Instruction/ maintenance manual of the product SLV-SE200V1/V2 Sony
Go to page of 92
3-868-342- E1 (1) Video Cassette Recor der Oper ating In structions SL V -SE100A1/A2 SL V -SE200V1/V2 SL V -SE250D/P SL V -SX250D SL V -SE300D1/D2 SL V -SE450D/P SL V -SE480D © 2000 Sony Cor poration PA L P AL NTSC 4.43 P AL NTSC 4.43 P AL NTSC 4.43 P AL NTSC 4.
2 W A RNI NG W ARNING T o pr e vent f ire or shoc k hazard , do no t exp os e the unit to rain or moisture. T o av oid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . Mains lead must only be changed at a qualified service shop.
3 T able of contents Getting Started T able of co ntents Gett ing Star ted 4 Step 1 : Unpac king 5 Step 2 : Setting up the remote commander 9 Step 3 : Connecting the VCR 13 Step 4 : T uning your TV to.
4 Unpacking Getting Started Step 1 : Unpac king Check that you have recei ved the following items with the VCR: • Remote com mander • Aerial cabl e • R6 (siz e AA) batterie s Check y our mo del .
Getting Started 5 Setting up the remot e commander Step 2 : S etting up th e remote co mmander Inserting the batteries Insert two R6 (size AA) batteries by matchi ng the + and – on the batteries to the diagra m inside th e battery c ompartment.
6 Setting up the remot e commander TV contr ol b uttons T o Press Set the TV to sta ndb y mo d e ? / 1 Sele ct an in put source : aeri al in or line in t TV/V IDEO Select the TV ’ s progra mme posit.
Getting Started 7 Setting up the remot e commander Notes • W i th normal use, the batterie s shoul d la st abou t three to six months. • If you do not use t he remote comm ander for an extended pe riod of time, rem o ve the batte ries to avoid possible dam age from ba ttery leakag e.
8 Setting up the remot e commander Code n umbers o f contr ollab le TVs If more than one code nu m ber is listed , try ente rin g them on e at a tim e until you f ind the one that works with yo ur TV . T o switch to wide m ode, see th e footnotes be low t his table for th e applicable c ode numbe rs.
Getting Started 9 Connecting the VCR Step 3 : C onnecting the VCR If your TV has a Scart (EURO-A V) conn ector , see page 10. If y our TV does not ha ve a Scart (EURO-A V) c onnector Note • When you c onnect the VCR a nd your TV only wi th an aerial cab le, you have to tune your TV to th e V C R (see pag e 13) .
10 Connecting the VCR If y our TV has a Scart (EUR O -A V) connector Note • If the TV is conne ct ed to the L I N E -1 (TV) co nnecto r, sett in g the RF ch annel to OFF i s recom me nd ed. In the OFF position, onl y the signal from the a erial is output throug h the AERIAL OUT connector (see page 15).
Getting Started 11 Connecting the VCR About t he SMAR TLINK feat u res (not available on SL V -SE 100A1/A2) If the connect ed TV complies with SMAR TLINK, MEGALOGIC* 1 , EASYLINK* 2 , Q-Li nk* 3 , EUR.
12 Connecting the VCR Additio nal connection T o a satellite or digital tuner with Line T hrough (SL V -SE300D1/D2 and SE480D onl y) Using t he Line Through function, you can watc h pro gram mes f rom a satellite o r digital tuner connected to th is VCR on the TV ev en when the VCR i s t urned off.
Getting Started 13 T uning your TV to the V CR Step 4 : T uning y our TV to the VC R If your TV has a Scart (EURO-A V) conn ector , see page 15. If y our TV does not ha ve a Scart (EURO-A V) c onnector Follow the steps below so that your TV will prop erly recei ve the video sign als from your V CR .
14 T uning your T V to the VCR T o check to see if the TV tuning i s correct Set the TV to th e video channel and press P ROGRAM +/ – on the VCR. If the TV screen chan ges to a dif ferent pro gramme each time you pres s PR OGRAM +/ – , the TV tuni ng is correc t.
Getting Started 15 T uning your TV to the V CR If y our TV has a Scart (EUR O -A V) connector 1 Press ? / 1 ON/ST ANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR lightly . The factory- preset RF channel appears in the di splay window . The VCR signal is output through this cha nnel to t he TV .
16 Setting up the VCR wi th the Auto Set Up function Step 5 : Setting up the VCR with the A uto Set Up function Before using the VCR for the first time , set up th e VCR using the Auto Set Up funct i on.
