Instruction/ maintenance manual of the product SRX- R110 Sony
Go to page of 38
3-872-930- 01 (1) SR Pr ojector © 2005 Sony Corporation SRX-R110 SRX-R105 取扱説明書 ______ _______ _______ _______ _______ _______ ___ JP Operating Instructions _______ _______ _______ _______ .
GB 2 T o pre vent fire or shoc k hazar d, do not expose the unit to rain or moisture . T o a v oid electrical shock, do not open the cabinet. Refer servicing to qualified pers onnel only .
3 GB GB Table of Contents Chapter 1 Overview Precauti ons .................. .............. .............. .............. .............. ............ 5 Using the CD-ROM Manual ............ .............. .............. .............. ....... 6 CD-ROM System Requirements .
GB 4 Chapter 3 Projec ting Projecting the Pic ture ............... .............. .............. .............. .......... 21 Using the Remote Commander ........................................................... 21 Using the Computer for Controlling the Projector .
5 GB Precautio ns Chapter Chapter 1 Ov erview 1 Overview Precautions On safety • Operate the unit on 200 – 240 V AC, 50/60 Hz (SR X- R110), or 100 – 2 40 V AC, 50/60 Hz (SRX-R105). • Should a ny liquid or so lid object fall into t he cabinet, unplug t he unit and h ave it check ed by qualif ied Sony personnel before ope rating it further.
GB 6 Using the CD-ROM Manual Chapter 1 Ov erview On c leaning • To keep t he cabinet lo oking new, period ically cl ean it with a soft cl oth. Stubborn stains may be removed wit h a cloth l ightly d ampened wi th a m ild dete rgent solu tion.
7 GB Feat ures Chapter 1 Ov erview • If you lose the CD-ROM disc or become unable t o read its content , for example because o f a hardware failure, you can do o ne of the fol lowing. - You can purchase a new CD-ROM disc to replace o ne that has been lost or damage d.
GB 8 Locat ion and Functio n of Controls Chapter 1 Ov erview V e rsatile Se tup Vari ous sign al input The projecto r is equipped with an RS232C connect or and ETHERNET connector for communication.
9 GB Locat ion and Functi on of Controls Chapter 1 Ov erview Left Side/Rear a Cool ing u nit A cooling fan and the two lamp ho uses are install ed here.
GB 10 Location and Fun ction of Contro ls Chapter 1 Ov erview a Menu bar File m enu Selec ting “Quit” f rom the File menu e xits the SRX Control ler.
11 GB Locat ion and Functi on of Controls Chapter 1 Ov erview c Input signal select drop-down list box Selec ts the input signal you want to project on the screen. The SCREEN CONTROL window chang es depending on the screen mod e selected with the screen mode button ( 1 ).
GB 12 Location and Fun ction of Contro ls Chapter 1 Ov erview B: Selects the signal inp ut from the connect ors on the optional input board i nstalled in the INPUT B section. C: Selects the signal input from the connectors on the optional input board i nstalled in the INPUT C section.
13 GB Precaut ions on Installat ion Chapter Chapter 2 Prepar ations 2 Preparations Precautions on Installation Unsuitable Insta llation Do not install th e projector in the fol lowing situation s. Such instal lations may cau se a malfunction o r damage to the pr ojec tor .
GB 14 Install ation Chapter 2 Prepa rations Unsuitable Conditions Do not use t he projecto r under th e following conditions. Laying the uni t on its side or upside down Tilting the unit to the right or left Avoid ti lting the proj ector more than ± 10 d egrees, and avoid insta lling it in place other than a flo or.
15 GB Instal ling the SRX Contr oller in a Computer for Co ntrolling th e Projector Chapter 2 Prepar ations Do not turn t he spanner forcibly wh en the screw has fully rotated. Otherwise, the spa nner may sl ip and injure your hand. Installi ng the Pr ojector This sectio n describes briefly h ow to install t he projecto r on the floor.
GB 16 Installing the SRX Controller in a Computer for Controlling the Pr ojector Chapter 2 Prepa rations After a while, the Welcome page of the SRX Controller appears. 2 Click “Next.” The License Agre ement window appears. 3 Read the lice nse agreement, click “I acc ept…” if you agree to be bound by the t erms, and click “Next .
17 GB Connect ing a Computer for Cont rolling the Pro jector Chapter 2 Prepar ations Connectin g a Compute r for Controlling the Projector Connect a computer fo r controlling the projector t o the projector v ia the ETHERNET connector or the RS232C connector.
GB 18 Startin g the SRX Control ler Chapter 2 Prepa rations Starting the SRX Controller Starting the SRX Contr oller Double-click the icon for the SRX Controller in the deskto p window of the computer. The SRX Controller starts and the Browser Screen is displayed .
19 GB Connecti ng the Proj ector Chapter 2 Prepar ations Connectin g the Project or When yo u connect t he proje ctor, mak e sure to : • Turn off all equ ipment before ma king any connect ions.
GB 20 Connect ing the Project or Chapter 2 Prepa rations Connecting with a Computer Attach t he optional LKRI-001 an alog input b oard to the input b oard attachment part on the p rojector, and connect with a compute r. Select “ RGB” in “Signal Mode ” of “Input Sou rce” in the PICTURE C ONTROL window.
21 GB Projectin g the Pictu re Chapter Chapter 3 Pro jecting 3 Projecting Projecting t he Picture Use the supplie d Remote Commande r or a computer in which th e supplied SR X Controlle r is installe d to proj ect the picture on t he screen.
