Instruction/ maintenance manual of the product KV-28CL10B Sony
Go to page of 22
R 4-093-788- 61 ( 1 ) FD Trinitron Colour Television KV-28CL10B © 2003 by Sony Corporation Instruction Manual GB 00COKV28CL10B.fm Page 1 Friday, January 31, 2003 4:55 PM.
2 NOTICE FOR CUSTOMERS A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with 2 or @ ) must be used.
3 GB Introduction Thank you for choosing this Sony FD Trinitron Colour Television. Before operating the TV, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: Table of Contents Notice for Customers .
4 Safety Information Do not open the cabinet and the rear cover of the TV . Refer to qualified service personnel only . T o pr event fire or shock hazard, do not expose the TV to rain or moisture. For your own safety , do not touch any part of the TV , power lead or aerial lead during lightning storms.
5 GB Overview of Remote Control Buttons Overview 1 To Temporarily Switch Off TV: Press to temporarily switch off TV (the standby indicator on TV lights up). Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use.
6 Overview of TV Buttons Overview On/Off switch Standby indicator Programme Up or Down Buttons (Selects TV channels) Volume control buttons Video Input jack Audio Input jacks Headphones jack Auto Start Up Button Selecting Input source Push up the flap on the front of the TV to reveral the front control panel.
7 GB Connecting the Aerial and VCR Connecting cables are not supplied. Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way.
8 Language Select Language: i 4 Svenska Norsk English Nederlands Français Italiano i $ OK Country Select country: i 4 Sverige Norge - Italia Deutschland Österreich i $ OK If picture slants, please a.
9 GB Your TV is now ready for use 5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes . 6 The TV starts to automatically search and store all available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed.
10 Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1 Press the MENU button to switch the first level menu on. 2 • To highlight the desired menu or option, press or .
11 GB SOUND ADJUSTMENT The “Sound Adjustment” menu allows you to alter the sound adjustments. To do this: after selecting the item you want to alter, press , then press / / or repeatedly to adjust it and finally press OK to store the new adjustment.
12 SLEEP TIMER The “Sleep Timer” option in the “Timer” menu allows you to select a time period for the TV to switch itself automatically into the standby mode. To do this: after selecting the option press , then press or to set the time period delay (max.
13 GB continued... PROGRAMME LABELS The “Programme Labels” option in the “Set Up” menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name.
14 continued... MANUAL PROGRAMME PRESET The “Manual Programme Preset” option in the “Set Up” menu allows you to: a) Preset channels or a video input source one by one to the programme order of your choice. To do this: 1 After selecting the ”Manual Programme Preset” option, press then with Programme option highlighted press .
15 GB Menu System AUTO FORMAT The “Auto Format” option in the “Detail Set Up” menu allows you to automatically change the aspect ratio of the screen.
16 Menu System AV2 OUTPUT The “AV2 Output” option in the “Detail Set Up” menu allows you to select the source to be output from the Scart connector : 2/ q in order you can record from this Scart any signal coming from the TV or from external equipment connected to the Scart connector : 1/ or front connectors 3 and 3.
17 GB Teletext Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below.
18 Connecting Optional Equipment Using the following instructions you can connect a wide range of optional equipment to your TV set. (Connecting cables are not supplied). Connecting a VCR: To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual.
19 GB Using Optional Equipment 1 Connect your equipment to the designated TV socket, as indicated in the previous page. 2 Switch on the connected equipment. 3 To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen.
20 Specifications Additional Information TV system: Depending on your country selection: B/G/H, D/K, L, I Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E.
21 GB Troubleshooting Here are some simple solutions to the problems which may affect the picture and sound. Additional Information Problem No picture (screen is dark) and no sound. Poor or no picture (screen is dark), but good sound. No picture or no menu information from equipment connected to the Scart connector.
http://www.sony.net/ Printed in Spain Ecological Paper - Totally Chlorine Free 03BCKV28CL10B.fm Page 1 Friday, January 31, 2003 5:00 PM.
An important point after buying a device Sony KV-28CL10B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony KV-28CL10B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony KV-28CL10B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony KV-28CL10B you will learn all the available features of the product, as well as information on its operation. The information that you get Sony KV-28CL10B will certainly help you make a decision on the purchase.
If you already are a holder of Sony KV-28CL10B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony KV-28CL10B.
However, one of the most important roles played by the user manual is to help in solving problems with Sony KV-28CL10B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony KV-28CL10B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
