Instruction/ maintenance manual of the product HGMSZ Bacharach
Go to page of 5
NEW STYLE HGMSZ TECHNICAL SUPPORT NOTES FOR ALL SERIAL NUMBER STARTING WITH NU XXX AND ABOVE (JULY 2008) <4000> Zero Fault – IR Voltage out of tolerance <4200> Zero Fault and Gain set Fa.
GAIN SET FAULT (CODE 200) HGMSZ (3015-4200) Gain set fault occurs when the Digipot setting is outside of acc eptable lim its. For the AGMSZ (3015-4280) Ammonia single zone monitor the Digipot m ay be as low as 20.
RESET TO DEFAULT SETTINGS Press and hold the DEFAULT button (located ab out one inch above th e 4-20mA dc output connector), cycle power holding the DEFAULT button in. A single long “beep” will be heard. – release the button afte r the “beep” stops.
PRESSURE READINGS FOR THE HGMSZ Codes 800, 1000 and 1800 FIRST DIAGNOSTIC SCREEN Zone Pressure (0.06 psi below ambient) Maximum 2.7 PSIA 4.26500V <0000> 24.5Cd 14.00psi Press left arrow key Revised 6/5/08 P. M. Pape Purge Pressure (0.03 psi below ambient) Maximum 2.
Revised 6/5/08 P. M. Pape WHOM TO CALL AT THE FACTORY FOR REFRIGERANT GAS LEAK MONITOR ASSISTANCE PHONE NUMBER: 800-888-6400 X 2478 FAX NUMBER: 678-423-2479 E-MAIL: Peter Pape: x2478, peterp@bacharach-inc.com Bacharach, Inc., help@bacharach-inc.com SHIPPING ADDRESS: BACHARACH, INC.
An important point after buying a device Bacharach HGMSZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bacharach HGMSZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bacharach HGMSZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bacharach HGMSZ you will learn all the available features of the product, as well as information on its operation. The information that you get Bacharach HGMSZ will certainly help you make a decision on the purchase.
If you already are a holder of Bacharach HGMSZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bacharach HGMSZ.
However, one of the most important roles played by the user manual is to help in solving problems with Bacharach HGMSZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bacharach HGMSZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