GB 22 Projecting the Pi cture Chapter 3 Projec ting 1 Set the main power switch on the left side of the projector to t he upper position. The STATUS LAMP indi cator lights red an d the projecto r goes into standby mo de. 2 Press the ? bu tton to tu rn on th e projector.
23 GB Projectin g the Pictu re Chapter 3 Pro jecting Using the Computer fo r Controlling the Pr ojector 1 Set the main power switch on the left side of the projector to t he upper position. The POWER and ST ATUS LAMP indicat ors light red and the p rojector goes into st andby mode.
GB 24 Projecting the Pi cture Chapter 3 Projec ting When you selec t the input fro m the connectors on th e LKRI-001 input b oard, select the a ppropriate input signal from “Mode ” of “Input Sou rce” in the PICTURE CONTROL window. Improper se tting may cause deteri oration of the picture.
25 GB Display ing the Control Fun ction Menu Window Chapter Chapter 4 Adjustment s and Setting s Using the SRX Contr oller 4 Adjustments and Settings Using the SRX Controller Displaying the Control Fu.
GB 26 PICTURE CO NTROL Window Chapter 4 Adjustment s and Settings Using the SRX Contro ller About the items that cannot be adjusted Items th at cannot be adju sted dependi ng on the inp ut signal are not di splayed in the window. For detail s, see “Input Sign als And Ad justable /Setti ng Items” on page 30 .
27 GB COLOR/FRAME Window Chapter 4 Adjustment s and Setting s Using the SRX Contr oller Signal Adjust Adjusts the pi cture quality o f the in put signal. Clicking increases the set ting value, and decreases it. Clicki ng the RESE T button resets all th e settings to the factory preset values.
GB 28 INSTALLATION Wind ow Chapter 4 Adjustment s and Settings Using the SRX Contro ller Frame Adjust Adjusts the ho rizontal size and the posi tion of the pict ure. Clicking increases the set ting value, and decreases it. Clicki ng the RESE T butto n resets all th e setting s of “Frame Adjust” to the factory-preset values.
29 GB INSTAL LATION Window Chapter 4 Adjustment s and Setting s Using the SRX Contr oller INS T ALLA TION Select s how to inst all the pr ojector. Front: Sele cts front pr ojectio n. Rear: Selects rear proj ection. LAMP SELECT Selects whe ther to use o ne of two lamps or both lamps.
GB 30 Input Signals An d Adjustable/ Setting I tems Chapter 4 Adjustment s and Settings Using the SRX Contro ller Input Signals And Adju stable/Setting Items Some items of “Signal Adjust” i n the PICTURE CONTR OL window a nd “Frame Adjust” in t he COLOR/FRAME window are not adj usted or set dependi ng on the input signa ls.
31 GB Lamp Li fe Chapter Chapter 5 Others 5 Others Lamp Life Recommended time for repl acement of the projecti on lamp is as follows: SRX-R110: Approx. 80 0 hours SRX-R105: Approx. 1,0 00 hours The “Lamp A” and “ Lamp B” bar indi cators in the Cont rol Functio n Menu window become red when the time for replacement is c oming near.
GB 32 Troubleshooting Chapter 5 Other s Troubleshoot ing If the projector appears t o be operating erratical ly, try to diagnose a nd correct the probl em using the following guide. If the pr oblem still pe rsists, consu lt with quali fied Son y personnel.
33 GB Error Me ssages Chapter 5 Others Error Messages The error messages are d isplayed in the STATUS MESSAGE window on the proj ector and the Error di splay window of the SRX Controller. If there are t wo or more messages, a di splayed message change s each 5 seconds.
GB 34 Error Messages Chapter 5 Other s 31 REAR F AN ALER T Tro uble with the huge f an at the rear , or the harness is di sconnected or do wn. 32 LO W REAL TIME C LOCK B A TTER Y The R TC ba ttery (BT201) for the SY -321 board shou ld be replaced. 33 FPGA CONFIG F AILURE An internal line does not function properly .
35 GB Specifications Chapter 5 Others Specifications Optical c haracteristic s Projecti on system SXRD (Si licon X- tal Refl ective Dis play) 3 pane l prism color in tegratio n system SXRD 8,847,360 p.
GB 36 Specifications Chapter 5 Other s Design and spe cifications are subject to chan ge without notice. Optional acce ssories Projecti on lamp house LKRX-B110 (for SRX-R110) LKRX-B105 (for SRX-R105) .
37 GB Specifications Chapter 5 Others Displa yed ima ge size in multipl e screen mode Unit: p ixel * The UXGA signal does not support the qu ad-screen mode and no pi cture is displayed.
Index A Adjusters 14 Adjusting focus 2 8 lens shift 28 pict ure 12 , 27 zoom 28 B Batte ry installation 12 note s 12 C Carryin g handles 14 CD-ROM manual 6 Color 27 Color Space 2 7 Color Temp 27 COLOR.
An important point after buying a device Sony SRX- R110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony SRX- R110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony SRX- R110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony SRX- R110 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony SRX- R110 will certainly help you make a decision on the purchase.
If you already are a holder of Sony SRX- R110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony SRX- R110.
However, one of the most important roles played by the user manual is to help in solving problems with Sony SRX- R110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony SRX- R110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
