Instruction/ maintenance manual of the product SLV-SE10EE Sony
Go to page of 56
Video Cassette Recor der ©1999 by Son y Cor poration SL V -SE40EE SL V -SE10EE Operating Instructions 3-865-175- 12 (1) P AL NTSC 4.43.
Introduction 2 WARNING T o pr event fire or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified a personnel only . Mains lead must only be changed at a qualified service shop.
3 Introduction T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 8 Step 3: Connecting the VCR 10 Step 4: T uning your TV to the VCR 12 S.
Getting Started 4 Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • Remote commander • R6 (size AA) batteries • Aerial cable Checking your model name The instructions in this manual are for the 2 models: SL V -SE40EE and SE10EE.
5 Getting Started Getting Started Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.
Getting Started 6 Step 2 : Setting up the remote commander (continued) … TV/VIDEO I/ u DISPLA Y Á +/– TV control buttons To T urn the TV into standby mode Select an input source of the TV either .
7 Getting Started Getting Started Notes • W ith normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, r emove the batteries to avoid possible damage from battery leakage.
Getting Started 8 Step 3 Connecting the VCR : Signal flow AERIAL IN Aerial cable (supplied) AERIAL IN AERIAL OUT to mains 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the VCR. 2 Connect AERIAL OUT of the VCR and the aerial input of your TV using the supplied aerial cable.
9 Getting Started Getting Started Additional connections This additional connection improves picture and sound quality . If your TV has LINE IN connector , connect your TV by using audio/video cable as shown on the right. Whenever you want to watch the VCR picture, press … TV/VIDEO to display the VIDEO indicator in the display window .
Getting Started 10 Step 4 T uning your TV to the VCR 1 Press I / u ON/ST ANDBY to turn on the VCR. 2 Press RF CHANNEL on the VCR lightly . The factory-preset RF channel appears in the display window . The VCR signal is output through this channel to the TV .
11 Getting Started Getting Started 5 Press PROGRAM +/– (r epeatedly) to select the appropriate TV system for your ar ea. Select “G” for the B/G TV system, or “K” for the D/K TV system. 6 T une the TV to the same channel as that shown in the display window so that the picture on the right appears clearly on the TV screen.
Getting Started 12 Step 5 Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. W ith this function, you can set the TV channels guided by the sequence indicated on the TV screen.
13 Getting Started Getting Started Setting the clock Y ou must set the time and date on the VCR to use the timer r ecording features properly . Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. 1 Press MENU, then pr ess > / .
Getting Started 14 4 Press / to highlight the month and set the month pressing > / . . 5 Set the year , hour , and minutes in sequence, pressing / to highlight the item to be set, and press > / . to select the digits. The day of the week is set automatically .
15 Getting Started Getting Started Selecting a language Y ou can change the on-screen display language from the one you selected with the Auto Set Up function. Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. 1 Press MENU, then pr ess > / .
Getting Started 16 Pr esetting channels If some channels could not be preset using the Auto Set Up function, you can preset them manually . Before you start… • T urn on the VCR and the TV . • Set the TV to the video channel. PROG +/– > / . / ? / / OK MENU 1 Press MENU, then pr ess > / .
17 Getting Started Getting Started Selected programme position 3 Press > / . to highlight NORMAL/ CA TV , then press OK. 4 Press > / . to highlight NORMAL, then press OK. T o preset CA TV (Cable T elevision) channels, select CA TV . 5 Press PROG +/– to select the programme position.
Getting Started 18 Presetting channels (continued) 7 Press > / . r epeatedly until the channel you want is displayed. The channels appear in the following order: B/G TV system Channel number in the.
19 Getting Started Getting Started Disabling unwanted programme positions After presetting channels, you can disable unused pr ogramme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. 1 In step 7 above, press > / .
Getting Started 20 1 Press MENU, then pr ess > / . to highlight LISTS and press OK. 2 Press > / . to highlight CHANNEL LIST , then press OK. Changing/ disabling pr ogramme positions After setting the channels, you can change the programme positions as you like.
21 Getting Started Getting Started 3 Press > / . to highlight the row on which you want to change the programme position, then pr ess / . T o display other pages for programme positions 6 to 60, press > / . repeatedly . 4 Press > / . until the selected channel row moves to the desired pr ogramme position.
