), [ Home Network ], [ Music Services ], [ FM TUNER ] and audio signals input from AUDIO IN jacks are output to the Zone 3 speakers.
Follow the procedure below after connecting the speakers installed in Zone 3 to the SURROUND/ZONE 3 terminals of the receiver. 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu. 2 . Select [ Speaker Pattern]. 3 . Select one of the following speaker patterns displayed on the TV screen: 3/0.
If [ 2. xxxx (input name)] or [ 3. xxxx (input name)] disappears in step 3, press ZONE SELECT again. To exit zone operation Press ZONE SELECT on the receiver repeatedly to select the zone you want to exit, then press ZONE POWER . Available input for zone operations See “ Available inputs for each zone (for STR- DN1060 only) .
Only audio signals from [ USB ], [ Bluetooth ] (only when in BLUETOOTH RX mode), [ Home Network ], [ Music Services ], [ FM TUNER ] and audio signals input from AUDIO IN jacks are output to the Zone 2 speakers. External digital input from OPTICAL IN , COAXIAL IN , HDMI IN jacks and Screen mirroring cannot be output to Zone 2.
You can enjoy sound from the receiver in Zone 2 by the following procedure. 1 . Turn on the amplifier in Zone 2. 2 . Press ZONE SELECT on the receiver repeatedly to select Zone 2. 3 . Press ZONE POWER on the receiver. Zone 2 is activated. 4 . Select the source signals you want to output using INPUT SELECTOR on the receiver while [ 2.
Speakers TV Amplifier/receiver HDMI cable (not supplied) Note To use this connection, set [ HDMI Out B Mode ] in the HDMI Settings menu to [ Zone ]. [113] Using the Multi - Zone Features (for STR- DN1060 only) Enjoying video and sound in another room using a TV or another receiver (for STR- DN1060 only) 2.
work. For details on selecting the HDMI zone input, see “ 4. Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI zone) (for STR- DN1060 only).
another room using a TV or another receiver (for STR- DN1060 only) 4. Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI zone) (for STR- DN1060 only) You can enjoy sound from the receiver in the HDMI zone by following the steps below.
The “BRAVIA” Sync function allows communication between Sony products such as TVs, Blu - ray Disc players, DVD players, and AV amplifiers that support the Control for HDMI function. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI (High - Definition Multimedia Interface).
[118] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) Enjoying an input source from a connected device immediately (One -Touch Play) When you play content on a device connected to the receiver via an HDMI connection, the receiver is also automatically turned on and switched to the appropriate HDMI input.
[120] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) Turning off the receiver and connected devices simultaneously with the TV (System Power -Off) If the TV, re.
[122] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) About Home Theatre Control If a Home Theatre Control - compatible TV is connected to the receiver, an icon for Internet based applications appears on the connected TV.
By connecting an MHL device with an MHL cable (not supplied), you can use One - Touch Play and Remote Easy Control. These functions allow communication with Sony “BRAVIA” Sync - compatible TVs using an HDMI cable (not supplied). Note These functions may not work depending on the connected MHL device.
1 . Turn on the receiver and the two monitors. 2 . Press HDMI OUTPUT . Each time you press the button, the output will be switched as follows: HDMI A - HDMI B - HDMI A+B - HDMI OFF Note [ HDMI A+B ] m.
Depending on the input, [ Input Mode ] may be dimmed on the TV screen and other modes cannot be selected. When [ Analog Direct] is being used, audio input is set to [ Analog ]. You cannot select other modes. Hint You can also use INPUT SELECTOR on the receiver to select the input in step 1.
OPT 2: STR- DN1060: BD/DVD , GAME , SAT/CATV , VIDEO 1 , VIDEO 2 , SA - CD/CD STR- DN860: BD/DVD , GAME , SAT/CATV , VIDEO , SA - CD/CD COAX : STR- DN1060: BD/DVD , GAME , SAT/CATV , VIDEO 1 , VIDEO 2.
