Instruction/ maintenance manual of the product SRP-X500P Sony
Go to page of 6
SONy BID SPECIFICATION FOR POWERED MIXER MODEL NUMBER SRP-X500P INSTRUCTIONS: REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND PROPOSALS. THE OBJECTIVE OF THIS BI D SPECIFICATION IS TO ASS.
1.0 General Information The purpose of this information is to provide the specification for a product wh ose primary purpose is the signal distributi on of audio, video and / or com puter graphics information to audio speakers, video or graphics displays or other processing devices.
480P (60Hz) 575P (50Hz) 720P (60Hz) 1035i (60Hz) 1080i (50 and 60Hz) VGA Computer Graphics (Modes 1, 2 and 3, 60 – 85Hz) VESA 800x600 Computer Graphics (56 – 85Hz) VESA 1024x768 Computer Graphics .
The advanced serial control jack shall employ the use of a standardized device control protocol that is commonly accepted and under stood by control syst ems manufacturers.
5.0 Performance Specifications This device shall fully support all video colo r systems using pass-through capability. The maximum video bandwidth shall be at least 10MHz. The maximum RGB bandwidth shall be at least 150MHz. The device shall be capable of passing a resolution of at least 1280 x 1024 pixels at 60Hz refresh.
7.0 Connectivity Information This device shall provide for connection of mu ltiple source devices without employing the use of an external interface. These c onnections shall include the following: (4.
An important point after buying a device Sony SRP-X500P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony SRP-X500P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony SRP-X500P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony SRP-X500P you will learn all the available features of the product, as well as information on its operation. The information that you get Sony SRP-X500P will certainly help you make a decision on the purchase.
If you already are a holder of Sony SRP-X500P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony SRP-X500P.
However, one of the most important roles played by the user manual is to help in solving problems with Sony SRP-X500P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony SRP-X500P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
