Instruction/ maintenance manual of the product LMD-2030W Sony
Go to page of 24
3-113-855- 11 (1) LCD Monitor © 2007 Sony Corporation LMD-2030W Operating Instructions.
2 Owner’ s Recor d The model and serial numbers are loc ated at the rear. Record these numbers in th e spaces provided be low. Refer to these numbers wh enever you call upon your Sony dealer regarding t his product. Model No. __ __________ ________ Serial No.
3 Attention-when the product is installed in Rack: 1. Prevention against overloading of branch circuit When this produc t is install ed in a rack and is supplied power from an outlet on the rack, pl ease make sure th at the rack do es not overload the supply circuit.
4 T ab le of Contents T able of Contents Precaution ............ ......................... ........... 5 On Safety ................................................... 5 On Installation ........................................... 5 Handling the LCD Screen .
5 Precaution Precaution On Safety • Operate the unit only with a power source as specified in the “Specif ications” section. • A nameplate indi cating operating v oltage, etc.
6 Features On Replacing the P arts Note that if service person nel changes some parts during repair , these parts may be retained. Features The LMD-2030W (20-inch) is a multiple format LCD monitor for broadcast/professional use featur ing a precise image and h igh performance.
7 F eatures Blue only mode In the blue on ly mode, a mono chro me display is obtained with all the three R/G/ B picture e lements dri ven with a blue signal.
8 Location and Function of Parts and Controls Location and Function of P ar ts and Contr o ls Fr ont P anel a T ally lamp Y ou can check the status of the m onitor b y the color of the tally lamp. The tally lamp lights in red, green or amber depending on the setting of the REMO TE P ARALLEL menu.
9 Location and Function of Parts and Controls m LINE A button Press to monitor the signal through the LINE A input connector . n Speaker The audio signal selected by the input sele ct button ( j SDI button, k RGB/COMPONENT button, l HDMI button or m LINE A button) o n the front panel is output.
10 Location and Function of Parts and Controls Rear P anel a HDMI IN connec tor HDMI (High-Defini tion Multimedia Interf ace) is an interface that supports both video and audio on a single digital connection, allowing you to enjo y high quality digital picture and sound.
11 Installing to the Rack g LINE A connectors Line input connectors for Y/C separate, compos ite video and audio signals and their loop-through output connectors. Press the LINE A b utton to moni tor the signal input through these connectors. If you input signals to both Y/C IN and VIDEO IN, the signal input to the Y/C IN is selected.
12 Connecting the AC P ower Cord / Attaching the Input Adaptor Connecting the A C Po w e r C o r d 1 Plug the A C power cord into the A C IN socket on the rear panel. Then, attach the A C plug holder (supplied) to the A C power cord. 2 Slide the A C plug holder ov er the cord until it locks.
13 Selecting the Default Settings Selecting the Default Settings When you turn on the unit for th e first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values f or ea ch area 1 Press the POWER switch.
14 Selecting the Menu Language 4 If ASIA EXCEPT JAP AN is selected: Customers who will use this unit in the shaded are as shown in the map below shoul d select NTSC AREA. Other customers shoul d select P AL AREA. 3 Press the M or m b utton to narrow the area further and then press the , or ENTER b utton.
15 Using the Menu 4 Press the M or m b utton to select the “LANGU AGE” , then press the , or ENTER button. The selected item is displayed in yel low . 5 Press the M or m b utton to select a language, then press the ENTER button. The menu changes to the selected language.
16 Adjustment Using the Menus 3 Select a n item. Press the M or m bu tton to select the ite m, then press the , or ENTER button. The item to be changed is displayed in yellow . Note If the menu consists of multiple pages, press M or m to go to the desired menu page.
17 Adjustment Using the Menus Adjusting and Changing the Settings ST A TUS menu The ST A TUS menu is used to displa y the current status of the unit. The following items are displayed: • Signal form.
18 Adjustment Using the Menus Submenu Setting RGB/COMP SEL When a s ignal input via the RG B/ COMPONENT co nnector is be ing monitored, based on the s ignal being in put, select “R GB” or “COMP” (componen t). COMP LEVEL Select the compon ent level from among three modes.
19 T roubleshooting REMO TE P ARALLEL menu Select the P ARALLEL REMOTE connector pins for wh ich you want to change the function. Y ou can assign various functions to 1 to 4 pins an d 6 to 8 pins. The following lists the functions you can assign to the pins.
20 Specifications Specifications Picture performance LCD panel a-Si TFT Acti ve Mat rix Picture size 20.1 type 433 × 271 × 511 mm (W/H/Diagonal) (17 1 / 8 × 10 3 / 4 × 20 1 / 8 i nches) Resolution.
21 Specifications Pin assignment P ARALLEL REMO TE connector Modular connector (8-pin) F or details on function allocations, see “REMOTE P ARALLEL menu” (page 19). Wiring requi red to u se the Remote Control Connect the function you w a nt to use with a Remote Control to the Ground (Pin 5).
22 Specifications Video signal f ormats The unit is applicable to the follo wing signal formats. *1 Also supports frame rate 1/1.00 1. Applicable DVI input signals When a PC signal is input to the HDMI IN connector using a D VI conv ersion cable Note The sides of the displayed pictur e may be in visible depending on the input signal.
23 Dimensions Dimensions Fron t Rear Side Bottom 493 (19 1 / 2 ) 166.5 ( 6 5 / 8 ) 194.5 (7 3 / 4 ) 239.4 ( 9 1 / 2 ) 2.5 ( 1 / 8 ) 100 (4) 40 (1 5 / 8 ) 100 (4) 75.2 (3) 96.8 (3 7 / 8 ) 67.7 (2 3 / 4 ) 264.4 (10 1 / 2 ) 87 (3 1 / 2 ) 204.3 (8 1 / 8 ) 165.
Sony Corporation.
An important point after buying a device Sony LMD-2030W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony LMD-2030W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony LMD-2030W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony LMD-2030W you will learn all the available features of the product, as well as information on its operation. The information that you get Sony LMD-2030W will certainly help you make a decision on the purchase.
If you already are a holder of Sony LMD-2030W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony LMD-2030W.
However, one of the most important roles played by the user manual is to help in solving problems with Sony LMD-2030W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony LMD-2030W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