1 . Select [ Custom Preset ] from the home menu. 2 . Press OPTIONS with a preset for which you want to edit settings among from [ 1: Movie ], [ 2: Music], [ 3: Party ] or [ 4: Night ] selected. 3 . Select the menu you want from the options menu. Edit : Allows you to customize and save the settings to suit your preferences.
[131] Using Other Features Saving and recalling various settings for the receiver (Custom Preset) Items for which you can save settings and the default values for each item 1: Movie Input : BD/DVD Tuner Preset : – Volume : – HDMI Output : – Party Mode (for STR- DN1060 only): – Sleep : – Sound Field : HD - D.
Center Bass : – Center Treble : – Surround Bass : – Surround Treble : – Front High Bass : – Front High Treble : – 3: Party Input : – Tuner Preset : – Volume : 27 HDMI Output : – Part.
Surround Bass : – Surround Treble : – Front High Bass : – Front High Treble : – [132] Using Other Features Using the sleep timer Using the sleep timer (Sleep) You can set the receiver to turn off automatically at a specified time. 1 . Select [ Setup ] - [ System Settings] from the home menu.
1 . Select the input for which you want to check information. 2 . Press DISPLAY MODE on the receiver repeatedly. Each time you press DISPLAY MODE, the display will change cyclically as follows: Index .
If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by selecting [ Setup ] - [ Easy Setup ] from the home menu. [135] Adjusting Settings Speaker Settings 1. About Auto Calibration Auto Calibration allows you to perform automatic calibration as follows.
Note Auto Calibration is not available when [ Bluetooth Mode ] is set to [ Transmitter ]. The speakers emit very loud sound during the calibration and the volume cannot be adjusted.
The indicators on the display panel shows which set of terminals are selected. SP A : Speakers connected to the SPEAKERS FRONT A terminals. SP B (*) : Speakers connected to the SPEAKERS SURROUND BACK/BI - AMP/FRONT HIGH/FRONT B terminals.
3 . Follow the instructions on the TV screen, then press to select [ Start ]. The measurement starts in 5 seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches.
2 . Follow the instructions on the TV screen and then press to select [ Start]. The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches.
This function does not work in the following cases: [ Analog Direct ] is being used. Headphones are connected. [ Auto Calibration] has not been performed. [ Bluetooth Mode ] is set to [ Transmitter ] The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.
only) You can select the speaker pattern for the SPEAKERS SURROUND terminals and set how to assign the terminals. 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu. 2 . Select [ Speaker Pattern]. 3 . Select the desired speaker pattern according to the speaker installation example displayed on the TV screen, then select [ Save ].
4 . Set [ Sur Back SP Assign ] to any of the following settings (*). Zone2 (for STR- DN1060 only) When using the Zone 2 connection. Bi- Amp When using the bi - amplifier connection. Front B When using the front B speaker connection. Off When none of the connections above are used.
Note [ Size ] cannot be set in the following cases: Headphones are connected. [ Bluetooth Mode ] is set to [ Transmitter ]. Hint The surround back speakers will be set to the same setting as that of the surround speakers.
You can adjust the level of each speaker (front left/right, front high left/right, center, surround left/right, surround back left/right and subwoofer). 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu. 2 . Select [ Level ]. 3 . Select the speaker on the screen for which you want to adjust the speaker level.
The adjusted value is shown on the TV screen during adjustment. To output a test tone from adjacent speakers See “ Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise) .
You can use the following parameters to adjust the tonal quality (bass/treble level) of the front, center, surround/surround back and front high speakers. Level (dB) Frequency (Hz) Bass Treble 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu.
By using the front high speakers, you can lift up the sounds of the center speaker to an appropriate height on the screen, allowing you to enjoy natural sound without discomfort. 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu. 2 . Select [ Center Speaker Lift Up ].