Getting Started 17 Setting up the VCR with t he Auto Set Up function The abbre v iations of the count ries and l anguages a re as fo llows: 3 Press A UTO SET UP lightly . The VCR starts searchi ng for all of the receiv able channels and presets the m (in the appropriat e order for your local area* 2 ).
18 Setting up the VCR wi th the Auto Set Up function T o cancel the A uto Set Up fun ction Press A UT O SET UP . Tip • If you want to ch ange the lan gua ge for th e on- screen displa y from the one preset in t he A u to Set Up functio n, see page 24.
Getting Started 19 Setting the clock Step 6 : Setting the cl ock Y ou must set th e time and d ate on the VCR t o use the timer feat u res properly . The Auto Clo ck Set fu nction (not av ailable on SL V -SE10 0A1/A2, SE25 0P , and SE450P ) works on ly if a stati on in your a rea is broadca sting a time sig nal.
20 Setting the cloc k 3 Press M / m to highlig ht MANU AL ADJUST , then press OK. 4 Press M / m to set the day . 5 Press , to highlig ht the mon th and set the month pres sing M / m . 6 Set the yea r , hour , and minutes in sequence, press ing , to highlig ht the item to be set, and press M / m to select the digits .
Getting Started 21 Setting the clock Tips • T o chan ge the digits while setting, press < t o re tur n to the it em to be chan ged, and se lect the digits by pressing M / m . • If you want to retur n to the previous menu, highlight RE TU R N and press OK.
22 Setting the cloc k Changing the s tation f or the A uto Clock Set functi on (not a vai lable on SL V -SE100A1/ A2, SE250P , and SE450P) Bef ore y ou start … • T u rn on the VCR and the TV . • Set the TV to th e video ch annel. 1 Press MENU, then press M / m to highlig ht SETTINGS and press OK.
Getting Started 23 Setting the clock Tips • If you se t A UTO ADJUST to ON, the Auto Clo ck Set func tion is a cti vate d whene ver the VCR is tur ned of f . The ti me i s adju sted au toma tica ll y by ma king r efer ence to th e time sig nal from the stati on whose programme posi tion i s display ed i n the “ C LOCK PROGRAM ” row .
24 Selecting a language Sele cting a lan gu age Y ou can chang e the on-scr een displa y language fro m the one you selecte d with the Auto Set Up fu nction . Bef ore y ou start … • T u rn on the VCR and the TV . • Set the TV to th e video ch annel.
Getting Started 25 Selecting a language Tip • If you want to retur n to the previous menu, highlight RE TU R N and press OK. Note • The menu disappe ar s automatically if yo u don ’ t proce ed fo r mo re t ha n a few minutes. 3 Press M / m / < / , to highlig ht the desir ed language, t hen press OK.
26 Presetting channels Presetting c h annels If som e chan nels coul d not be preset us ing the Auto S et Up functio n, you can preset them manu ally . Bef ore y ou start … • T u rn on the VCR and the TV . • Set the TV to th e video ch annel. 1 Press MENU, then press M / m to highlig ht SETTINGS and press OK.
Getting Started 27 Presetting channels 2 Pre ss M / m to hi g h li g ht T UN E R, t he n pr e ss OK. 3 Press M / m to highlig ht NORMAL/CA TV , then press OK. 4 Press M / m to high light NORMAL, then press O K. T o preset CA T V (Cabl e T elevision) channels, select CA TV .
28 Presetting channels 7 Press M / m repeatedl y until t he channel y ou want is display ed. The channels app ear in the following order : • VHF E2 - E12 • VHF Italian channel A - H • UHF E21 - .
Getting Started 29 Presetting channels If the p icture is not c lear Normally , th e Auto Fine T uning (AFT) funct ion automatic ally tune s in channels clear ly . Howev er, if the pictur e is not clear, you may also use t he ma nual tuning functi on.
30 Changing/disabling prog ramme positions Changing /dis abli ng pr ogramme positi ons After setting the chann els, you can c hange the program me positio ns as you li ke. If a ny prog ramme po sition s are u nused or conta in unwanted chan nel s, you can disab le them.
Getting Started 31 Changing/disabling programme positions Tip • If you want to retur n to the previous menu, highlight RE TU R N and press OK. Note • The menu disappe ar s automatically if yo u don ’ t proce ed fo r mo re t ha n a few minutes.