Getting Started 22 Disabling unwanted programme positions After presetting channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. Before you start… • T urn on the VCR and the TV .
23 Getting Started Getting Started 2 Press > / . to highlight CHANNEL LIST , then pr ess OK. 3 Press > / . to highlight the row on which you want to disable. 4 Press CLEAR. The selected row will be clear ed as shown on the right. 5 Repeat steps 3 and 4 for any other programme positions you want to disable.
Basic Operations 24 Basic Operations Playing a tape 6 EJECT 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 Press · PLA Y . When the tape reaches the end, it will r ewind automatically .
Basic Operations Basic Operations 25 Set NTSC PB to ON P AL TV NTSC 4.43 Additional tasks To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape Press p S.
Basic Operations 26 Notes • T apes recorded in the LP mode can be played back on this VCR (SL V -SE40EE only). • The counter r esets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no r ecording.
Basic Operations Basic Operations 27 Recor ding TV pr ogrammes r REC PROG +/– SP/LP (SL V- SE40EE only) 1 T urn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 Press INPUT SELECT until a pr ogramme position number appears in the display window .
Basic Operations 28 Recording TV pr ogrammes (continued) 5 SL V -SE40EE only: Press SP/LP to select the tape speed, SP or LP . LP (Long Play) provides recor ding time twice as long as SP , however , SP (Standard Play) pr oduces better picture and audio quality .
Basic Operations Basic Operations 29 Safety tab T o watch another TV programme while recor ding 1 Press … TV/VIDEO to turn off the VIDEO indicator in the display window . 2 Select another programme position on the TV . T o save a recording T o prevent accidental erasur e, break off the safety tab as illustrated.
Basic Operations 30 1 Press TIMER. The TIMER menu appears on the TV screen. MENU Recor ding TV pr ogrammes using the timer Y ou can preset up to eight pr ogrammes at a time. Before you start… • Check that the VCR clock is set to the correct time and date.
Basic Operations Basic Operations 31 TODA Y n SUN-SA T (Sunday to Saturday) n MON-SA T (Monday to Saturday) n MON-FRI (Monday to Friday) n SA T (every Saturday) .
Basic Operations 32 T o use the VCR after setting the timer T o use the VCR before a timer recor ding begins, just press I / u . The indicator turns of f and the VCR switches on. Remember to press I / u to reset the VCR after using the VCR. Y ou can also do the following tasks while the VCR is recording: • Reset the counter .
33 Additional Operations Additional Operations Playing/sear ching at various speeds Playback options V iew the picture during fast-forward or r ewind Play at high speed Play in slow motion Play frame by frame Rewind and start play & SLOW Operation During fast-forward, hold down )# FF .
Additional Operations 34 T o resume normal playback Press · PLA Y . Tip • Adjust the pictur e using the TRACKING +/– buttons if: – Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing.
35 Additional Operations Setting the recor ding duration time After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. 1 While recor ding, press r REC. The indicator appears in the display window .
Additional Operations 36 1 Press I / u to turn on the VCR. 2 Press MENU, then pr ess > / . to highlight LISTS and press OK. 3 Press > / . to highlight TIMER LIST , then press OK: • If you want to change or cancel a setting, go on to the next step.
37 Additional Operations Programme 1 Programme 2 Programme 1 Programme 2 about 20 seconds will be cut off will be cut off 4 Press > / . to select the setting you want to change or cancel, then press OK. The selected setting appears in the TIMER menu.
Additional Operations 38 Sear ching using the Smart Sear ch function If you recor d multiple programmes on a tape, use the Smart Sear ch function to see what has been recor ded on your tape. Y ou can see information such as date, time, and channel of programmes recor ded on a tape.
39 Additional Operations T o stop searching Press p ST OP . T o exit the SMART SEARCH screen Press SMAR T SEARCH. T o record in a blank space Blank space on the tape will appear as a blank row in the SMAR T SEARCH screen. Select the blank r ow in step 3, then press OK.
