Instruction/ maintenance manual of the product KLV-26S200A Sony
Go to page of 36
KL V -46S200A KL V -40S200A KL V -32S200A KL V -26S200A © 2006 Sony Corporation LCD Color TV 2-891-357- 11 (1) GB KLV-40S200A 2-891-357- 11 (1) Operating Instructions Before oper ating the TV , please read the “Safety information” section of this manual.
KLV-46S200A 2-891-357- 11 (1) 2 GB • To prevent the risk of electr ic shock, if the AC power cord or plug is dam aged, do not insert the plug into the AC power outlet. This plug ca nnot be u sed and shou ld be destroyed. • To prevent the risk of fire or electric sh ock, do not expos e the TV set to rain or moistur e.
3 GB KLV-46S200A 2-891-357- 11 (1) Table of Contents Start-up Guide 4 Safety info rmation ................ ............. ............. ................ ............. ............. ............. ............. ....... 7 Overview of the remote ..........
4 GB KLV-46S200A 2-891-357- 11 (1) Start-up Guide 1: Inserting batteries into the remote Notes • Observe the correct polarity when inserting batteries. • Dispose of batteries in an e nvironmentally friendly way. Certain regions may regulate disposal of the battery.
5 GB KLV-46S200A 2-891-357- 11 (1) Start-up Guide 3: Bundling the cables 4: Preventing the TV from toppling over 5: Adjusting the viewing angle of the TV This TV can be adjusted within the angles shown below. Adjust the angle left and right (swivel) 6: Selecting the language 1 Connect the TV to the AC power outlet (110-240V AC, 50/60Hz).
6 GB KLV-46S200A 2-891-357- 11 (1) 3 Press F / f to select the language displayed on the menu screens, then press . The message confirming the TV start Auto Tuning appears on the screen, then go to “7: Auto Tuning the TV”. 7: Auto Tuning the TV After selecting th e language, a message co nfirming the TV start Auto Tuning appears on the screen.
7 GB KLV-46S200A 2-891-357- 11 (1) Safety information For Safety AC power cord Be sure to connect only the appropriate supp lied AC power cord with the plug that f its into the AC power outlet. Unplug th e AC powe r cord wh en moving the LCD TV. Do not move the LCD TV with the AC power cord plug ged in.
8 GB KLV-46S200A 2-891-357- 11 (1) Ventilation Leave space around the LCD TV. O therwise, adequate air- circulation ma y be blocked causing overheating and cause fire or dam age the LCD TV.
9 GB KLV-46S200A 2-891-357- 11 (1) Use Damage requiring service If the surface of the LCD TV cracks, do not touch it until you unplug the AC power cord. Ot he rwise electric shock may result. Servicing Do not open the cabinet and the rear cover of the LCD TV.
10 GB KLV-46S200A 2-891-357- 11 (1) AC power cord If you da mage the AC p ower cord, it may result in fire or electric shock. • Do not pinch, bend, or twis t the cable excessively. The core lines may be bared and cu t, and cause short- circuit, resulting in fire or electric shock.
11 GB KLV-46S200A 2-891-357- 11 (1) On cleaning the screen surface/cabinet • Be sure to unplug the AC power cord connected to the LCD TV from the AC powe r outlet before cleaning. • To remove dus t from the screen surface/cabinet, wipe gently with a soft cloth.
12 GB KLV-46S200A 2-891-357- 11 (1) Overview of the remote Tip The A/B, PROG + and number 5 buttons have tactile dots. Us e the tactile dots as referenc es when operating the TV. 1 "/1 – TV standby Switches off the TV temporarily. The 1 (standby) indicator on the front of the TV lights up.
13 GB KLV-46S200A 2-891-357- 11 (1) Overview of the TV buttons and indicators 1 MENU (page 17) 2 / – Input select/OK • In TV mode (page 16): Selects the input source from equipment connected to the TV jacks. • In TV menu: Selects the menu or option, and confirm the setting.
14 GB KLV-46S200A 2-891-357- 11 (1) Watching TV 1 Press 1 on the TV (top side) to switch on the TV. When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to swi tch on the TV. 2 Press the number buttons or PROG +/- to select a TV channel.
15 GB KLV-46S200A 2-891-357- 11 (1) Watching TV Picture Freeze Freezes the TV picture (e .g. to make a note of a telephone number or recipe). 1 Press on the remote control. 2 Press F / f / G / g to adjust the position of the window. 3 Press to remove the window.
16 GB KLV-46S200A 2-891-357- 11 (1) Viewing pictures from connected equipment Switch on the connected equi pment, then press repe atedly until t he correct input symbol (see below) appears on the screen.
17 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions 3 Navigating through menus “MENU” allows you to enjoy various conve nient features of this TV. Yo u can ea sily select channels or external inputs with the remote. Also, se ttings for y our TV can be changed easily using “MENU”.
18 GB KLV-46S200A 2-891-357- 11 (1) Picture menu You can select the options listed be low on the Pi cture menu. To sele ct options in “Setting s”, see “Navigating through menus” (page 17). T arget Inputs Selects whether to appl y settings made in the Picture menu to all inputs, or only to the input currently being watched.
19 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions Sharpness Sharpens or softens the picture. Noise Reduction Reduces the picture noise (snowy pict ure) in a weak broadcast signal. “Auto”: Automatically reduces the picture noise. “High”/“Medium”/“Low”: Modifies th e effect of the n oise reduction.