32 Changing/disabling prog ramme positions Disabli ng unwanted progr amme positions After presett in g ch annels, you can disable unus ed pr ogramme po si tions. The di sabled positions will be skipped la ter when you press the PROG +/ – butto ns. Bef ore y ou start … • T u rn on the VCR and the TV .
Getting Started 33 Changing/disabling programme positions Tip • If you want to retur n to the previous menu, highlight RE TU R N and press OK. Notes • The menu disappe ar s automatically if yo u don ’ t proce ed fo r mo re t ha n a few minutes. • Be sure to sele ct the prog ramme position you want to disa bl e co rrectly .
34 Changing/disabling prog ramme positions Changing the s tation names (not a vai lable on SL V -SE100A1/ A2) Y ou can change o r enter the st ation names (up to 5 characters). The VCR must receiv e channel information (for instance, SMAR TLINK inf ormation) for statio n names to appear automatically .
Getting Started 35 Changing/disabling programme positions Tip • If you want to retur n to the previous menu, highlight RE TU R N and press OK. Notes • The menu disappe ar s automatically if yo u don ’ t proce ed fo r mo re t ha n a few minutes. • If you en ter a sym bol in step 5, it will appe ar as a blank space i n the disp lay window .
36 Setting the P A Y -TV/Canal Plus decoder (not avai lable on SL V -SE100 A1/ A2 and SE200V1/V2) Setting th e P A Y-TV/Canal Plus decoder (not av ailabl e on SL V -SE100A1/A2 and SE200V1/V 2) Y ou can watch or record P A Y - T V / C ana l Plus programmes if you con nect a decoder (not supplie d) to the VCR.
Getting Started 37 Setting the P A Y -TV/Canal Plus decoder (not avail able on SL V -SE1 00A1/A2 and SE200V1/V2) Setting P A Y-TV/Canal Plus channels T o watch or r ecord P A Y -TV/C anal Plus progra mme s, set your VCR to receive the channel s using the on-screen d isplay .
38 Setting the P A Y -TV/Canal Plus decoder (not avai lable on SL V -SE100 A1/ A2 and SE200V1/V2) 4 Press M / m to highlig ht DECODER, the n press OK. 5 Press MENU to e xit the me nu. The menu disa pp ears from the TV screen. 6 Press MENU again . Then press M / m to highlig ht S ETTINGS and press OK.
Getting Started 39 Setting the P A Y -TV/Canal Plus decoder (not avail able on SL V -SE1 00A1/A2 and SE200V1/V2) 9 Press M / m to high light NORMAL, then press O K. T o preset CA T V (Cabl e T elevision) channels, select CA TV . 10 Pre s s PR O G +/ – to select the desired program me positio n.
40 Setting the P A Y -TV/Canal Plus decoder (not avai lable on SL V -SE100 A1/ A2 and SE200V1/V2) Tip • If you want to retur n to t he pr e vious menu , highl ig ht RET U R N and press OK. Notes • The men u disappea rs aut omatica lly if y ou don ’ t proc eed for m ore than a few minutes.
41 Play ing a tape Basic Oper ations Basic O perations Playing a tape 1 T urn on your TV and set it to the vide o channel. 2 Insert a tape. The VCR turns on and st art s playing automatica lly if you in sert a tape wi th its safety tab remo ved.
42 Play ing a tape Additio nal task s T o play an NTSC-recor ded tape (no t av ai lable on S L V -S E 100A1 /A2) Set NTSC P B at the rear of the VCR acc ording to the colour system of your T V . T o use the time counter Press CLEAR at th e point o n the tape that yo u want to fi nd later .
43 Play ing a tape Basic Oper ations Notes • The counte r rese ts to “ 0: 00: 00 ” when e v er a ta pe is rei nserted. • The cou nt er sto ps co unting when it com e s to a por tion with no record ing . • The tim e coun ter doe s not a ppear o n the TV s creen w hen usi ng an N TSC* 1 -recorde d tape.
44 Recording TV programmes Recor ding TV pr ogrammes 1 T urn on yo ur TV a nd set i t to the video channel . T o reco rd from a decoder , turn it o n. 2 Insert a tap e with its safety tab in pla ce.
45 Recording TV programmes Basic Oper ations T o stop recording Press x STOP. T o check th e remain ing time Press DISPLA Y . W ith the display on, press COUNTER/REMAIN to check the remaining time. Each time you press COUNTER/REMAIN, the time counter and the remaining ti me appea r alternately .
46 Recording TV programmes T o save a r ecording T o prev ent accid ent al erasure, break off the safety tab as i llustrated. T o record on the same tape again, cov er the tab h ole with ad hesiv e tape. Tips • T o select a pr ogra mme position , yo u ca n use the progr amme number buttons on the rem ot e commande r .