[ Bluetooth Mode ] is set to [ Transmitter ]. [153] Adjusting Settings Speaker Settings Selecting the unit of measurement (Distance Unit) You can select the unit of measurement for setting distances. 1 . Select [ Setup ] - [ Speaker Settings ] from the home menu.
This function may not work on some content via a USB device or home network. This function works when [ 2ch Stereo ], [ A.F.D. ], [ Multi Stereo ] or [ Headphone(2ch) ] is selected. However, this function does not work in the following cases: The [In- Ceiling Speaker Mode ] function is being used.
[156] Adjusting Settings Audio Settings Selecting a sound field (Sound Field) You can select from a variety of sound field modes according to speaker connections or input sources. 1 . Select [ Setup ] - [ Audio Settings] from the home menu. 2 . Select [ Sound Field ].
2 . Select [ HD - D.C.S. Type ]. 3 . Select the setting you want. Dynamic Theater Studio Note This function works only when the sound field is set to [ HD - D.C.S. Type ]. This function does not work in the following cases: Headphones are connected. [ Bluetooth Mode ] is set to [ Transmitter ].
This function may not work depending on the audio format. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals depending on the audio format. Hint You can also select [ In - Ceiling Speaker Mode ] in [ Sound Effects] from the home menu.
[160] Adjusting Settings Audio Settings Setting the low -pass filter for the subwoofer output (Subwoofer Low Pass Filter) You can turn the low - pass filter for the subwoofer output on or off. You can set the function for each input to which an audio input jack is assigned independently.
available only when the monitor supports the A/V Sync function. 0 ms – 300 ms : You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.
Volume) This receiver can adjust its volume automatically depending on the input signal or content from a connected device. This function is useful, for example, when the sound of commercials is louder than a TV program. 1 . Select [ Setup ] - [ Audio Settings] from the home menu.
[165] Adjusting Settings Audio Settings Compressing the dynamic range (Dynamic Range Compressor) You can compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at a low volume late at night, etc. This function only works for Dolby Digital and Dolby TrueHD sources.
[167] Adjusting Settings Screen Settings Outputting 24p video signals when watching content from other networks (Network content 24p Output) 1 . Select [ Setup ] - [ Screen Settings] from the home menu. 2 . Select [ Network content 24p Output ]. 3 . Select the setting you want.
If your Sony device is not detected when [ Auto1 ] is selected, the setting will have the same effect as the [ Auto2 ] setting. The [ 4K Output ] setting does not affect video signals from the HDMI IN jacks. If you want to upscale video signals from the HDMI IN jacks to 4K, use [ HDMI In 4K Scaling ] in HDMI Settings menu.
2 . Select [ HDMI Deep Color Output ]. 3 . Select the setting you want. Auto 12bit : Outputs 12bit video signals if the connected TV is compatible with Deep Color. 10bit : Outputs 10bit video signals if the connected TV is compatible with Deep Color. Off : Select this if the picture is unstable or the colors appear unnatural.
Upscaling video signals to 4K (HDMI In 4K Scaling) You can upscale video signals to 4K and output them through the HDMI OUT jacks of the receiver. 1 . Select [ Setup ] - [ HDMI Settings] from the home menu. 2 . Select [ HDMI In 4K Scaling ]. 3 . Select the setting you want.
[174] Adjusting Settings HDMI Settings Passing HDMI signals through (Standby Through) You can output HDMI signals to the TV even when the receiver is in standby mode. 1 . Select [ Setup ] - [ HDMI Settings] from the home menu. 2 . Select [ Standby Through ].
2 . Select [ Audio Out]. 3 . Select the setting you want. AMP : HDMI audio signals from playback devices are only output to the speakers connected to the receiver. Multi - channel sound can be played back as it is. TV + AMP : The sound is output from the speaker of the TV and the speakers connected to the receiver.
