Instruction/ maintenance manual of the product SSM-125 Sony
Go to page of 28
Operating Instructions P age 2 _______________________________________________ Mode d'emploi P age 12 _______________________________________________________ Manual de instrucciones Página 20 __.
2 Owner’ s Recor d The model and serial numbers are located at the rear . Record the serial number in the space provided below . Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SSM-125 Serial No. ______________ W ARNING T o prevent fire or shoc k hazard, do not expose the unit to rain or moisture.
3 For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
4 T able of Contents Featur es .............................................................................. 4 Precautions ......................................................................... 5 Location and Function of Controls .................
5 Precautions Cleaning Clean the unit with a lightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit. If you have any question or problem concerning your unit that is not covered in this manual, please consult your nearest Sony dealer .
6 Location and Function of Controls 1 INPUT select switch Keep this switch released ( ø A) to monitor the signal from the VIDEO A IN connector . Depress this switch ( Ø B) to monitor the signal from the VIDEO B IN connector .
7 7 VIDEO A connectors and 75 Ω ON/OFF switch 8 VIDEO B connectors and 75 Ω ON/OFF switch T wo video input connectors (VIDEO A and VIDEO B) for the composite video signals and their loop-through output connectors. T o monitor the signals input to the VIDEO A IN connector, keep the INPUT select switch released ( ø A).
8 Connections Connecting a Video Camera or a VCR Connect the VIDEO IN connector to the video output of a video camera or a VCR. Video camera VCR Video camera VCR ON ON to video output to video output .
9 Connecting the Monitors Using the loop-through feature of this unit, the same picture can be obtained on all the monitors connected. Y ou can connect up to three monitors.
10 General System EIA standard Picture tube 12-inch picture measured diagonally 90-degree deflection Resolution More than 750 TV line (horizontal) V ideo input Composite: 0.5 – 2 Vp-p, sync negative ( × 2) V ideo input impedance High impedance for loop- through; 75 Ω terminated V ideo output Composite: 0.
11.
12 T able des matières Fonctionnalités ................................................................. 12 Précautions ....................................................................... 13 Localisation des commandes ..........................
13 Précautions Entretien Nettoyez l’appareil à sec avec un chif fon doux. N’utilisez jamais de solvant trop puissant, de type dissolvant ou benzine; vous risqueriez d’abîmer la finition extérieure de l’appareil. Pour toute question ou problème concernant cet appareil, veuillez vous adresser à votre revendeur Sony le plus proche.
14 Localisation des commandes Panneau avant 1 T ouche de sélection de l’entrée (INPUT) Maintenez cette touche sortie ( ø A) pour recevoir le signal provenant de l’entrée VIDEO A IN, et enfoncée ( Ø B) pour recevoir le signal provenant de l’entrée VIDEO B IN.
15 Panneau arrière 7 Entrée/sortie VIDEO A et touche de marche/arrêt 75 Ohms (ON/OFF) 8 Entrée/sortie VIDEO B et touche de marche/arrêt 75 Ohms (ON/OFF) Deux entrées vidéo (VIDEO A et VIDEO B) et deux sorties pour le fonctionnement en boucle.
16 Raccordements Raccordement avec une caméra vidéo ou un magnétoscope Raccordez la sortie de la caméra ou du magnétoscope et l’entrée du moniteur (VIDEO IN).
17 Raccordement de plusieurs moniteurs La fonction boucle de cet appareil permet d’obtenir la même qualité d’image sur tous les moniteurs reliés. V ous pouvez relier jusqu’à trois moniteurs. Réglez le contraste et la luminosité de chanque moniteur .
18 Caractéristique Système Standard EIA T ube image Diagonale d’image: 12 pouces Déflexion: 90 degrés Résolution Supérieure à 750 lignes télévision (Horizontale) Entrée vidéo Composée: 0.
19.
20 Características • Esta unidad puede utilizarse como monitor en un circuito cerrado de televisión o como monitor de reproducción/ visualización de vídeo. • Mediante una conexión derivada se puede ver la misma imagen hasta en tres monitores.
21 Precauciones Limpieza Limpie la unidad con un paño suave ligeramente humedecido en una solución de detergente suave. Nunca emplee disolventes fuertes, como diluyentes de pintura o bencina, ya que podrían dañar la superficie externa.
22 Ubicación y función de los controles Panel frontal 1 Interruptor de selección de entrada (INPUT) Para controlar la señal del conector VIDEO A IN, este interruptor no debe estar pulsado ( ø A). Para controlar la señal del conector VIDEO B IN, este interruptor debe estar pulsado ( Ø B).
23 Panel posterior 7 Conectores VIDEO A e interr uptor ON/OFF de 75 ohmios 8 Conectores VIDEO B e interr uptor ON/OFF de 75 ohmios Dos conectores de entrada de vídeo (VIDEO A y VIDEO B) para las señales de vídeo compuestas y sus conectores de salida para conexión derivada.
24 Conexiones Conexión de una cámara de vídeo o una videograbadora Conecte el conector VIDEO IN a la salida de vídeo de una cámara de vídeo o una videograbadora.
25 Conexión de los monitores La función de conexión derivada de esta unidad permite ver la misma imagen en todos los monitores conectados, que pueden ser hasta tres.
26 Especificaciones Diseño y especificaciones sujetos a cambio sin previo aviso. Generales Sistema CCIR estándar T ubo de imagen Imagen de 12 pulgadas en diagonal 90° de deflexión Resolución Más.
27.
Sony Corporation Printed in Korea.
An important point after buying a device Sony SSM-125 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony SSM-125 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony SSM-125 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony SSM-125 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony SSM-125 will certainly help you make a decision on the purchase.
If you already are a holder of Sony SSM-125, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony SSM-125.
However, one of the most important roles played by the user manual is to help in solving problems with Sony SSM-125. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony SSM-125 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