Additional Operations 40 Searching using the Smart Sear ch function (continued) AB C AD C Tips • Y ou can store information for up to 24 pr ogrammes on a single list. • While r ecording, you can display the SMAR T SEARCH screen using the SMAR T SEARCH button.
41 Additional Operations Adjusting the pictur e Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window , then goes off), distortion may occur if the tape was recor ded in poor condition.
Additional Operations 42 Tip • T o set tracking to the centre position, pr ess the TRACKING + and – buttons at the same time. Notes • Y ou can adjust the tracking for the NTSC-recor ded tape but the tracking meter won’t be displayed. • W ith the Auto Long Play function on, the OPC function will work only in SP mode.
43 Additional Operations Changing menu options 1 Press MENU, then select OPTIONS and press OK. 2 Press > / . to select the option, then press OK. 3 Press > / . to change the setting, then press OK. 4 Press MENU to r eturn to the original screen.
Additional Operations 44 Editing with another VCR How to connect to recor d on this VCR Notes • Make sur e you connect the plugs to jacks of the same colour .
45 Additional Operations Operation (when recor ding on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT to display “L1” in the display window . • Press SP/LP to select the tape speed, SP or LP (SL V -SE40EE only).
46 Additional Information T roubleshooting If you have any questions or problems not cover ed below , please consult your nearest Sony service facility . Additional Information Clock Symptom The I / u ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate.
47 Additional Information Symptom The picture r olls vertically during picture sear ch. The picture has no sound. No TV programme appears on the TV screen. TV reception is poor . The tape starts playing as soon as it is inserted. The tape is ejected when you press r REC.
48 Additional Information Symptom A tape cannot be inserted. The remote commander does not function. The tracking meter does not appear on the TV screen. The VCR needs to be cleaned. Others Remedy • Check that a tape isn’t alr eady in the tape compartment.
49 Additional Information Specifications System Channel coverage P AL (B/G, D/K) VHF E2-E12, R1-R12 UHF E21-E69, R21-R69 CA TV S1-S41, S01-S05 RF output signal UHF channels 21 to 69 Aerial out 75-ohm .
50 Additional Information Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 8 r REC (recor d) button (28, 35, 45) 9 Remote sensor (5) !º AUTO SET U.
51 Additional Information Display window 1 T imer indicator (31) 2 T ape speed indicators (SL V -SE40EE only) (28) 3 VIDEO indicator (9, 29) 4 OPC (Optimum Picture Contr ol) indicator (41) 5 Tracking .
52 Additional Information Index to parts and controls (continued) Rear panel 1 Mains lead (8) 2 LINE-1 IN VIDEO/AUDIO jacks (44) 3 AERIAL IN ANTENNE ENTREE connector (8) 4 AERIAL OUT ANTENNE SOR TIE c.
53 Additional Information Remote commander 1 6 EJECT button (25) 2 CLEAR button (23, 37) 3 DISPLA Y button (28) 4 . (volume) +/– buttons (for TV) (6) 5 COUNTER/REMAIN button (28) 6 SP (Standar d Pla.
54 Additional Information !¡ … TV/VIDEO button (6, 29) !™ I / u (on/standby) switch (6, 31) !£ AUDIO MONITOR button (SL V - SE40EE only) (6) !¢ TV / VIDEO remote contr ol switch (5) !∞ PROG (.
.
A, B Adjusting picture 19, 41 tracking 41 Aerial hookup 8 AFT (Auto Fine T uning) 19 Auto Set Up 12 Auto Long Play 43 C Changing the programme position 20 Cleaning the video heads 46 Clock setting 13 Colour system compatible colour systems 2 setting 25 Connecting the VCR and your TV 8 Counter 25 D Disabling the programme position 19 Dubbing.
An important point after buying a device Sony SLV-SE10EE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony SLV-SE10EE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony SLV-SE10EE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony SLV-SE10EE you will learn all the available features of the product, as well as information on its operation. The information that you get Sony SLV-SE10EE will certainly help you make a decision on the purchase.
If you already are a holder of Sony SLV-SE10EE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony SLV-SE10EE.
However, one of the most important roles played by the user manual is to help in solving problems with Sony SLV-SE10EE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony SLV-SE10EE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