This setting is invalid when [ FM TUNER ], [ USB ], [ Bluetooth ], [ Home Network ], [ Music Services ] or [ Screen mirroring ] is selected. [177] Adjusting Settings HDMI Settings Selecting the method to use the HDMI OUT B jack (HDMI Out B Mode) (for STR-DN1060 only) The HDMI OUT B/HDMI ZONE jack can be used for HDMI zone.
1 . Select [ Setup ] - [ HDMI Settings] from the home menu. 2 . Select [ Priority]. 3 . Select the setting you want. Main & Zone : You can enjoy the same input in the main zone and HDMI zone. However, there may be some interference between the audio and video signals in the main zone and those in the HDMI zone.
only) If you select [ Off ], it takes more time for images to appear after switching the input. However, the sound quality is improved because the receiver receives signals only from the selected HDMI input jack.
Icon You can set the icon displayed on the Watch/Listen menu. Name You can change the name displayed on the Watch/Listen menu. Watch / Listen You can set whether an input is displayed on the Watch menu or the Listen menu. Watch: Displays an input to the Watch menu.
You can enter up to 8 characters for each input name. 1 . Select [ Setup ] - [ Input Settings ] from the home menu. 2 . Select the input name you want to change. 3 . Select [ Name ]. An on- screen keyboard appears on the TV screen. 4 . Press / / / and to select characters one by one to enter the name.
See [ Network Connection Status ] when checking the network settings. [184] Adjusting Settings Network Settings Setting up a wireless LAN connection Before performing network settings When your wireless LAN router (access point) is Wi - Fi Protected Setup (WPS) - compatible, you can easily set the network settings with the WPS button.
If using a (WPS) PIN code Select [ New connection registration ] - [ (WPS) PIN Method ] in step 4, then follow the on- screen instructions. Hint See [ Network Connection Status ] when checking the network connection status.
mirroring (Screen mirroring RF Setting) If you are using multiple wireless systems such as wireless LANs (Local Area Networks), the wireless signals may be unstable. In this case, playback stability may be improved by setting the priority radio frequency channel for Screen mirroring.
1 . Select [ Setup ] - [ Network Settings] from the home menu. 2 . Select [ Auto Renderer Access Permission ]. 3 . Select the setting you want. On Off [190] Adjusting Settings Network Settings Setting.
2 . Select [ Registered Remote Devices]. Note You can register up to 5 TV SideView devices. If you want to add a new device when a maximum of 5 devices are set, remove unnecessary devices before adding the new device.
[194] Adjusting Settings Bluetooth Settings Selecting the BLUETOOTH mode (Bluetooth Mode) You can enjoy contents from remote devices on this receiver or listen to sound from this receiver on other devices such as headphones. 1 . Select [ Setup ] - [ Bluetooth Settings ] from the home menu.
[195] Adjusting Settings Bluetooth Settings Checking the BLUETOOTH device list (Device List) You can check a list of the paired and detected BLUETOOTH receivers when [ Bluetooth Mode ] is set to [ Transmitter ]. You can perform pairing with detected devices from the list.
[197] Adjusting Settings Bluetooth Settings Setting BLUETOOTH audio codecs (Bluetooth Codec - AAC/Bluetooth Codec - LDAC) You can enable and disable AAC (Advanced Audio Coding) or LDAC audio. 1 . Select [ Setup ] - [ Bluetooth Settings ] from the home menu.
You can set the transmission data rate for LDAC playback. 1 . Select [ Setup ] - [ Bluetooth Settings ] from the home menu. 2 . Select [ Wireless Playback Quality ]. 3 . Select the setting you want. Auto : Sets the transmission data rate for LDAC automatically.
up in amber if the power for Zone 2/Zone 3/HDMI zone is turned on. Hint You can also turn the power for Zone 2/Zone 3/HDMI zone on or off using ZONE POWER on the receiver.