47 Recording TV programmes Basic Oper ations Recordi ng what y ou are watching on the TV (TV Direct Rec) (not a va ilable on SL V -SE100A1/A2) If you use th e SM ART LINK conn ection, you can easil y record what you are watching on the TV (other tha n tapes be ing play ed on the VCR).
48 Recording TV programmes using the Dial Timer (SL V -SE300D1/D2, SE450D/P , and SE480D only) Recor ding TV pr ogrammes us in g the Dial Timer (SL V -SE300D1/D2, SE450D/ P , and SE480D only) The Dial Timer functi on allows you to make timer rec ordings of pr ogrammes with out turn i ng on your TV .
49 Recording TV programmes using the Dial Timer (SL V -S E300D1/ D2, SE450D/P , and SE480D only) Basic Oper ations 2 T urn DIAL TIMER to set th e recording d ate. 3 Press DIAL TIMER. “ ST A R T ” and the curre nt t i me app ear al ternately in the displ ay wi n do w .
50 Recording TV programmes using the Dial Timer (SL V -SE300D1/D2, SE450D/P , and SE480D only) T o return to the previ ous step T o return to the previous step, pre ss the PR OG R AM + an d – b uttons on the VCR at the same tim e during an y of the Dial T imer settings.
51 Recording TV programmes using the Dial Timer (SL V -S E300D1/ D2, SE450D/P , and SE480D only) Basic Oper ations T o use the VCR after setting the timer T o use the VC R be fo re a re c ord in g b egi ns, just pre ss ? / 1 . The indicator turns of f and the VCR switc hes on.
52 Recording TV programmes using the Dial Timer (SL V -SE300D1/D2, SE450D/P , and SE480D only) About the Demonstration Mod e The Dial Timer function has a Demon s t r ation Mode that allows the user , such as a salesperson, to enter more th an eight e xamples o f timer setti ngs when dem onstrating the use o f the Dial T imer .
53 Recording TV programmes using the ShowView system (not availab le on SL V -SE100A1/A2) Basic Oper ations Recor ding TV pr ogrammes using th e Sho wVie w system (not a v ailabl e on SL V -SE100A1/A2) The Sho wV ie w sy stem is t he f eatu re th at simplif ies prog ra mming the VCR to make timer record ings.
54 Recording TV programmes using the ShowVie w system (not av ailable on SL V -SE100A1/A2) 1 Press TIMER. • When you set TIMER OPTIONS to VA R I A B L E : The TIMER METHOD menu appears on the TV screen. Press M / m to select SHO WVIEW , then press OK.
55 Recording TV programmes using the ShowView system (not availab le on SL V -SE100A1/A2) Basic Oper ations T o stop recording T o stop the VCR while recording, pre ss x STOP. Daily /w eek l y recor ding In ste p 4 a bove , pr ess m to select the recording pat tern.
56 Recording TV programmes using the ShowVie w system (not av ailable on SL V -SE100A1/A2) T o record sa tellite br oadcasts If you conn ect a satellite tuner and the VCR, you can record satellite programmes . T o use the VCR after settin g the timer T o use the VCR before a recording begins, just press ? / 1 .
57 Recording TV programmes using the timer Basic Oper ations Recor ding TV pr ogramme s using the t imer Y ou can preset a total of eight prog rammes, including settings made with other timer method s. Bef ore y ou start … • Check th at the VCR cloc k is set to th e correct time and date.
58 Recording TV programmes using the timer 1 Pre ss TIMER. F or SL V -SE10 0A 1 /A 2 : The TIMER men u app ears on the TV screen. F or SL V -SE20 0V1 / V 2 , SE25 0D / P , SX250D, SE300D1/D2, SE450D/P , and SE480D: • When you set TIMER OPTIONS to VA R I A B L E : The TIMER METHOD menu appears on the TV screen.
59 Recording TV programmes using the timer Basic Oper ations T o stop recording T o stop the VCR while recording, pre ss x STOP. Daily /w eek l y recor ding In ste p 2 a bove , pr ess m to select the recording pat tern. Each time you pr ess m , t he indicatio n c han ge s as sho wn below .
60 Recording TV programmes using the timer Notes • When se tting the timer wi th VPS/PDC * 3 signals, enter the start and stop times exactly as indicate d i n the TV pr ogramme guide.