20 GB KLV-46S200A 2-891-357- 11 (1) Sound menu You can select the options listed below on the Sound menu. To sele ct options in “Setting s”, see “Navigating through menus” (page 17). T arget Inputs Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched.
21 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions Dual Sound Selects the sound from the speaker fo r a stereo or bilingual broadcast. The selection varies, depe nding on the Broadcasting. . Notes • If the signal is very weak, the so und becomes monaural automatically.
22 GB KLV-46S200A 2-891-357- 11 (1) Screen menu You can select the options listed below on the Screen menu. To sele ct options in “Setting s”, see “Navigating through menus” (page 17). T arget Inputs Selects whether to appl y settings made in the Screen menu to all inputs, or only to the input currently being watched.
23 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions Setup menu You can select the options listed be low on the Se tup menu. To sele ct options in “Setting s”, see “Navigating through menus” (page 17). Auto Startup Starts the “first time operatio n menu” to tune in all the a vailable channels.
24 GB KLV-46S200A 2-891-357- 11 (1) Timer Settings Sets the time r to turn on/off th e TV . Sleep Timer Sets a period of time after which the TV automaticall y switches itself into standby mode. When the “Sle ep Timer” is activated, the (Timer) indicator on the TV (front) lights up in amber.
25 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions PC Settings menu You can select th e options listed be low on the PC Settings menu. To select opt ions in “Settings”, see “Navigating through menus” (page 17). Wide Mode Selects a screen mode for di splaying input from your PC.
26 GB KLV-46S200A 2-891-357- 11 (1) Channel Setup menu You can change/set the Ch annel settings using the Channel Setup menu. To sele ct options in “Settings”, see “Navigating through menus” (page 17) . 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select a channel using one preset number button (0 - 9) on the remote.
27 GB KLV-46S200A 2-891-357- 11 (1) Using MENU Functions Manual Program Preset Before selecting “La bel”/“AFT”/“Audi o Filter”/“Skip” , press PROG +/ - to select the program number with the channel. You cannot select a program number that is set to skip.
28 GB KLV-46S200A 2-891-357- 11 (1) Connecting optional equipment Using Optional Equipment You can connect a wide range of optional equipmen t to your TV.
29 GB KLV-46S200A 2-891-357- 11 (1) Using Optional Equip ment Using the Tools me nu in PC input mode Press TOOLS to display th e following options when viewing pictures input from the connected PC. T o connect Do this S VHS/Hi8/DVC camcorder or video game equipment A Connect to the S video jack 2 or the video jack 2, and the audio jacks 2.
30 GB KLV-46S200A 2-891-357- 11 (1) Specifications Display Unit Power Requirements: 110–240 V AC, 50/60 Hz Screen Size: KLV-46S200A: 46 inches KLV-40S200A: 40 inches KLV-32S200A: 32 inches KLV-26S200A: 26 inches Display Resolution: 1,366 pixels (horizontal) × 768 lines (vertical) Power Consumption: Indicated on the rear of the TV.
31 GB KLV-46S200A 2-891-357- 11 (1) Additional Information Sound Output 10 W + 10 W Optional Accessories Wall-Mount bracket SU-WL51 (for KLV-46S200A/KLV-40S 200A) SU-WL31 (for KLV-32S200A/KLV-26S 200A) SU-WL53 (for KLV-46S200A/KLV-40S 200A/KLV-32S200A) Design and specifications are s ubject to change without notice.
32 GB KLV-46S200A 2-891-357- 11 (1) Troubleshooting Check wh ether the 1 ( standby) in dicator is fl ashing in re d. When it is flashing The self-diagnosis function is activated. 1 Measure how many times the 1 (standb y) indicator blink s. For example, the indicator blinks six times, and stops blinking for three seconds.
33 GB KLV-46S200A 2-891-357- 11 (1) Additional Information Prob lem Cause/Remedy Only sno w and noise appear on the screen • Check if the antenna is broken or bent. • Check if the antenna has reached the end of its serviceable life (three to fi ve years in normal use, one to tw o years at the seaside).
34 GB KLV-46S200A 2-891-357- 11 (1) Sound Prob lem Cause/Remedy No sound, b ut good picture • Press 2 +/– or % (Mute). • Check that “Speaker” is set to “On” in the “Setup” menu (page 24). Noisy sound • See the “Picture (dotted lines or stripes) noise” cause/remedy on page 33.
35 GB KLV-46S200A 2-891-357- 11 (1) Additional Information Index Numerics 1 Digit Direct 26 4:3 Default 22 A A/B button 12 Advanced Settings 19 AFT 27 All Reset 24 Antenna, connecting 4 Audio Filter 2.
Printed in Vietnam KDLV-46S200A 2-891-357- 11 (1) 010COV.book Page 36 Friday, September 8, 20 06 9:24 AM.
An important point after buying a device Sony KLV-26S200A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony KLV-26S200A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony KLV-26S200A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony KLV-26S200A you will learn all the available features of the product, as well as information on its operation. The information that you get Sony KLV-26S200A will certainly help you make a decision on the purchase.
If you already are a holder of Sony KLV-26S200A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony KLV-26S200A.
However, one of the most important roles played by the user manual is to help in solving problems with Sony KLV-26S200A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony KLV-26S200A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