1 . Select [ Setup ] - [ Zone Settings ] from the home menu. 2 . Select [ Zone2 Volume ] or [ Zone3 Volume ]. 3 . Select the volume level. Note If [ Zone2 Line Out] is set to [ Fixed ], adjust the volume using the receiver in Zone 2. Hint You can also adjust the volume using ZONE SELECT and MASTER VOLUME on the receiver while [ 2.
[203] Adjusting Settings System Settings Selecting the language (Language) (for USA, Canadian, European and Australian models only) You can select the language of messages on the screen. 1 . Select [ Setup ] - [ System Settings] from the home menu. 2 .
when it is detected from a device connected to the same network. 1 . Select [ Setup ] - [ System Settings] from the home menu. 2 . Select [ Quick Start/Network Standby ].
Switch the brightness of the display panel between 3 levels. 1 . Select [ Setup ] - [ System Settings] from the home menu. 2 . Select [ Dimmer]. 3 . Select the setting you want.
Turn the receiver on or off. [209] Adjusting Settings System Settings Receiving information on newer software (Software Update Notification) You can set whether or not to be informed of newer software version information on the TV screen. 1 . Select [ Setup ] - [ System Settings] from the home menu.
Following histories will be erased. Connected BLUETOOTH devices Mobile devices connected using the Screen mirroring function Content input with the on - screen keyboard [211] Adjusting Settings System Settings Assigning a name to the receiver (Device Name) You can assign a device name to the receiver to make it easily recognizable by other devices.
Checking software license information (Software License Information) You can display the software license information. 1 . Select [ Setup ] - [ System Settings] from the home menu. 2 . Select [ Software License Information ]. 3 . Follow the on- screen instructions.
[215] Adjusting Settings System Settings Updating the software (Software Update) 1 . Select [ Setup ] - [ System Settings] from the home menu. 2 . Select [ Software Update ].
3 . Press / repeatedly to select the parameter you want to adjust, then press . 4 . Press / repeatedly to select the setting you want, then press . To return to the previous display Press or BACK . To exit the menu Press AMP MENU . Note Some parameters and settings may appear dimmed on the display panel.
Characters or marks in some languages may not be displayed. [218] Adjusting Settings Reverting to the factory default settings Reverting to the factory default settings You can clear all memorized settings and restore the receiver to the factory default settings by the following procedure.
After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the receiver. If the problem persists, consult your nearest Sony dealer. [220] Troubleshooting Error messages An over - current from the USB port was detected.
Warning 41 , Warning 42 : The input from the microphone is too large. The distance between the speaker and the microphone may be too small. Set them further apart and perform the measurement again. Warning 43 : The distance and position of a subwoofer cannot be detected.
with each device. Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for 1080p, Deep Color (Deep Colour), 4K or 3D transmission. The output of the HDMI video signals of the receiver may be set to [ HDMI OFF]. In this case, set to [HDMI ON] (for STR- DN860 only).
When the receiver enters standby mode, the image from the last HDMI device selected before you turned off the receiver is displayed. If you are enjoying content from another device, play the content on the device and perform the One - Touch Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content.
Check that MASTER VOLUME on the receiver is not set to [ VOL MIN ]. Check that SPEAKERS on the receiver is not set to [ SPK OFF]. Check that headphones are not connected to the receiver.
devices require both L and R jack connections. Use an audio cable (not supplied). Adjust the speaker level. Check that the speaker settings are appropriate for the setup using [ Auto Calibration ] or [ Speaker Pattern] in the Speaker Settings menu.
Settings menu to: [ TV + AMP ] if you want to listen to the sound from the TV speaker and receiver. [AMP ] if you want to listen to the sound from the receiver only. When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver.
[236] Troubleshooting Sound Dolby Digital or DTS multi- channel sound is not reproduced. Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected device is available.
The speaker pattern setup is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. [240] Troubleshooting Sound No sound is output from the TV when the receiver is in standby mode. When the receiver enters standby mode, sound is output from the last HDMI device selected before you turned off the receiver.