61 Pla ying/searching at various speeds Additiona l Operations Additio nal Ope ratio ns Pla ying/sear ching at v arious speed s Pla ybac k opt ions Operatio n V iew the pict ure during fast- forward or re wind During fast-forw ard , ho ld down M FF/ M .
62 Play ing/searching at various speeds T o resume normal playb ack Press H PLA Y. Tip • Adjust the pi ct ure using the TRA CKING +/ – but tons if: – Streak s appe a r whil e pl a yin g in slo w motion. – Ban ds appea r at the top o r b o t tom whil e pausin g.
63 Setting the recording dur ation time Additiona l Operations Set tin g the rec o rding du rat ion time T o extend the du ration Press z REC repeatedly to set a ne w duration tim e. T o cancel the duration Press z REC repeatedly u ntil th e ind ica tor disap pea rs and th e VCR re turns to the normal rec ording mode.
64 Synchronized Recording (SL V -SE300D1/D2 and SE480D only) Sync hron ized Rec or ding (SL V -SE300D1 /D2 and SE4 80D only) Y ou can set the VCR to aut oma tically record programmes from eq uipment such as a satellite tuner b y connectin g the equip ment to the DECODER/LINE-3 IN connector .
65 Synchronized Recording (S L V -SE300D1/ D2 and SE480D only) Additiona l Operations T o cancel the Sync hronized Recor ding function Press SYNCHRO RE C. The SYNCHRO REC button turns off. T o stop recording Press x STOP while reco rdin g. Recordi ng pr ogrammes using the Synchr onized Recordi ng function Bef ore yo u start.
66 Synchronized Recording (SL V -SE300D1/D2 and SE480D only) Notes • Thi s fu nc tion may not work w i th some ty p es of sa te llite tu n e rs. • Some T Vs or other eq uipment with timer funct ions will automa tically turn off if no ope ration is perform ed within a certa i n am ount of time.
67 Checking/changing/cancelling timer settings Additiona l Operations Chec king/c hangin g/cancel ling time r settings Bef ore y ou start … • T u rn on your TV and set it to th e vi deo channel . 1 Press ? / 1 to turn on the VCR. 2 Press MENU, then pre ss M / m to h ighlight LISTS an d press OK.
68 Checking/changing/cancelling timer settings When the tim er settings o verlap The program me that st arts first has priority and the second programme starts recording only after the f irst programme has finished. If th e programmes start at the same time, the program me listed f irst in the m enu has prio rity .
69 Searching using t he Smart S earch function Additiona l Operations Sear chin g using th e Smart Searc h funct ion If you record multiple program m es on a tape , use the Sm art Search functio n to see what has been record ed on your tape.
70 Searching using the Smar t Sea rch function T o stop sear ching Press x STOP . T o e xit the SMART SEARCH screen Press SMA R T SEARCH. T o record in a bla nk space Blank space o n the tape will appear as a blank r ow in the SMAR T SEARCH screen. Sele ct the last blank row in step 3, then press OK.
71 Searching using t he Smart S earch function Additiona l Operations Tips • Y ou can store inf orm a tion for up to 24 programme s on a sing le li st. • While re cording, you can di splay the SMAR T SE ARCH screen using t he SMAR T SE ARCH button.
72 Adjusting the picture Adjusting the pi cture Adjusting t he tracki ng Although th e VCR automatic ally adjusts th e tracking when pl aying a tape (the indicator flashes in the displa y windo w , then turns of f), distorti on may o ccur if the re cording is in poor condition .
73 Adjusting the picture Additiona l Operations Tip • T o set tr ac ki ng t o the cen t re positi on, press t he TRA CKING + and – b u ttons at t he same tim e. Notes • Y ou can ad ju s t th e tr acki n g fo r an NTSC* 1 -recorded tape but the t rac king meter won ’ t be disp laye d.
74 Changing menu options Changing men u opti ons Men u choice s Initial settin gs are indic ated in bold p rint. OPTIONS-1 1 Press MENU, then selec t OPTIONS and pre ss OK. 2 Press M / m to highlight OPTIONS-1 or OPTIONS-2, then press OK. 3 Press M / m to select t he option, then press OK.
75 Changing menu options Additiona l Operations OPT IONS -2 Note • When you set a ti mer recor din g, th e indica tor s in the displ ay windo w remain on, e v e n though PO WER SA VE is set to ON.
76 Editing with another VCR Editin g with an other VCR How to con n e c t to re c ord on this VC R Conne ct the line out puts of the othe r VCR to the LINE IN conn ector or jacks of t his VCR. Ref er to the examples A thro ugh C and choose t he connection th at best suits your VCR.
