Instruction/ maintenance manual of the product PFV-SP3100 Sony
Go to page of 16
SIGNAL PROCESSING UNIT PFV-SP3100 BACKUP POWER SUPPLY UNIT HK-PSU01 INST ALLA TION MANUAL 1st Edition Serial No. 10001 and Higher (PFV -SP3100) Serial No.
PFV -SP3100 ! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
1 (E) PFV -SP3100 Table of Contents Manual Structure Purpose of this manual ........................................................................................ 2 (E) Related manuals ................................................................
2 (E) PFV -SP3100 Manual Structure Purpose of this manual This manual is the installation manual of Signal Processing Unit PFV-SP3100 and its Backup Power Supply Unit HK-PSU01. This manual is intended for use by trained system and service engineers, and describes the information for installation of the unit.
1-1 (E) PFV -SP3100 Section 1 Installation 1-1. Operating Environment Operating temperature + 5 d C to + 40 d C Performance temperature + 10 d C to + 35 d C Humidity 10 to 90 % (No condensation) Mass: PFV-SP3100 Approx. 8.5 kg (Without the optional unit and board) HK-PSU01 Approx.
PFV -SP3100 1-2 (E) 1-3. Installation Space m . Do not block the ventilation holes of the unit. . Both of the front and rear sides must be at least 20 cm away from the walls for ventilation and mainte- nance. The outer dimensions of PFV-SP3100 are as shown here: 1-3.
1-3 (E) PFV -SP3100 1-4. Installing/Removing Optional Power Supply Unit w Before installing the backup power supply unit HK-PSU01 in PFV-SP3100, set the power switch of HK-PSU01 to the “O” position (OFF). Otherwise, deterioration of a connector which connects HK-PSU01 to PFV-SP3100 may cause a fire.
PFV -SP3100 1-4 (E) 1-5. Installing Optional Board 1-5. Installing Optional Board The optional board can be installed in any empty slot of PFV-SP3100. When installing the processing module controller, the No.4 slot is used as the master slot and the No.
1-5 (E) PFV -SP3100 Board lever Main board 2 6. Reinstall the board retainer. 7. Reinstall the front panel. n When removing the main board, turn the board lever in the direction of the arrow 2 , and pull out the board toward you. Installing Connector Panel (Rear side) The connector panel must be installed to the slot which contains the main board.
PFV -SP3100 1-6 (E) 1-6. Rack Mounting n Install a ventilating fan in the rack to prevent the increase in the temperature inside a rack when multiple units are put in one rack. 1-6-2. Rack Mounting Procedure Explains the procedure for rack mounting by Rack Mount Kit RMM-10.
1-7 (E) PFV -SP3100 n The maximum depth of an adaptor is 750 mm. The minimum depth of an adaptor is 595 mm. 3. Firmly lay the right and left adaptors in the rack with the specified six screws. (Following figure is case of left side.) 4. Fasten the length adjustment screws which are loosened in step 2.
PFV -SP3100 1-8 (E) 1-7. Matching Connector/Cable When external cables are connected to the connectors on the PFV-SP3100 rear panel, the hardware listed below (or the equivalent) must be used.
2-1 (E) PFV -SP3100 Section 2 Service Overview 2-1. Cleaning the Filter w Be sure to turn off the power switch and disconnect the power cord from the outlet before starting any work. c . The temperature inside the unit increases if dust adheres to the filter and the ventilation holes are blocked.
.
PFV -SP3100 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual o.
Printed in Japan Sony Corporation 2002. 7 22 B&P Company ©2002 PFV -SP3100 (SY) J, E 3-690-471-01.
An important point after buying a device Sony PFV-SP3100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony PFV-SP3100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony PFV-SP3100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony PFV-SP3100 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony PFV-SP3100 will certainly help you make a decision on the purchase.
If you already are a holder of Sony PFV-SP3100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony PFV-SP3100.
However, one of the most important roles played by the user manual is to help in solving problems with Sony PFV-SP3100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony PFV-SP3100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