4 . Select [ FM Mode ] from the menu. 5 . Select [ Monaural]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. [243] Troubleshooting Tuner You cannot tune to radio stations. Check that the antennas (aerials) are connected securely.
The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. [246] Troubleshooting iPhone/iPad/iPod The sound is distorted. Press - on the remote control repeatedly. You can also use MASTER VOLUME on the receiver.
[250] Troubleshooting iPhone/iPad/iPod The ringtone volume of an iPhone does not change. Adjust the ring volume using the controls on the iPhone. [251] Troubleshooting USB devices Are you using a compatible USB device ? If you connect an incompatible USB device, the following problems may occur.
problem in the operating instructions of the USB device. [254] Troubleshooting USB devices Playback does not start. Turn off the receiver, reconnect the USB device, and then turn on the receiver. Connect a compatible USB device. Select [ USB ] and select a folder/track, then press to start playback.
MP3 files in MP3 PRO format cannot be played. The audio file is a multiple track audio file. Some AAC files may not be played correctly. If you use a partitioned USB device, only audio files on the first partition can be played. Playback is possible up to nine levels (including the [ ROOT ] folder).
Cannot control the receiver using a “SongPal” device. It may take some time for the receiver to connect to the network after it is turned on. Try again later. The smartphone or tablet device may not be connected to the same network as the receiver.
Cannot connect to the network. Make sure the router or the wireless LAN router/access point is turned on. The network settings on the receiver may be incorrect. If the connection failed, set up the network connection again. Confirm that the receiver is connected to the router or the wireless LAN router/access point correctly.
Make sure that the audio file you are trying to play is in a format supported by this receiver. Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. Make sure that the repeat setting and shuffle setting are configured correctly.
Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this receiver. [269] Troubleshooting Home Network Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server.
network. The receiver itself does not support the Wake- on - LAN. Set [ Remote Start] to [ On ] if you want to turn the receiver on by operating the devices on a network. [272] Troubleshooting AirPlay The receiver cannot be found from an iPhone/iPad/iPod or iTunes.
[275] Troubleshooting Music Services Cannot connect the receiver to a service. Make sure that the router or the wireless LAN router/access point is turned on. Check [ Network Connection Status ]. If [ Not accessible] or [ Failed ] appears, set up the network connection again.
Confirm that the BLUETOOTH mode is selected correctly. The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the receiver. Press BLUETOOTH on the receiver to connect to the last connected BLUETOOTH device.
If there are obstructions between the receiver and your BLUETOOTH device, remove them or move the receiver and/or device avoid them. If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away.
DN1060 only). Make sure the HDMI OUTPUT setting is set to [ HDMI A] or [ HDMI A + B] (for STR- DN1060 only). [284] Troubleshooting “BRAVIA” Sync (Control for HDMI) TV sound cannot be heard from the speakers connected to the receiver. Make sure [ Control for HDMI] is set to [ On ] in the HDMI Settings menu.
Be sure to use an authorized MHL cable that bears the MHL logo. * For STR-DN1060 only [287] Troubleshooting Remote control The remote control does not function. Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver.
1 . Turn off the receiver. 2 . Hold down MUSIC and press (on/standby) on the receiver. [ S.F. CLEAR ] appears on the display panel and all sound fields are reset to their default setting. [290] Troubleshooting If the problem is not solved Customer support websites Refer to the following websites for the latest information on the receiver.
other countries. Apple, the Apple logo, AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc. App Store is a service mark of Apple Inc.
here: https://developer.spotify.com/esdk- third - party - licenses/ Spotify and Spotify logos are trademarks of the Spotify Group. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified.