77 Editing with another VCR Additiona l Operations Example C Notes • Make sure you conn ec t the plugs to jacks of the sam e colour .* 1 • If you co nne c t this VCR to both the L INE IN and LINE OU T jacks of th e ot her VCR, select the inpu t c orre ctly to prevent a humming no ise.
78 Editing with another VCR Operation (when recor ding on this VCR) Bef ore y ou start editing • T urn on your TV a nd set it to the video channe l. • Press INPU T SELECT to displa y the con nected line in the di splay window . • Press SP/LP to select the t ape speed, SP o r LP *.
79 T r oub lesh oot ing Additiona l Informa tion Additio nal Inf o r mati on T r oubl eshooting If you ha ve any question s or p roblems not c ov ered belo w , pl ease c onsult yo ur ne arest Son y service facilit y . Symptom Remedy Pow e r The ? / 1 ON/ST AND BY swi tch does n ot f uncti on.
80 T roubleshooting Recording No TV pr ogra m me appears on the TV scre en. • Make sure the TV is set to the vid eo cha nne l. If you a re using a monitor , set it to video input. • If your T V is co nnected to th e VCR with bot h S c art and aeria l cables, m ake sure the RF channel i s set to OFF (se e page 15) .
81 T r oub lesh oot ing Additiona l Informa tion Synchr onized Recor ding The SYNCHR O REC button turns off while recordin g or doe s not go back to record ing standby mode. • The tape has re ac he d it s end. Inser t a ne w tape an d pre ss SYNCHRO REC aga in.
82 T roubleshooting Other s A tape cannot be inserted. • Check that a tape isn ’ t alread y in the tape c ompartme nt. The remo te comma nde r does not function. • Make sure yo u are poi nting th e remote commande r at the remote sensor on the VCR.
83 Specifications Additiona l Informa tion Specification s System Channel cover age PA L ( B / G ) VHF E2 to E12 VHF Italian channel A to H UHF E21 to E69 CA TV S01 to S05, S1 to S20 HYPER S21 to S41 RF output signal UHF channels 21 t o 69 Aerial out 75-ohm asymmetrical aerial socket T ape speed SP: P AL 23.
84 Inde x to par ts and controls Inde x to par t s an d contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel A ? / 1 ON/ST AND BY switch (13) B A EJECT bu tton (42) C T a.
85 Index t o par ts and controls Additiona l Informa tion Displa y w indo w A T imer indicator (50) (55) (59) B T ape spee d indi cators * 1 (45) C VIDEO indicator (10) (45) D VPS (V ideo Pro gramm e .
86 Inde x to par ts and controls Rear panel A Mains lead (9) (10) B AERIAL IN ANTENNE ENTREE connector (9) (10 ) C AERIAL OUT ANTENNE SOR TIE connector (9) (10) D DECODER/ t LINE -2 IN DECODEUR/ t ENT.
87 Index t o par ts and controls Additiona l Informa tion Remote commander A Z EJECT b utton (42) B COUNTER/REMAIN bu tton (45) C CLEA R b u tton (42) ( 54) (68) D SP (S tandard P lay)/LP ( Long Pl ay.
88 Inde x to par ts and controls L [TV] / [VIDE O] re mote control swit ch (5) M ? / 1 (o n/standb y) switch (6) (55) N INPUT SELECT b utton (46) (58 ) (78) O t TV/VIDEO button (6) (10) (45) P DISPLA .
89 Index t o par ts and controls Additiona l Informa tion.
90 Inde x to par ts and controls.
91 Index t o par ts and controls Additiona l Informa tion.
Sony Corp or ation Inde x A Adju sting picture 29 , 72 tracking 72 Aerial hookup 9 AFT (Aut o Fin e Tuning) 29 Auto Cloc k Set 22 Auto Long Play 74 Auto S e t Up 16 C Canal Pl us 36 Chan gi ng th e pr.
An important point after buying a device Sony SLV-SE200V1/V2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony SLV-SE200V1/V2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony SLV-SE200V1/V2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony SLV-SE200V1/V2 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony SLV-SE200V1/V2 will certainly help you make a decision on the purchase.
If you already are a holder of Sony SLV-SE200V1/V2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony SLV-SE200V1/V2.
However, one of the most important roles played by the user manual is to help in solving problems with Sony SLV-SE200V1/V2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony SLV-SE200V1/V2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