When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn the LEVEL to just before the mid - point. If you connect a subwoofer with a crossover frequency function, set the value to maximum. If you connect a subwoofer with an auto standby function, set it to off (deactivated).
channel surround formats are downmixed to 2- channels. Analog Direct (A. DIRECT): You can switch the audio of the selected input to 2- channel analog input. This function enables you to enjoy high - quality analog sources. Only the volume and front speaker level can be adjusted when using this function.
remixed for a Blu - ray Disc to a volume level suitable for home use. The level of reflection and reverberation of sound is kept to a minimum, while dialogues and surround effects are reproduced vividly. PLll Movie : Performs Dolby Pro Logic II Movie mode decoding.
Portable Audio (PORTABLE) : Upscales existing sound sources to near hi - resolution sound quality with DSEE HX. This sound field makes you feel as if you are really at the recording studio or concert. DSEE HX only works on 2- channel sound sources with a sampling frequency of 44.
BLUETOOTH device name - Sound field currently applied - Volume level - Input you selected Menu list (on the display panel) The following options are available in each menu.
LH - 10.0 dB to LH +10.0 dB (0.5 dB interval) Front right high speaker level [ RH LEVEL ] (*2) RH - 10.0 dB to RH +10.0 dB (0.5 dB interval) Subwoofer Level [ SW LEVEL ] (*2) SW - 10.0 dB to SW +10.0 dB (0.5 dB interval) Speaker settings [< SPEAKER >] Speaker pattern [ SP PATTERN ] 5/2.
Front right high speaker distance [ RH DIST. ] (*2) RH 1.00 m to RH 10.00 m ( RH 3’3” to RH 32’9” ) (0.01 m (1 inch) interval) Subwoofer distance[ SW DIST. ] (*2) SW 1.00 m to SW 10.00 m ( SW 3’3” to SW 32’9” ) (0.01 m (1 inch) interval) Distance Unit [ DIST.
FH B. - 10 dB to FH B. +10 dB (1 dB interval) Front high speakers treble level [ FH TREBLE ] FH T. - 10 dB to FH T. +10 dB (1 dB interval) Zone settings [< ZONE >] (for STR- DN1060 only) Zone 2 .
Priority [ PRIORITY ] MAIN&ZONE , MAIN ONLY HDMI Audio Out [ AUDIO OUT ] AMP , TV+AMP HDMI Subwoofer Level [ SW LEVEL] SW AUTO , SW +10 dB , SW 0 dB Fast View [ FAST VIEW ] AUTO , OFF MHL Auto Input [ MHL.
speakers. (i.e. 3/0.1, 3/0, 2/0.1, 2/0) *6 You can only select this parameter if [ SP PATTERN ] is not set to a pattern with surround back and front high speakers. (i.e. 3/2.1, 3/2, 2/2.1, 2/2, 3/0.1, 3/0, 2/0.1, 2/0) *7 You can only select this parameter if the speaker is set to [ SMALL ].
JPEG: .jpeg, .jpg, jpe PNG (*4): .png GIF (*4): .gif *1 Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. *2 The receiver may not play this file format on a Home Network server. *3 The receiver does not play DST encoded files.
4 . Adjust the speaker level using MASTER VOLUME on the receiver. Available speakers: FL/FR (Front Left/Front Right) FL/CNT (Front Left/Center) CNT/FR (Center/Front Right) FR/SR (Front Right/Surround .
The menu is displayed on the display panel of the receiver. 2 . Select [ <LEVEL> ] (Level settings) - [ P. AUDIO ]. 3 . Select the speakers to output the sound from. The front 2 channel source sound is output sequentially from adjacent speakers.
An important point after buying a device Sony STR-DN1060/STR-DN860 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony STR-DN1060/STR-DN860 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony STR-DN1060/STR-DN860 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony STR-DN1060/STR-DN860 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony STR-DN1060/STR-DN860 will certainly help you make a decision on the purchase.
If you already are a holder of Sony STR-DN1060/STR-DN860, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony STR-DN1060/STR-DN860.
However, one of the most important roles played by the user manual is to help in solving problems with Sony STR-DN1060/STR-DN860. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony STR-DN1060/STR-DN860 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
